Sensor adheres to the outside of your RV's holding tank to measure its fluid levels, and it sends those readings to a SeeLeveL monitor (sold separately) inside your RV. ... Easy Install If you're comfortable with basic wiring, installing the SeeLeveL monitoring system should be a straightforward DIY project. A single 6" sensor can measure a tank as tall as 7". For a shorter tank, the sensor can be trimmed.
Sensor adheres to the outside of your RV's holding tank to measure its fluid levels, and it sends those readings to a SeeLeveL monitor (sold separately) inside your RV. ... This design was also made to read up to 7 tanks with the SeeLeveL Soul system. If your RV has a SeeLeveL Soul tank monitoring system installed from the factory, this is the sensor you need to get if you need a replacement.
Sensor adheres to the outside of your RV's holding tank to measure its fluid levels, and it sends those readings to a SeeLeveL monitor (sold separately) inside your RV. ... This design was also made to read up to 7 tanks with the SeeLeveL Soul system. If your RV has a SeeLeveL Soul tank monitoring system installed from the factory, this is the sensor you need to get if you need a replacement.
If your RV tank monitor readings change from 25% to empty in the blink of an eye, that's a problem. SeeLeveLsensors track 3 holding tanks with single-digit accuracy at the monitor. Also displays your propane level and battery voltage.If you're not sure, check the tank itself. If the gauge has a wired sensor attached to it, you can connect it to the SeeLeveL monitor. SeeLeveLsensors used for fresh, gray, and black tanks will not work on metal tanks of any kind, including LPG tanks.
If your RV tank monitor readings change from 25% to empty in the blink of an eye, that's a problem. SeeLeveLsensors track 2 holding tanks with single-digit accuracy at the monitor. Also displays battery voltage and includes water pump switch.Features: Monitoring system tracks and displays the levels of your RV's holding tanks at the push of a button Hardwires to SeeLeveLsensors - includes (2) 12" sensors for fresh, gray, and black tanks Sensors mount to the outside of the holding tanks rather than using interior probes Prevents false readings caused by accumulating debris Provides readings with single-digit accuracy Can be trimmed or stacked with an additional sensor to match your tank size Display monitor also shows your battery voltage Diagnostic mode checks status and signal strength of sensors Error codes alert you of any issues - check the manual for suggested solutions Integrated switch activates water pump 3-Way function lets you connect to switches in your bathroom, kitchen, or elsewhere Multiple monitors can be used so you can check tank status from the service bay and inside your RV Easy installation - cut hole for recessed mount monitor, attach sensors on tanks, and hardwire together Includes pigtail needed for installation Tabs on top of sensor are trimmed to indicate which tank it is on Length can be trimmed every 1-1/2" to match the height of your tank Bus wiring lets all sensors splice together to one line Existing wiring from your old tank monitor system can be used to ease install Specs: Application: 2 tank systems for RVs and motorhomes 1 sensor can accommodate 5" - 13" tall tanks Stack additional sensor to accommodate tanks up to 25" tall Monitor dimensions: 4" wide x 2-13/16" tall x 1-1/4" deep Operating temperature range: 32 F - 140 F Operating voltage range: 11V - 16V Sensor quantity: 2 Sensor length: 12" 1-Year limited warranty Note: SeeLeveL tank monitoring systems are not compatible with metal tanks.
If your RV tank monitor readings change from 25% to empty in the blink of an eye, that's a problem. SeeLeveLsensors track 3 holding tanks with single-digit accuracy at the monitor. Also displays battery voltage and includes water pump switch.Features: Monitoring system tracks and displays the levels of your RV's holding tanks at the push of a button Hardwires to SeeLeveLsensors - includes (3) 12" sensors for fresh, gray, and black tanks Sensors mount to the outside of the holding tanks rather than using interior probes Prevents false readings caused by accumulating debris Provides readings with single-digit accuracy Can be trimmed or stacked with an additional sensor to match your tank size Display monitor also shows your battery voltage Diagnostic mode checks status and signal strength of sensors Error codes alert you of any issues - check the manual for suggested solutions Integrated switch activates water pump 3-Way function lets you connect to switches in your bathroom, kitchen, or elsewhere Multiple monitors can be used so you can check tank status from the service bay and inside your RV Easy installation - cut hole for recessed mount monitor, attach sensors on tanks, and hardwire together Includes pigtail needed for installation Tabs on top of sensor are trimmed to indicate which tank it is on Length can be trimmed every 1-1/2" to match the height of your tank Bus wiring lets all sensors splice together to one line Existing wiring from your old tank monitor system can be used to ease install Specs: Application: 3 tank systems for RVs and motorhomes 1 sensor can accommodate 5" - 13" tall tanks Stack additional sensor to accommodate tanks up to 25" tall Monitor dimensions: 4" wide x 2-13/16" tall x 1-1/4" deep Operating temperature range: 32 F - 140 F Operating voltage range: 11V - 16V Sensor quantity: 3 Sensor length: 12" 1-Year limited warranty Note: SeeLeveL tank monitoring systems are not compatible with metal tanks.
