Small, light, and precise, this portable unit gets you smooth braking with basically no installation. Plugs directly into 12V outlet. Easy to swap between multiple cars. Control and monitor the system remotely from your motorhome with LCD display.A braking system is a must when towing a vehicle behind your motorhome. Without it, the weight of the towed car can create a safety hazard, strain your RV's brakes, and affect the warranty of both your car and motorhome. Most states legally require a supplemental braking system, so if you don't use one and you end up in an accident (which is more likely since your RV takes longer to come to a full stop), your insurance and liability headache just doubled.
... This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The unit plugs into your 7-way for a one-step installation with no wiring.This brake controller is not compatible, but will not interfere, with Apple CarPlay or Android Auto. One-Step Installation The Curt Echo is unique for its plug-and-play installation. With no wiring or permanent installation, setting up the Echo is a breeze.
... Includes a ball with an easy-to-use handle and ball-bearing locking system, rubber ball hole cover, 2 safety-chain loops, and storage case.Features: Kit works with factory-installed gooseneck hitches on Ford, GM, Chevy, and Nissan Titan XD trucks Pop-in ball fits securely in gooseneck receiver and is easy to insert and remove Built-in-ball-bearing system holds ball in place in receiver Handle provides leverage for operation and a clean way to carry the ball Handle locks in horizontal position to prevent accidental unlatching 2 Safety-chain hookups attach directly to receivers built into gooseneck rails for simple mounting and removal Safety chain anchors accommodate commercially available safety chain hooks (sold separately) Internal and external components are plated or made from stainless steel for corrosion protection Rubber cover keeps dirt and debris out of ball hole when ball is removed Storage case keeps ball, safety chain loops, and rubber cover in good condition when not in use Made in the USA Specs: Gross towing weight: 30,000 lbs Capacity is limited to that of your hitch Ball size: 2-5/16" Limited lifetime warranty
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12" x 2" Assemblies have rust-resistant, e-coated backing plates to protect from debris. Fits 14.5" to 16.5" wheels.You won't have to do tedious manual adjustments anymore. Thoroughly Tested for Safety A lot of resources have been invested to ensure that these brakes meet the requirements for certification set by the QAI and CSA .
Sturdy RV steps adjust to rough terrain, eliminating the springboard effect and providing a wobble-free step into your camper. Easily detach for parking in a tight spot. ... Features: Entry steps make it easy to climb in and out of your travel trailer or 5th wheel Easily fold down for use and fold back up for travel Triple steps mount, stow, and lock into place behind the entry door Keeps the steps protected from the elements Detachable so you won't get locked out if you park in a tight storage lot where you can't fold the steps down Just remove pins from hinge plate to disconnect steps so you can access your door Stable design is bounce- and wobble-free Legs extend and individually adjust for maximum ground contact, even on uneven land Safety features provide traction and reduce the potential for slipping in wet conditions 10-5/8" Deep top step provides a bigger surface area for your foot when exiting the camper Textured step surface and non-slip tread tape help keep you from slipping Lightweight construction makes lifting and lowering the steps virtually effortless Aluminum step platforms are rustproof and scratch resistant Powder coated steel frame resists corrosion Pre-assembled steps come with mounting hardware to ease installation Made in the USA Specs: Application: travel trailers and 5th wheels Entry height (from ground to threshold): 30" - 33-1/2" Doorway width (from inside flange to inside flange): 23-3/4" - 26-1/4" Step dimensions: 19-1/2" wide x 8" deep Top step depth: 10-5/8" Mounting bracket dimensions: 22-1/4" wide x 3-3/4" tall x 10" deep Height (in travel position): 36-7/16" Drop/rise: 8" Leg extension length: 1" increments for a total of 13" Weight capacity: 500 lbs 1-Year limited warranty Why Fold-Down Steps are Right for You If you've ever stepped into a camper that has standard metal steps, you've probably felt that scary springboard effect that makes you reach for the handle.
