Use any 18-volt or 24-volt cordless drill (not included) to power this side-mountjack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.Trailer Valet solves this issue by applying a rough powder coat finish on top of the zinc-nickel plated outer tube that's harder to scuff and scratch. Basically, by giving the jack a rougher "terrain," this finish helps keep the jack from aging too quickly. How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
You're hauling equipment, not lawn chairs. The trailer's loaded and this jack's ready. It welds to the frame, slides on when you need it, and lifts with a drill or by hand. When you're done, pull it off and toss it in the truck.The jack slides on and off the mount for transport or security, and it comes with a Trailer Valet drill attachment that works with your cordless drill.
Flats happen fast. This sidemount carrier keeps your spare on the tongue where you can grab it quickly. The hot-dip galvanized finish keeps the hardware from seizing up so the swap is quick and you're back on the road.Features to know about Why a Side-Mount Carrier Makes Sense When a tire blows, you don't want to fight with an awkward spare. Some trailers carry the tire upright on the tongue, but that can crowd your jack or winch.
Flats happen fast. This sidemount carrier keeps your spare on the tongue where you can grab it quick. Heavy steel with a zinc finish holds it tight, even around saltwater, so your spare is ready when you need it most.Side-Mount Advantage: Mounting on the tongue keeps the tire out of the way but easy to reach, without eating into your trailer's deck space.
Just pull the easy-to-access pin on this jack to drop the entire jack tube down for quick, easy adjustment. No drop leg needed. Seven height settings offer up to 12" of drop. ... On a standard drop leg jack, the release pin is tucked away under the trailer frame. The release pin on this jack is conveniently located right above the mount for easy access.
Fixed-leg, compact jack with heavy-duty footplate base welds directly onto your application and offers superior side-load strength in a tight-fitting package. ... Features: Superior side-load capacity compared with round jacks Outer and inner tubes overlap for additional strength when jack is fully extended Square design provides additional support for side loading Compact design is perfect for tight applications Durable, long-lasting construction Weather-resistant coating on outer tube and zinc inner tube Screw-nut stop prevents damage to screw and/or nut when jack is fully extended Sidewind handle has smooth, ergonomic design for easy cranking Fixed-leg jack welds directly to application Heavy-duty footplate included ASABE compliant Specs: Bracket height: 17-13/16" Retracted 27-13/16" Extended Lift: 10" Tubing width: 2-1/2" Handle radius: 8-1/2" Lift capacity: 5,000 lbs Static capacity: 8,000 lbs Limited 5-year warranty
Retaining-ring swivel jack easily swings up for travel and down for use. Features a 14-1/2" retracted height and measures 10" from mounting bracket to top, excluding handle. ... Features: Utility jack is perfect for agricultural and commercial applications Convenient, spring-loaded, plunger-pin swivel feature Swing up to stow parallel to tongue for travel Move back into upright position for use Precision-fit parts provide exceptional stability and reliability Topwind handle has smooth, ergonomic design for easy cranking Outer tube has gray paint finish Inner tube is zinc plated Weld-on, L-bend mounting bracket and footplate included Specs: Bracket height: 14-1/2" Retracted 29-1/2" Extended Lift: 15" Clearance: 10" from mounting bracket to top of jack Inner tube diameter: 2" Outer tube diameter: 2-1/4" Lift capacity: 2,000 lbs Limited 1-year warranty
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg. The durable jack screw offers increased strength- lifts up to 5 tons, and supports 6. ... Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Easily-to-reach side-facing plunger pin deploys the drop leg Works best for setups where the jack is located behind the A-frame Spring return retracts the drop leg hands-free Drop leg extension makes up about half of the total travel Cuts time spent cranking, adjusting, and leveling in half Heayv-duty internal compotents Durable 1" jack screw allows for heavy lifting Smooth screw travel - a second thrust bearing reduces friction and heat buildup Weather-resistant black painted inner and outer tubes Easy to maintain even in a long life of hard work Grease zerk fittings help keep gears working smoothly Footplate minimizes sinking in soft ground Weld-on installation Includes sidewind handle Cross shaft sold separately Specs: Lift capacity: 10,000 lbs Support capacity : 12,000 lbs Total travel: 25-3/4" Screw travel : 12-1/4" Drop leg travel : 13-1/2" Overall height: Retracted: 28" Extended: 40-1/4" Drive pin diameter: 1" 3/8" Diameter mounting hole Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing: 3-3/8" on center 1-Year warranty How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg. The durable jack screw offers increased strength. The built-in grease zerk allows for effortless greasing. ... Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Footplate minimizes sinking in soft ground Weld-on installation Handle (TJD-12000-HD) sold separately Specs: Lift capacity: 10,000 lbs Support capacity : 12,000 lbs Total travel: 25-3/4" Screw travel : 12-1/4" Drop leg travel : 13-1/2" Overall height: Retracted: 28" Extended: 40-1/4" Drive pin diameter: 1" 3/8" Mounting hole diameter Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing: 3-3/8" on center 1-Year warranty How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
Weld-on, pipe-mount swivel jack pivots up for travel, down for use. Square design provides side-load support. Retracted height is 14-1/2". Extended height is 29-1/2". ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Belly band welded to the outer tube provides extra strength Sidewind handle has zinc finish for attractive look and rust resistance Drop leg allows for increased lift and saves time when raising or lowering Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included female pipe mount Specs: Jack height (from bottom of foot to center of pipe mount): 14-1/2" Retracted 29-1/2" Extended Total lift: 28-1/2" Screw travel: 15" Drop leg travel: 13-1/2" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Outer tube width: 2-1/2" Inner tube width: 2-1/4" Footplate dimensions: 8" long x 6" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8-1/8" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
This fixed-leg, swivel jack pivots up for travel and down for use. Square design provides superior side-load support. Jack has a retracted height of 15-3/4" and an extended height of 31". ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Sidewind handle has zinc finish for attractive look and rust resistance Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation Pipe mount (included) is required for installation Specs: Bracket height (from bottom of foot to center of pipe mount): 15-3/4" Retracted 31" Extended Travel: 15-1/4" Clearance: 8-1/2" from center of pipe mount to top of jack Outer tube width: 2-1/4" Inner tube width: 2" Footplate dimensions: 7" long x 4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Pipe mount pin hole diameter: 5/8" Handle radius: 8-1/2" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
Fixed leg jack with heavy-duty footplate base and swivel mount offers superior side-load strength in a compact package. Jack has 11-3/8" retracted height and measure 4-1/4" from mounting bracket to top, excluding handle. ... Features: Superior side-load capacity compared with round jacks Outer and inner tubes overlap for additional strength when jack is fully extended Square design provides additional support for side loading Compact design is perfect for tight applications Tubular swivel design lets you swing jack up for travel, down for use Included pull pin holds jack in place Durable, long-lasting construction Weather-resistant coating on outer tube and zinc inner tube Screw-nut stop prevents damage to screw and/or nut when jack is fully extended Topwind handle has smooth, ergonomic design for easy cranking Includes bushing in top cap and "eagle claw" grip Round, tubular mount and heavy-duty footplate included ASABE compliant Specs: Bracket height: 11-3/8" Retracted 21-3/8" Extended Lift: 10" Clearance: 4-1/4" from mounting bracket to top of jack Tubing width: 2-1/2" Handle radius: 9" Lift capacity: 5,000 lbs Static capacity: 8,000 lbs Limited 5-year warranty
With a jack on each side of your trailer, it's easy to get it up off the ground for routine maintenance or a roadside emergency. The bolt-on mounting plates give you a lot of freedom to place the jacks where you want them, with no welding.Here's what we love about this kit: 2 Jacks. Place one on each side of your trailer and get it up off the ground 2 Bolt-on mounting plates. No welding! Put them where you want them Includes bolts and hardware Swivel design.
With a jack on each side of your trailer, it's easy to get it up off the ground for routine maintenance or a roadside emergency. The bolt-on mounting plates give you a lot of freedom to place the jacks where you want them, with no welding.Here's what we love about this kit: 2 Jacks. Place one on each side of your trailer and get it up off the ground 2 Bolt-on mounting plates. No welding! Put them where you want them Includes bolts and hardware Swivel design.
