This hub-and-drum assembly fits 5,200-lb to 7,000-lb axles with #42 spindles. Compatible with electric or hydraulic brakes. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Pre-greased hub is easy to install - no need to pack bearings Sturdy iron construction Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included Hub and drum are made in the USA Specs: Application: 5,200-lb to 7,000-lb trailer axles with #42 spindles Drum dimensions: 12" diameter x 2" wide Works with 12" brake assembly Bolt pattern: 8 on 6-1/2" Grease cap flange diameter: 2.72" Wheel stud diameter: 9/16" Weight capacity: 3,500 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS-2250DL Inner diameter: 2.25" Outer diameter: 3.376" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
This kit includes everything you need to upgrade your triple-axle boat trailer or camper to disc brakes for improved performance and greater stopping power. The Maxx coating is even better than Dacromet for superior corrosion protection.
9/16" Wheel bolts are included in this brake kit. Allows you to switch your trailer over to disc brakes for improved performance and greater stopping power. Dacromet-coated brakes are corrosion resistant. Perfect for use with boat trailers.Features: Dacromet-coated brake kit has everything you need to switch your trailer over to disc brakes 6 Disc brake end kits Hub-and-rotor assemblies Grease seals, races, and bearings Calipers with mounting brackets and hardware - attach to 5-bolt brake flanges Hydrastar electric-over-hydraulic brake actuator Hardwires into tow vehicle and signals in-cab brake controller when brakes are applied, triggering pump and motor on actuator Creates smooth, even braking with fast response time Works with most in-cab brake controllers (sold separately) Line kit with brake lines and fittings for triple-axle trailers Disc brakes deliver better performance Consistent stopping even at highway speeds Shorter stopping distance than most drum brakes Trailer coupler not included Specs: Axle capacity: 7,000 lbs Bolt pattern: 8 on 6-1/2" Rotor diameter: 13" Wheel stud diameter: 9/16" Warranty: Actuator: 2 years Brakes and components: 1 year Bearings, Race, and Seal Information: Bearings Inner bearing 25580 Outer bearing: 14125A Races Inner race: 25520 Outer race: 14276 Seal: GS-2250DL Inner diameter: 2.250" Outer diameter: 3.376" Complete Kit Includes: Hydrastar electric-over-hydraulic trailer brake actuator 7K disc brake kit including hub-and-rotor assemblies with bearings, races, and seals Hydraulic triple-axle brake line kit (1) 30' Long brake line - 3/16" (1) 6' Long brake line - 3/16" (6) 4-1/4" Long brake lines - 3/16" (6) 18" Male/male rubber flex lines (3) 3/16" Brass T-fitting (2) 3/16" Brass union fitting (1) 3/16" Brass X-fitting 1/2" Nylon hose clamps 3/16" Nylon hose clamps Self-tapping screws Disc Brakes More and more people are switching their trailers over to disc brakes, and with good reason.
This hub-and-drum assembly fits 7,000-lb E-Z Lube axles with #42 spindles. Compatible with electric and hydraulic brakes. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and cone nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes E-Z Lube-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Bearings, races, grease seal, grease cap, wheel bolts, and 90-degree cone nuts are included Hub and drum are made in the USA Specs: Application: 7,000-lb E-Z Lube axles with #42 spindles Wheel size: 16" to 17-1/2" Drum dimensions: 12" diameter x 2" wide Works with 12" electric and hydraulic brake assemblies Bolt pattern: 8 on 6-1/2" Grease cap flange diameter: 2.72" Wheel stud diameter: 9/16"-18 Weight capacity: 3,500 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing : 25580 (1.750" inner diameter) Outer bearing: 14125A (1.250" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS-2250DL Outer diameter: 3.376" Inner diameter: 2.25" E-Z Lube-Compatible Hub for Simple Lubrication The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy.