Hey Gadea, we only have the panel part #SE74VR available by itself so you'd need to order the sensors separately like with the part #SE88VR for 9 inch tall sensors or part #SE78VR for 12 inch sensors.
The best replacement option we offer for a Atwood GC10A-4E Water Heater is tankless, the Furrion RV Tankless Water Heater part #FR68SR. It won't be a direct replacement but still pretty easy nonetheless as they are very similar. That said, you…
While we don't have a set of printed instructions I can show you for the Dexter EZ Flex part #K71-657-00 that you referenced we do have install videos that we shot when we installed this kit on two trailers that I attached to this page.
From what I could find out, the Dexter axle you have on your Airstream uses an inner bearing #25580 and an outer bearing #LM67048. With that being said, the hub you will need is the Dexter #8-201-5UC3-EZ. This will include the bearings, seal, EZ-Lube…
Thank you for all of the info you mentioned as that allows me to know that the Dexter 8-219 hub you have has a seal part number of #GS-2250DL which has an inner diameter of 2.25 inches. For a bearing kit that comes with this seal as well you'd…
Hello Vincent, thanks for reaching out. We do have a great option for replacing your Carrier model 68RV0010 KA AC unit. For that I recommend the Advent AC item #ACCAR135 for 13,500 BTU or item #ACCAR150 for 15,000 BTU. These units come with an…
As long as one of the wires coming from the back of the hub is a ground and the other is a power, it does not matter which wire on the magnet goes to which wire from the back of the hub. I have included a link to a video of a magnetic brake…
If you have a 7-Way on both your trailer and tow vehicle you will first want to make sure that you have a brake controller, like the Tekonsha Prodigy P3 #90195. A brake controller is what is used to send power from the tow vehicle and tells the…
We do have an aluminum gear box replacement that is confirmed to fit Atwood landing gear setups with the part #LC276602 which would fix the problem you are having.
We don't sell High Pointe parts and I wouldn't know where to get replacements but we do have an option for a replacement rack: - Replacement Round Cooking Rack for Hisense Over-the-Range Microwave #324-000151 This rack measures 11-15/16"…
The trailer fuse locations for a 2021 Ram 2500 can be found either in your owner's manual or on the underside of the fuse box lid. I have attached them for you below as well. F28 20 Amp Blue – Trailer Tow Backup Lights F29 20 Amp Blue – Trailer…
I spoke to my contact at Fan-Tastic and they informed me that the Replacement Dome for Fan-Tastic Vent RV Roof Vents part #FVK1020-19 is a direct replacment for your "K2020-82" roof vent cover. For a vent cover that will allow for you to…
If your RV tank monitor readings change from 25% to empty in the blink of an eye, that's a problem. SeeLeveLsensors track 3 holding tanks with single-digit accuracy at the monitor. Can send readings to a primary control panel in multiplex RVs.Features: Monitoring system tracks and displays the levels of your RV's holding tanks at the push of a button Hardwires to SeeLeveLsensors - includes (3) 12" sensors for fresh, gray, and black tanks Sensors mount to the outside of the holding tanks rather than using interior probes Prevents false readings caused by accumulating debris Provides readings with single-digit accuracy Can be trimmed or stacked with an additional sensor to match your tank size Display monitor also shows your battery voltage Diagnostic mode checks status and signal strength of sensors Error codes alert you of any issues - check the manual for suggested solutions Compatible with RV-C multiplex systems to display tank levels on your center console Multiple monitors can be used so you can check tank status from the service bay and inside your RV Easy installation - cut hole for recessed mount monitor, attach sensors on tanks, and hardwire together Includes pigtail needed for installation Tabs on top of sensor are trimmed to indicate which tank it is on Length can be trimmed every 1-1/2" to match the height of your tank Bus wiring lets all sensors splice together to one line Existing wiring from your old tank monitor system can be used to ease install Specs: Application: 3 tank systems for RVs and motorhomes 1 sensor can accommodate 5" - 13" tall tanks Stack additional sensor to accommodate tanks up to 25" tall Monitor dimensions: 4" wide x 2-13/16" tall x 1-1/4" deep Operating temperature range: 32 F - 140 F Operating voltage range: 11V - 16V Sensor quantity: 3 Sensor length: 12" 1-Year limited warranty Note: SeeLeveL tank monitoring systems are not compatible with metal tanks.