... Includes a ball with an easy-to-use handle and ball-bearing locking system, rubber ball hole cover, 2 safety-chain loops, and storage case.Features: Kit works with factory-installed gooseneck hitches on Ram trucks Pop-in ball fits securely in gooseneck receiver and is easy to insert and remove Built-in-ball-bearing system holds ball in place in receiver Handle provides leverage for operation and a clean way to carry the ball Handle locks in horizontal position to prevent accidental unlatching 2 Safety-chain hookups attach directly to receivers built into gooseneck rails for simple mounting and removal Safety chain anchors accommodate commercially available safety chain hooks (sold separately) Internal and external components are plated or made from stainless steel for corrosion protection Rubber cover keeps dirt and debris out of ball hole when ball is removed Storage case keeps ball, safety chain loops, and rubber cover in good condition when not in use Made in the USA Specs: Gross towing weight: 30,000 lbs Capacity is limited to that of your hitch Ball size: 2-5/16" Limited lifetime warranty
... Includes a ball with an easy-to-use lever and ball-bearing locking system, rubber ball cover, 2 safety-chain loops, and storage case.Features: Kit works with factory-installed gooseneck hitches Pop-in ball fits securely in gooseneck receiver and is easy to insert and remove Lift integrated lever to unlock and remove ball Locks with built-in ball-bearing system Chrome-plated steel is durable and corrosion resistant 2 Safety-chain hookups attach directly to Power Pucks built into gooseneck rails for simple mounting and removal Rubber cover protects ball hole against dirt and debris when ball is removed Storage case keeps ball, safety chain loops, and rubber cover in good condition when not in use Specs: Gross towing weight: 38,000 lbs Capacity is limited to that of your hitch Ball size: 2-5/16" Limited lifetime warranty
... Includes a ball with an easy-to-use lever and ball-bearing locking system, rubber ball hole cover, 2 safety-chain loops, and storage case.Features: Kit works with factory-installed gooseneck hitches on Chevy, Ford, GMC, or Nissan trucks Pop-in ball fits securely in gooseneck receiver and is easy to insert and remove Built-in ball-bearing system holds ball in place in receiver Integrated lever releases ball for removal after just 1/4 turn Chrome-plated steel is durable and corrosion resistant 2 Safety-chain hookups attach directly to receivers built into gooseneck rails for simple mounting and removal Large loops make hookup easy, even with oversize clevis hooks Heavy-duty forged steel is strong and durable Black powder coat provides corrosion resistance Rubber cover keeps dirt and debris out of ball hole when ball is removed Storage case keeps ball, safety chain loops, and rubber cover in good condition when not in use Specs: Gross towing weight: 30,000 lbs Capacity is limited to that of your hitch Ball size: 2-5/16" Limited lifetime warranty
This aluminum tow bar is the absolutely snazziest tow bar you can get. Sleek, lightweight, with built-in LEDs for increased visibility and safe driving at night. The electrical cord comes installed in the cable guide, keeping your setup organized.To flat tow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flat tow braking system. For the RV Between the RV and Towed Car For the Towed Car Hitch Tow bar Base plate Wiring plug Safety cables Braking system Wiring adapter cord Wiring kit/diodes The custom-fit base plate installs on the frame of your toad so you can connect the car to your RV with a tow bar.
LED tester lets you easily check the battery's charge. Built-in charger pulls just enough power from your vehicle when your trailer is hooked up to make sure your breakaway battery stays charged and ready to go in case a disconnect ever occurs.
Imagine prepping for your trip and having your braking system ready in less than a minute. With the RVibrake 4, the audio assistant guides you step by step, so there's no fumbling or guesswork, just a quick and reliable setup every time.To flat tow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flat tow braking system. For the RV Between the RV and Towed Car For the Towed Car Hitch Tow bar Base plate Wiring plug Safety cables Braking system Wiring adapter cord Wiring kit/diodes The custom-fit base plate installs on the frame of your toad so you can connect the car to your RV with a tow bar.