Kit includes everything you need to switch your trailer over to disc brakes for improved performance and greater stopping power. Dacromet-coated brakes are corrosion resistant. Perfect for use with boat trailers.Features: All-inclusive kit has everything you need to switch your trailer over to disc brakes 6 Disc brake end kits Hub-and-rotor assemblies Grease seals, caps, races and bearings Calipers with mounting brackets and hardware - attach to 5-bolt brake flanges Hydrastar electric-over-hydraulic brake actuator Hardwires into tow vehicle and signals in-cab brake controller when brakes are applied, triggering pump and motor on actuator Creates smooth, even braking with fast response time Works with most in-cab brake controllers (sold separately) Line kit with brake lines and fittings for triple-axle trailers Disc brakes deliver better performance Consistent stopping even at highway speeds Shorter stopping distance than most drum brakes Trailer coupler not included Specs: Axle capacity: 7,000 lbs Bolt pattern: 8 on 6-1/2" Rotor diameter: 13" Wheel stud diameter: 1/2" Warranty: Actuator: 2 years Brakes and components: 1 year Bearings, Race, and Seal Information: Bearings Inner bearing 25580 Outer bearing: 14125A Races Inner race: 25520 Outer race: 14276 Seal: GS-2250DL Inner diameter: 2.250" Outer diameter: 3.376" Complete Kit Includes: Hydrastar electric-over-hydraulic trailer brake actuator 7K disc brake kit including hub-and-rotor assemblies with bearings, races, and seals Hydraulic triple-axle brake line kit (1) 30' Long brake line - 3/16" (1) 6' Long brake line - 3/16" (6) 4-1/4" Long brake lines - 3/16" (6) 18" Male/male rubber flex lines (3) 3/16" Brass T-fitting (2) 3/16" Brass union fitting (1) 3/16" Brass X-fitting 1/2" Nylon hose clamps 3/16" Nylon hose clamps Self-tapping screws Disc Brakes More and more people are switching their trailers over to disc brakes, and with good reason.
Stop a loaded triple-axle trailer with confidence. This Hydrastar plug-and-play kit upgrades you to 6K-rated disc brakes, a 1,600-psi EOH actuator, and brake lines- for smooth, powerful, spill-free braking.Specs Configuration: Triple axle kit Axle Rating: 6,000 lbs per axle Actuator: Max output: 1,600 psi Power: 12V DC Brake Hardware: Brake flange: 5-bolt Bolt pattern: 6 on 5-1/2 Wheel studs: 1/2" diameter Hydraulic port size: 3/16" Brake Lines: 24" main line 3/16" main line Rated for 3,000 psi Warranty: Actuator: 2-year limited Disc brake components: 3-year limited
Hey Nate, We do not have a 3/4" spindle nut or washer, the smallest option is the 7/8" spindle nut #165931and a 1" washer #SW1000. I cannot find anything smaller. Are you sure the threads on you're spindle are 3/4"? If they…
Hey Wes. The Ventline Northern Breeze Roof Vents have been discontinued and we do not have an of the replacement operator parts. None of our vendors have anything either. The only option I have for you is to replace it with a comparable roof vent.…
I do still have a few options for lifting the trailer but the Correct Track Trailer Alignment and Lift Kit part #RR23QX is indeed incompatible with the MORryde CRE3000 Equalizers. Therefore, you can either change these out to standard ones like the…
Hi Steve; are your brakes DeeMaxx? If they are, you can use the Replacement Guide Bolt and Sleeve Assembly for DeeMaxx 3,500-lb to 8,000-lb Disc Brakes #DE85FR. If you have something else let me know, most parts for disc brakes are brand specific but…
Sure, if you want to install the breakaway kit through the junction box, you would just need to make the connections that would normally run to the wiring harness, into the respective terminals inside the junction box. While we don't have a video…
We have the Bright Way Trailer Breakaway Kit #3802339 which is the entire kit. Or we have the Battery #3801250 and Charger #3802349 separately if your case is not damaged. The charger maintains the charge on the battery when connected to your…
Hello Steve, Yes, you can swap out your Kodiak 13inch Hub and Rotor - 8 on 6-1/2 - Dacromet - 9/16inch Bolts with the DeeMaxx 13" Hub-and-Rotor Assembly - 8 on 6-1/2 - Maxx Coating - 8,000 lbs - 9/16" Studs #DE42YR. What kind of trailer is…
Hi Joe, For the Dexter Hydraulic Trailer Brake - Right Hand #DX69CR you'll need part #bp04-162. If you need the left hand assembly #DX79CR shoes as well then you would need part #bp04-164.
There isn't a socket size because spindle nuts are not torqued down so sockets are not used; you'll want to use a channel lock or crescent wrench for the spindle nut on the Trailer Axle #e84YR.