If your RV tank monitor readings change from 25% to empty in the blink of an eye, that's a problem. This monitor uses SeeLeveLsensors (sold separately) for single-digit accuracy. Also displays your propane level and battery voltage.If you're not sure, check the tank itself. If the gauge has a wired sensor attached to it, you can connect it to the SeeLeveL monitor. SeeLeveLsensors used for fresh, gray, and black tanks will not work on metal tanks of any kind, including LPG tanks.
If your RV tank monitor readings change from 25% to empty in the blink of an eye, that's a problem. This monitor uses SeeLeveLsensors (sold separately) for single-digit accuracy. Also displays your propane level and features a water pump switch.If you're not sure, check the tank itself. If the gauge has a wired sensor attached to it, you can connect it to the SeeLeveL monitor. SeeLeveLsensors used for fresh, gray, and black tanks will not work on metal tanks of any kind, including LPG tanks.
... This monitor is compatible with multiplex, RV-C systems so you can get improved readings at your primary control panel. Accurately tracks 3 holding tanks using SeeLeveLsensors (sold separately).If you're not sure, check the tank itself. If the gauge has a wired sensor attached to it, you can connect it to the SeeLeveL monitor. SeeLeveLsensors used for fresh, gray, and black tanks will not work on metal tanks of any kind, including LPG tanks.
If your RV tank monitor readings change from 25% to empty in the blink of an eye, that's a problem. This monitor uses SeeLeveLsensors (sold separately) for single-digit accuracy. Also displays battery voltage and features a water pump switch.When you're keeping an eye on how much fresh water you have, the difference between 25% full and empty means a lot, and that inaccuracy can be a problem. The SeeLeveL tank monitoring system uses technology that can sense fluid levels from the outside of the tank. The sensors' flexible circuit board sticks in place and measures along its entire height.
... This monitor is compatible with multiplex, RV-C systems so you can get improved readings at your primary control panel. Accurately tracks 3 holding tanks using SeeLeveLsensors (sold separately).When you're keeping an eye on how much fresh water you have, the difference between 25% full and empty means a lot, and that inaccuracy can be a problem. The SeeLeveL tank monitoring system uses technology that can sense fluid levels from the outside of the tank. The sensors' flexible circuit board sticks in place and measures along its entire height.
If your RV tank monitor readings change from 25% to empty in the blink of an eye, that's a problem. This monitor uses SeeLeveLsensors (sold separately) for single-digit accuracy. Also displays battery voltage and features a water pump switch.When you're keeping an eye on how much fresh water you have, the difference between 25% full and empty means a lot, and that inaccuracy can be a problem. The SeeLeveL tank monitoring system uses technology that can sense fluid levels from the outside of the tank. The sensors' flexible circuit board sticks in place and measures along its entire height.
If your RV tank monitor readings change from 25% to empty in the blink of an eye, that's a problem. This monitor uses SeeLeveLsensors (sold separately) for single-digit accuracy. Also displays your battery voltage.When you're keeping an eye on how much fresh water you have, the difference between 25% full and empty means a lot, and that inaccuracy can be a problem. The SeeLeveL tank monitoring system uses technology that can sense fluid levels from the outside of the tank. The sensors' flexible circuit board sticks in place and measures along its entire height.
If your RV tank monitor readings change from 25% to empty in the blink of an eye, that's a problem. This monitor uses SeeLeveLsensors (sold separately) for single-digit accuracy. Also features water heater and water pump switches.When you're keeping an eye on how much fresh water you have, the difference between 25% full and empty means a lot, and that inaccuracy can be a problem. The SeeLeveL tank monitoring system uses technology that can sense fluid levels from the outside of the tank. The sensors' flexible circuit board sticks in place and measures along its entire height.
... This monitor is compatible with multiplex, RV-C systems so you can get improved readings at your primary control panel. Accurately tracks 3 holding tanks using SeeLeveLsensors (sold separately).When you're keeping an eye on how much fresh water you have, the difference between 25% full and empty means a lot, and that inaccuracy can be a problem. The SeeLeveL tank monitoring system uses technology that can sense fluid levels from the outside of the tank. The sensors' flexible circuit board sticks in place and measures along its entire height.