This fixed-leg, swivel jack pivots up for travel and down for use. Square design provides superior side-load support. Jack has a retracted height of 14-7/8" and an extended height of 30-3/8". ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Topwind handle has red claw grip for comfortable, easy cranking Easily folds away for storage Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation Specs: Bracket height (from bottom of foot to center of pipe mount): 14-7/8" Retracted 30-3/8" Extended Travel: 15-1/2" Outer tube width: 2-1/4" Inner tube width: 2" Footplate dimensions: 7" long x 4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 9-1/2" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
Square-tube jack is ideal for supporting heavy pontoon or bowrider trailers. Footplate is more stable than caster wheels. Total lift is 15-3/8" of screw travel plus 13-3/4" of drop leg travel. ... Features: Supports, lifts, and lowers your trailer Reduces time spent cranking when the drop leg is released Drop leg helps bridge the gap to the ground Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Resists rust and corrosion with clear zinc finish Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around trailer frame Includes mounting bracket and hardware Specs: Application: trailer frames up to 5" tall x 3" wide Lift capacity: 2,500 lbs Bracket height: Retracted: 7-1/4" Extended: 22-5/8" Total lift: 29-1/8" Screw travel : 15-3/8" Drop leg travel : 13-3/4" Inner tube width: 2" Outer tube width: 2-1/4" Mounting bracket dimensions: 6-1/2" long x 6-1/2" wide Handle radius: 7-7/8" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 3-1/2" Between center of hole on bottom and center of nearest hole 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
Included weld-on pipe mount lets you pivot jack up for travel and down for use. Retracted height is 14-1/2". Extended height is 29-7/8". Drop leg offers 13-1/2" of lift on top of 15-3/8" of screw travel.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Topwind handle has red claw grip for comfortable, easy cranking Easily folds away for storage Drop leg allows for increased lift and saves time when raising or lowering Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included female pipe mount Specs: Jack height (from bottom of foot to center of pipe mount): 14-1/2" Retracted 29-7/8" Extended Total lift: 28-7/8" Screw travel: 15-3/8 Drop leg travel: 13-1/2" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Outer tube width: 2-1/2" Inner tube width: 2-1/4" Footplate dimensions: 7-7/8" long x 5-7/8" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 9-1/4" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
... Weld-on pipe mount included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Sidewind handle has zinc finish for attractive look and rust resistance Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included female pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 15-5/8" Retracted 31-1/8" Extended Travel: 15-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-7/8" long x 5-7/8" wide Pipe mount diameter: Male mount welded on jack: Inner: 2" Outer: 2-1/2" Female mount to weld on to trailer: Inner: 2-1/2" Outer: 3" Handle radius: 8-1/8" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs 1-Year warranty
... Weld-on pipe mount included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Sidewind handle has zinc finish for attractive look and rust resistance Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 15-1/4" Retracted 30-1/8" Extended Travel: 14-7/8" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 6-1/2" Lift capacity: 2,000 lbs Support capacity: 3,000 lbs 1-Year warranty
... Weld-on pipe mount included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Sidewind handle has zinc finish for attractive look and rust resistance Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 10-1/4" Retracted 20-1/4" Extended Travel: 10" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7" long x 4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8-1/8" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
... Weld-on pipe mount included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Sidewind handle has zinc finish for attractive look and rust resistance Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 15-5/8" Retracted 31-1/8" Extended Travel: 15-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/4" Handle radius: 8" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
... Weld-on pipe mount included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Sidewind handle has zinc finish for attractive look and rust resistance Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 10-3/8" Retracted 20-5/8" Extended Travel: 10-1/4" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 8" long x 6" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8-1/4" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs 1-Year warranty
Great for construction and agricultural trailers, this jack includes a heavy-duty, versatile mount that lets you easily install it and also keeps the jack up and out of the way when it's not in use.Features: Heavy-Duty Use: Built for trailers that tow construction equipment, agricultural machinery, and other heavy cargo Strong, Durable Mount: Innovative, heavy-duty bracket gives excellent support for a side-mountjack Bracket also makes it easy to remove the jack and remount it out of the way for travel Extended Lift: Drop leg pairs with the already substantial travel to get your trailer raised Strudy and Dependable: Solid steel construction Made in the USA and designed by US Military Veteran Specs: Height (from bottom of foot to top of jack): 24-3/4" Retracted 40-1/8" Extended Total lift: 28" Screw travel: 15" Drop leg travel: 13" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Limited lifetime warranty
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud. Premium zinc finish offers great rust protection. 10" Screw travel and 8" drop leg.After all, who wants to take a trailer if they can't get the jack to work? This jack has a pipe-mount style design, which means you pull a non-spring-loaded pin to release the jack so it can swing up or down.
Filters