Terry, you are a rare specimen, and a welcomed question-asker. Thanks for providing all of those fine details! To replace your current hub, you need the Dexter Trailer Idler Hub Assembly for 2,500-lb Axles #DX22XR. This comes with the correct…
If you can send me the diameter of the spindle where the grease seal sits and the diameter of the hub where the seal is pressed onto I can verify if we have the correct seal. Currently I do see we carry 2 hubs which use the Inner Bearing #LM67048 and…
Hub-and-rotor assembly makes it easy to change from drum brakes to disc brakes. Made of machined cast iron with a Maxx coating for excellent rust resistance, this 1-piece unit is balanced for a smooth ride. Water drains from the hat easily.Features: Single-piece assembly makes installation a snap, whether you're retrofitting or switching from drum brakes Machined process minimizes runout and warping Contaminants can't get in between rotor and hub Balanced unit provides a smooth ride Vented design effectively dissipates heat, preventing heat-related damage Drainage holes in the hat section allow water to drain easily, preventing corrosion 9/16" Wheel studs and industry-standard races are included Cast iron construction ensures a favorable friction coefficient for necessary stopping power Maxx coating provides superior corrosion resistance for freshwater or saltwater use Over 1,000-hour salt-spray rating Specs: Fits: Axle capacity: 8,000 lbs Wheel Size: 16" to 17-1/2" Bolt pattern: 8 on 6-1/2" Wheel bolt diameter: 9/16" Outer diameter: 13" 7-Year warranty Bearing, Race, and Seal Information: Bearings (sold separately) Inner bearing: 25580 Outer bearing: 02475 Races (included) Inner race: 25520 Outer race: 02420 Grease seal (sold separately): RG06-070
Fully assembled 10" brake drum and hub unit for 3,500 lb axles. Includes preinstalled bearings, seal, and 1/2" studs with a 5 on 4-1/2" pattern for a clean, reliable replacement.Features: One complete 10" hub-and-drum assembly for 3,500 lb trailer axles Pre-greased inner and outer bearings simplify installation Provides the braking surface for 10" electric or hydraulic drum brakes Races and zinc-plated 1/2" wheel studs come pre-installed Durable cast-iron construction for long-term performance Includes: Brake hub assembly Pre-greased inner (L68149) and outer (L44649) bearings Seal (10-19) Dust cap with plug 1-3/4" Cotter pin 1" 6-Slot castle nut (1"-14 threads, 1-1/2" hex, 9/16" tall) Spindle washer (1.03" ID, 1.68" OD) (5) 60-Degree cone lug nuts (fit 1/2"-20 studs) Specs: Axle rating: 3,500 lb Bolt pattern: 5 on 4-1/2" Brake size: 10" Stud size: 1/2" Wheel size compatibility: 12" to 15" Bearings: inner L68149, outer L44649 Seal: 10-19 Material: Cast iron Quantity: 1 assembly Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
Haul with confidence using DeeMaxx 13" hub-rotor assemblies with MAXX coating and threaded oil cap. Designed for 8K oil bath axles with 5/8" studs. Includes races. Works with most disc brake calipers and mounting brackets.Highlights Fits 8,000-lb Axles: Works with 16" - 17-1/2" wheels using 8 on 6-1/2" bolt pattern and 5/8" studs. Built to Handle Wet, Salty Conditions: Maxx coating resists corrosion with 1,000-hour salt-spray rating. Simplifies Drum-to-Disc Upgrades: One-piece hub-and-rotor design makes conversions quick and clean.