You plan every trip carefully, but water and waste don't always follow your schedule. With percentage-based readings, alarms, and Bluetooth smartphone access, this monitor ensures you'll always know when its time to fill, dump, or refuel.Specs: Application Supports: 2 fresh, 2 gray, 2 black, and LPG tanks (LPG button can be used for 3rd gray) Works with SeeLeveL Senders (sold separately) Monitor Dimensions 4" wide x 2-13/16" tall x 1-1/4" deep Operating Conditions Temperature range: 32 F - 140 F Voltage range: 11V - 16V Warranty 1-year limited warranty
Get an accurate reading of waste levels in your RV's black-water tank. Extra-long sensors are surrounded by Teflon to prevent false probe contact and incorrect sensor readings. Fits 3/8" diameter holes. Connects to existing wiring.Features: Provides an accurate indication of waste levels in your RV's black-water tank Prevents false probe contact and incorrect sensor readings Delrin body and Teflon tube surround sensor to prevent liquid residue or sludge from sticking to sensor Considerably longer than standard probes to prevent false readings from buildup on sides of tank Easy to install - fits 3/8" diameter holes Use existing holes or drill new holes next to existing probes Designed for RVs built to RVIA , CSA , and IAPMO standards Connects to existing wiring and monitors Quantity: 4 probes How Miracle Probes Work The monitor for your RV's black water tank shows a full reading when electricity is flowing between the tank's sensors.
Get an accurate reading of waste levels in your RV's gray-water tank. Extra-long sensors are surrounded by Teflon to prevent false probe contact and incorrect sensor readings. Fits 3/8" diameter holes. Connects to existing wiring.Features: Provides an accurate indication of waste levels in your RV's gray-water tank Prevents false probe contact and incorrect sensor readings Delrin body and Teflon tube surround sensor to prevent liquid residue or sludge from sticking to sensor Considerably longer than standard probes to prevent false readings from buildup on sides of tank Easy to install - fits 3/8" diameter holes Use existing holes or drill new holes next to existing probes Designed for RVs built to RVIA , CSA , and IAPMO standards Connects to existing wiring and monitors Quantity: 4 probes How Miracle Probes Work The monitor for your RV's gray water tank shows a full reading when electricity is flowing between the tank's sensors.
Stop worrying about potential power issues when you're away from your RV by linking this monitor station to your Power Watchdog unit. Connects to Wi-Fi to deliver real time data on watts, volts, amps, and power alerts right to your smartphone.Features: Monitor station connects to Wi-Fi and links to your Power Watchdog unit to send power source data to your smartphone Watts, volts, amps, and power alerts are provided via texts and emails and can be viewed in the mobile app (available for IOS and Android) Included temperature sensor allows you to monitor the temperature and relative humidity inside your RV Ensure that your pet is safe back in the RV while you're out on a hot day System can monitor power conditions from miles away Keep an eye on battery charge conditions while your RV is in storage Expand your setup to fit your needs with further sensor options (sold separately)
Replaces the rain sensor for your MaxxAir RV or trailer roof vent fan (00-04500K or 00-04751KSX).Features: Replaces the rain sensor for your MaxxAir RV or trailer roof vent fan (00-04500K or 00-04751KSX)
The rain sensor on this powered roof vent automatically closes the dome and shuts off the fan in rain or snow. The reversible, 10-speed fan has a thermostat to regulate airflow inside your RV. ... Automatic Rain Sensor The MaxxFan Plus has a rain sensor that detects when it starts to rain or snow. The sensor then automatically closes the roof vent and shuts the fan off, preventing the interior of your RV or trailer from getting wet.
... This hub keeps everything working together, from temps to lights and sensors, so comfort stays where you set it and you can focus on the day, not your pets or your RV.Highlights Control Your RV From Anywhere: Manage HVAC, lights, outlets, and sensors from one app at home or on the road. Works With the Setup You Already Trust: Supports most RV HVAC systems, R32 A/C units, and select smart accessories.
One touch brings your RV's controls together. The color touchscreen auto-dims as daylight changes, so checks are easy at noon or midnight. Mount it the way you prefer and plug in with the included cables for a clean, simple install.Highlights One Screen For Your System: Check battery percent, solar watts, and inverter status at a glance. Auto Dimming: Built-in light sensor adjusts brightness for day and night. Check It From Your Phone: Works with the Go Power! Connect app for remote monitoring and control.
Filters