... Includes a ball with an easy-to-use lever and ball-bearing locking system, rubber ball cover, 2 safety-chain loops, and storage case.Features: Kit works with factory-installed gooseneck hitches on Dodge Rams Pop-in ball fits securely in gooseneck receiver and is easy to insert and remove Lift integrated lever to unlock and remove ball Locks with built-in ball-bearing system Chrome-plated steel is durable and corrosion resistant 2 Safety-chain hookups attach directly to Power Pucks built into gooseneck rails for simple mounting and removal Rubber cover protects ball hole against dirt and debris when ball is removed Storage case keeps ball, safety chain loops, and rubber cover in good condition when not in use Specs: Gross towing weight: 30,000 lbs Capacity is limited to that of your hitch Ball size: 2-5/16" Dimensions of case: 15-3/4" long x 10-3/8" wide x 2-1/2" thick Limited lifetime warranty
Struggling with that first big step into your RV? This sturdy steel stool bridges the gap, making it safer and more comfortable for the whole family. And we like that the large, stable platform doesn't tip, even if you step on the edge.This makes up the anti-tip design which ensures that the step remains stable and won't wobble or tip, even if you stand on the very edge of the platform. Small and Lightweight While the SafetyStep is light enough that almost anybody can carry it, it is sturdy enough to support up to 500 lbs, making it perfect for nearly everyone and every job.
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 5 on 4-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.99" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product.
This step adjusts from 7" to 9" tall to give you the lift you need. Use it to get a better look under your hood, or to bridge the gap from your RV step to the ground. ... Its folding design ensures that it can be stowed away practically anywhere, making it simple to transport and easy to hide. A-10C-G SafetyStep Adjustable Height, Folding Platform RV Step - Aluminum - 19" x 15" - 1,000 lbs
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. It's so easy to adjust your settings or activate manual override.knob that blends into your dash - The main unit mounts out of sight behind the dashboard Simple controls - Use the knob to adjust the settings, activate manual override, and troubleshoot Safe - Meets or exceeds both UNECE R21 and FMVSS 201 regulations for sustainability and safety Plug-and-play - Vehicle-specific harness included Made in Australia - If it can take the Outback, it can take anything, mate Specs: Application: trailers with up to 2 axles (4 brake assemblies) Compatible with electric or electric-over-hydraulic trailer brakes Main unit dimensions: 4" long x 3-3/8" wide x 1-1/8" tall Control knob dimensions: 1-7/8" long x 9/16" wide x 3/4" tall Length without dial: 1-1/4" Output voltage range: 9V - 16V Output current rating: 18 amps continuous Maximum charging voltage: 12V DC 2-Year warranty Note: Pick up a universal mounting panel to give your installation a professional look!
This custom-fit trailer hitch with a hidden cross tube installs behind your vehicle's rear bumper, leaving only the receiver visible beneath it. Aluminum and steel alloy construction is durable and eco-friendly. Powder coat finish resists rust.Features: Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle Hidden cross tube provides a clean, from-the-factory look Easy, bolt-on installation - no drilling or welding required Hardware is included Sturdy, lightweight alloy construction Alloy is made of recycled materials and combines aluminum, steel, and stainless steel Black powder coat finish offers superior rust protection Meets SAE J684 towing safety regulations Made in the USA Specs: Receiver opening: 2" x 2" Rating: Class III Maximum gross trailer weight : 5,000 lbs Maximum tongue weight : 750 lbs Not rated for weight distribution systems Limited lifetime warranty Hidden Cross Tube for a Clean, Factory Look The EcoHitch Hidden trailer hitch is designed to be as inconspicuous as possible.
Plug-and-play: this permanent system gets you automatic braking with a one-and-done installation. Actuator box installs out of your way under the front seat. Adjustable pressure setting for comfortable braking. Charges car battery while towing.A braking system is a must when towing a vehicle behind your motorhome. Without it, the weight of the towed car can create a safety hazard, strain your RV's brakes, and affect its the warranty of both your car and motorhome. Most states legally require a supplemental braking system, so if you don't use one and you end up in an accident (which is more likely since your RV takes longer to come to a full stop), your insurance and liability headache just doubled.
Plug in and go: this permanent system gets you smooth, reliable braking with a one-and-done installation. Low-profile components designed to stay out of sight.Your car will brake evenly and naturally as it's being towed, so there's less risk of damage. Built-In Safety Features Included with the Duo is an LED indicator light for safety and peace of mind. This LED, mounted in the toad (on the dash or on the back of the rearview mirror) and visible in your RV's backup camera, will light up whenever your toad is actively braking.