... Inner bearing (LM501349) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel studs, and wheel nuts are included.Features: Trailer hub assembly fits farm trailers Designed for non-braked axles Built-in grease fitting makes for fast, easy lubricating Grease seal, grease cap, (6) wheel nuts, and bearings are included Races and wheel studs come pre-installed in hub Specs: Application: 7,000-lb trailer axles with agricultural spindles Use with TRP spindle # SP-356200-130 Weight capacity (at max 20 mph): 3,500 lbs Bolt pattern: 6 on 6" Pilot hole diameter: 4.62" Grease cap flange diameter: 2.44" Wheel offset: 1.12" Bearing, Race, and Seal Information Bearings (included) Inner bearing: LM501349 (1.625" inner diameter) Outer bearing: LM67048 (1.25" inner diameter) Races (included) Inner race: LM501310 Outer race: LM67010 Grease seal (included): AG-GS-30662000SL Inner diameter: 2.000" Outer diameter: 3.066" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
... Inner bearing (JL69349) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel studs, and wheel nuts are included.Features: Trailer hub assembly fits farm trailers Designed for non-braked axles Built-in grease fitting makes for fast, easy lubricating Grease seal, grease cap, (6) wheel nuts, and bearings are included Races and wheel studs come pre-installed in hub Specs: Application: 7,000-lb trailer axles with agricultural spindles Use with TRP spindle SP-888175-105, SP-888200-125, or SP-888200-140 Weight capacity (at max 20 mph): 3,560 lbs Bolt pattern: 6 on 6" Pilot hole diameter: 4.62" Grease cap flange diameter: 2.446" Wheel offset: 1.12" Bearing, Race, and Seal Information Bearings (included) Inner bearing: JL69349 (1.4961" inner diameter) Outer bearing: LM67048 (1.25" inner diameter) Races (included) Inner race: JL69310 Outer race: LM67010 Grease seal (included): AG-GS-25661625SL Inner diameter: 1.625" Outer diameter: 2.566" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
... Inner bearing (387AS) and race, outer bearing (LM501349) and race, grease seal, grease cap, wheel studs, and wheel nuts are included.Features: Trailer hub assembly fits farm trailers Designed for non-braked axles Built-in grease fitting makes for fast, easy lubricating Grease seal, grease cap, (8) wheel nuts, and bearings are included Races and wheel studs come pre-installed in hub Specs: Application: 15,000-lb trailer axles with agricultural spindles Use with TRP spindle # SP-758300-160 Weight capacity (at max 20 mph): 7,500 lbs Bolt pattern: 8 on 8" Pilot hole diameter: 6" Grease cap flange diameter: 3.13" Wheel offset: -.38" Bearing, Race, and Seal Information Bearings (included) Inner bearing: 387AS (2.250" inner diameter) Outer bearing: LM501349 (1.625" inner diameter) Races (included) Inner race: 382A Outer race: LM-501310 Grease seal (included): AG-GS-40083000SL Inner diameter: 3.000" Outer diameter: 4.008" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
... Inner bearing (25590) and race, outer bearing (25877) and race, grease seal, grease cap, wheel studs, and wheel nuts are included.Features: Trailer hub assembly fits farm trailers Designed for non-braked axles Built-in grease fitting makes for fast, easy lubricating Grease seal, grease cap, (8) wheel nuts, and bearings are included Races and wheel studs come pre-installed in hub Specs: Application: 9,500-lb trailer axles with agricultural applications Use with TRP spindle # SP-778213-155 Weight capacity (at max 20 mph): 4,910 lbs Bolt pattern: 8 on 8" Pilot hole diameter: 6" Grease cap flange diameter: 3.16" Wheel offset: -1.50" Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25590 (1.796" inner diameter) Outer bearing: 25877 (1.375" inner diameter) Races (included) Inner race: 25520 Outer race: 25821 Grease seal (included): AG-GS-36282000SL Inner diameter: 2.000" Outer diameter: 3.628" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
... Inner bearing (3780) and race, outer bearing (2790) and race, grease seal, grease cap, wheel studs, and wheel nuts are included.Features: Trailer hub assembly fits farm trailers Designed for non-braked axles Built-in grease fitting makes for fast, easy lubricating Grease seal, grease cap, (8) wheel nuts, and bearings are included Races and wheel studs come pre-installed in hub Specs: Application: 11,500-lb trailer axles with agricultural spindles Use with TRP spindle # SP-819275-145 Weight capacity (at max 20 mph): 5,790 lbs Bolt pattern: 8 on 8" Pilot hole diameter: 6" Grease cap flange diameter: 3.16" Wheel offset: -1.50" Bearing, Race, and Seal Information Bearings (included) Inner bearing: 3780 (2.000" inner diameter) Outer bearing: 2790 (1.3125" inner diameter) Races (included) Inner race: 3720 Outer race: 2720 Grease seal (included): AG-GS-37562500SL Inner diameter: 2.500" Outer diameter: 3.756" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
Hub-and-rotor assembly makes it easy to change from drum brakes to disc brakes. Made of machined cast iron with a Maxx coating for excellent rust resistance, this 1-piece unit is balanced for a smooth ride. Water drains from the hat easily.Features: Single-piece assembly makes installation a snap, whether you're retrofitting or switching from drum brakes Machined process minimizes runout and warping Contaminants can't get in between rotor and hub Balanced unit provides a smooth ride Vented design effectively dissipates heat, preventing heat-related damage Drainage holes in the hat section allow water to drain easily, preventing corrosion 5/8" Wheel studs and industry-standard races are included Cast iron construction ensures a favorable friction coefficient for necessary stopping power Maxx coating provides superior corrosion resistance for freshwater or saltwater use Over 1,000-hour salt-spray rating Specs: Fits: Axle capacity: 8,000 lbs Wheel Size: 16" to 17-1/2" Bolt pattern: 8 on 6-1/2" Wheel bolt diameter: 5/8" Outer diameter: 13" 7-Year warranty Bearing, Race, and Seal Information: Bearings (sold separately) Inner bearing: 25580 Outer bearing: 02475 Races (included) Inner race: 25520 Outer race: 02420 Grease seal (sold separately): RG06-070
Install this hub-and-drum assembly on your trailer. Fits 5,200-lb to 7,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Pre-greased hub is easy to install - no need to pack bearings E-Z Lube-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included Hub and drum are made in the USA Specs: Application: 5,200-lb to 7,000-lb E-Z Lube trailer axles with #42 spindles Drum dimensions: 12" diameter x 2" wide Works with 12" brake assembly Bolt pattern: 8 on 6-1/2" Grease cap flange diameter: 2.72" Wheel stud diameter: 1/2" Weight capacity: 3,500 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS-2250DL Inner diameter: 2.25" Outer diameter: 3.376" E-Z Lube-Compatible Assembly for Simple Lubrication The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy.
Trailer axle measures 49-1/2" from hub face to hub face and 38-7/16" from Spring center to spring center. Includes fully pre-assembled studded hubs. Made for a 40" frame.Features: Square axle beam acts as part of your trailer' suspension system Replaces an axle on your trailer Straight spindles - no drop Studded hubs are sturdy and corrosion resistant Bearings, races, seals, grease caps, wheel studs, lug nuts, and quality calcium-sulfonate grease included Specs: Weight capacity: 1,800 lbs Hub-face-to-hub-face length: 49-1/2" Spring-center-to-spring-center length: 38-7/16" Overall beam length: 54" Hub bolt pattern: 5 on 4-1/2"
They last longer and shine brighter while using less power. Bolt-On Installation: Stud Mount With a standard stud mount design, this light is easy to install and stays secure. Specs Dimensions Dimensions: 10-1/8" tall x 5-3/8" wide x 7/8" thick Technical Specifications Diodes: 26 Voltage: 12V Warranty Lifetime warranty on LEDs
This compact stud-mounted marker light gives you bright, reliable visibility and the flexibility to meet PC or P2 requirements depending on how you mount it, all while keeping fasteners hidden for a clean finish.The housing is also UV-resistant to prevent fading or cracking from sun exposure. Clean Mounting Solution: Stud Mount with No Visible Fasteners If youre after a clean, finished look, the stud mount design makes it easy. The stainless steel ground stud anchors the light securely while hiding any mounting hardware from view.
Replace a worn or broken trailer marker light with this red incandescent clearance/side marker light. Stud-mounted light grounds through the mounting stud and includes a 24" lead wire.Road-Ready Marker Position: Marks the side or rear of your trailer for DOT-compliant lighting. Simple Stud Ground: Mounting stud grounds the light when installed on a metallic surface. Power Lead Already Attached: Single 24" lead wire connects the light to trailer power.
Replacement right passenger side LED tail light Single stud mount Waterproof Fits Waterproof, Under 80" LED Trailer Light Kit with 25' Wiring Harness Kit (TLL9RK) Qty. 1 tail light STL-6RS Single Stud Mount LED Tail Light - Right/Passenger Side
Stud cleaning tool allows you to quickly clean the rusted and corroded 1/2" wheel studs on your car or trailer. Stainless steel brush efficiently cleans studs to ensure proper wheel mounting. ... Features: Stud cleaning tool allows you to quickly clean rusted and corroded 1/2" wheel studs Clean studs allow for proper wheel mounting Includes stud cleaning tool, stainless steel brush cartridge, and 1/2" drive adapter Requires handheld drill (not included) or Counteract air driver (CA39FR - sold separately)
Brush inserts work with Counteract stud cleaning tools (CA97FR - sold separately) to quickly clean rusted and corroded wheel studs sized 1/2".Features: Brush inserts work with Counteract stud cleaning tools (CA97FR - sold separately) to quickly clean rusted and corroded wheel studs Stainless steel brushes efficiently clean studs to allow for proper wheel mounting Includes 1 stainless steel brush cartridge Cleans stud sizes 1/2"
Filters