Strut-assisted RV steps easily lift and lower with a finger, and the legs individually adjust to uneven ground to provide a wobble-free step into your camper. ... Features: Entry steps with strut assist make it easy to climb in and out of your travel trailer or 5th wheel Easily fold down for use and fold back up for travel Quad steps mount and stow into place behind the entry door Keeps steps protected from the elements Easy-to-lift design uses gas struts that do all the hard work for you Lift and lower with just one finger Struts fasten the steps in place in stowed position Stable design is bounce- and wobble-free Legs extend and individually adjust for maximum ground contact, even on uneven land Safety features provide traction and reduce the potential for slipping in wet conditions 10-5/8" Deep top step is a bigger surface area for your foot when exiting the camper Textured step surface and non-slip tread tape help keep you from slipping Aluminum steps and powder coated steel frame are rustproof and resist corrosion Pre-assembled steps come with mounting hardware Made in the USA Specs: Application: travel trailers and 5th wheels Entry height (from ground to threshold): 36-1/2" - 42-1/2" Doorway width (from inside flange to inside flange): 27-3/4" - 28-1/4" Step dimensions: 23-1/2" wide x 8" deep Top step depth: 10-5/8" Mounting bracket dimensions: 33-1/2" wide x 25-3/4" tall x 12-5/16" deep Height (in travel position): 47-3/4" tall Drop/rise: 8" Leg extension length: 1" increments for a total of 13" Weight capacity: 500 lbs 1-Year limited warranty Why Fold-Down Steps Are Right for You If you've ever stepped into a camper that has standard metal steps, you've probably felt that scary springboard effect that makes you reach for the handle.
Extra-large 8" tall, folding step will give you the lift you need to get to those hard-to-reach places in your garage or kitchen. The legs lock in place to ensure stability and can be folded in for compact storage.Its folding design ensures that it can be stowed away practically anywhere, making it simple to transport and easy to hide. XL-08C-G SafetyStep Folding Platform RV Step - Aluminum - 24" x 16" - 1,000 lbs - Granite
... The non-binding levers let you disconnect quickly at the campsite, even on rough terrain. Coiled safety cables included.For added protection from the elements, slip the Blue Ox tow bar cover (BX8875 - sold separately) over the Alpha when you're not using it. Vinyl-Coated Safety Cables Included Included with this tow bar are 2 coiled safety cables rated at 8,000 lbs. These cables, required by law, will keep your toad behind your RV if there's ever an accidental disconnect while towing.
Sturdy RV steps adjust to rough terrain, eliminating the springboard effect and providing a wobble-free step into your camper. Easily detach for parking in a tight spot. ... Features: Entry steps make it easy to climb in and out of your travel trailer or 5th wheel Easily fold down for use and fold back up for travel Double steps mount, stow, and lock into place behind the entry door Keeps the steps protected from the elements Detachable so you won't get locked out if you park in a tight storage lot where you can't fold the steps down Just remove pins from hinge plate to disconnect steps so you can access your door Stable design is bounce- and wobble-free Legs extend and individually adjust for maximum ground contact, even on uneven land Safety features provide traction and reduce the potential for slipping in wet conditions 10-5/8" Deep top step provides a bigger surface area for your foot when exiting the camper Textured step surface and non-slip tread tape help keep you from slipping Lightweight construction makes lifting and lowering the steps virtually effortless Aluminum step platforms are rustproof and scratch resistant Powder coated steel frame resists corrosion Pre-assembled steps come with mounting hardware to ease installation Made in the USA Specs: Application: travel trailers and 5th wheels Entry height (from ground to threshold): 25" - 29" Doorway width (from inside flange to inside flange): 23-3/4" - 26-1/4" Step dimensions: 19-1/2" wide x 8" deep Top step depth: 10-5/8" Mounting bracket dimensions: 22-1/4" wide x 3-3/4" tall x 10" deep Height (in travel position): 29-1/4" Drop/rise: 9" Leg extension length: 1" increments for a total of 13" Weight capacity: 500 lbs 1-Year limited warranty Why Fold-Down Steps are Right for You If you've ever stepped into a camper that has standard metal steps, you've probably felt that scary springboard effect that makes you reach for the handle.
Filters
