Replaces the Part B of Z Brackets and mounting feet for your Exposed Racks crossbar. Fits 1-1/4" to 2" thick rails. Requires Part A bracket (not included).Features: Replaces the Part B of Z Brackets and mounting feet for your Exposed Racks crossbar Requires Part A bracket (not included) Made in the USA Specs: Quantity: 2 brackets Application: 1-1/4" to 2" thick rails
Replaces the Part B of Z Brackets without mounting feet for your Exposed Racks crossbar. Fits 1-1/4" to 2" thick rails. Requires Part A bracket (not included).Features: Replaces the Part B of Z Brackets without mounting feet for your Exposed Racks crossbar Requires Part A bracket (not included) Made in the USA Specs: Quantity: 2 brackets Application: 1-1/4" to 2" thick rails
Replaces the Part A of High Rail Brackets for your Exposed Racks crossbar. Sits 3/8" above rails. Requires Part B bracket (not included).Features: Replaces the Part A of High Rail Brackets for your Exposed Racks crossbar Requires Part B bracket (not included) Made in the USA Specs: Quantity: 2 brackets Height above rails: 3/8"
Replaces the Part B of Z Brackets and mounting feet for your Exposed Racks crossbar. Fits 3/4" to 1-1/2" thick rails. Requires Part A bracket (not included).Features: Replaces the Part B of Z Brackets and mounting feet for your Exposed Racks crossbar Requires Part A bracket (not included) Made in the USA Specs: Quantity: 2 brackets Application: 3/4" to 1-1/2" thick rails
Replaces the Part B of Z Brackets without mounting feet for your Exposed Racks crossbar. Fits 3/4" to 1-1/2" thick rails. Requires Part A bracket (not included).Features: Replaces the Part B of Z Brackets without mounting feet for your Exposed Racks crossbar Requires Part A bracket (not included) Made in the USA Specs: Quantity: 2 brackets Application: 3/4" to 1-1/2" thick rails
Replaces the Part B of Z Brackets and mounting feet for your Exposed Racks crossbar. Fits 1-3/4" to 2-1/2" thick rails. Requires Part A bracket (not included).Features: Replaces the Part B of Z Brackets and mounting feet for your Exposed Racks crossbar Requires Part A bracket (not included) Made in the USA Specs: Quantity: 2 brackets Application: 1-3/4" to 2-1/2" thick rails
For your 2013 Dodge Grand Caravan with Stow-N-Go I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver part #75579 which is a confirmed fit that installs using pre drilled holes in the frame. This hitch has a class III rating with a 2"…
You are correct that disc brakes require an actuator with higher psi pressure than what is required by drum brakes. Drum brakes need pressure of 1000-psi but discs need 1500 to 1600-psi. You can convert your Titan Surge-O-Matic Model 6 actuator to…
The install for the two kits you mentioned part #AL60818HD and #AL60818 is the exact same. The only difference between the two kits is the capacity of the bags. The HD kit has a capacity of up to 2,100 lbs and the other up to 1,000 lbs. The install…
I forwarded this to our contact at Demco and what they responded with is below. The short answer is you should already have all of the parts you need: The baseplate for the 2018 Chevy Equinox ( #DM9519332) is the Demco tabless baseplate. The 2015…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
I've attached a diagram for you with function locations. Your left turn and stop are what will need to be connected for the flashers to work. These are found on the left and right side blades of your 7-way connectors. I recommend using a circuit…
Assuming you are in that 9-10" range you can use the Draw-Tite Ball Mount #80248. This has a 9-3/4" rise and a gross towing weight of 3,500 lbs which would be perfect for your trailer. You will also need #C40002 for a 1-7/8" ball or…
Yes, we do have trailer hitch options for a 2003 Ford E350 Short Bus. That said, these require drilling and or welding. There are no bolt-on options for this application. I recommend the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part…
The Curt hitch part #14055 will fit the cutaway models of the 2003 Ford E-350 if the bolt holes on the frame of the van are 38-1/4 inches apart on center. I attached an install video for you to check out as well.
The correct replacement upper strap for your Yakima KingJoe Pro 2, model 8002624, is part #Y37FR. Just in case, here's a list of other replacements parts compatible with your bike rack: Replacement Lower Side Strap #8880220 Replacement Strap…
The problem is either the power or the ground side of the wiring of the LED assemblies. First thing to do is check that 12 volts are making it to the trailer connector. You can use a circuit tester like our part #3808. Next, trace the wiring back to…
It looks like from the photos I was able to find, the 2003 Coachmen Clipper Sport 106 will take a standard A-frame trailer jack. For that reason you can use something like the Buyers Products A-Frame Jack w/ Support Foot - 15" Travel - 2,000 lbs…
Replaces the Part A of High Rail Brackets for your Exposed Racks crossbar. Sits 1" above rails. Requires Part B bracket (not included).Features: Replaces the Part A of High Rail Brackets for your Exposed Racks crossbar Requires Part B bracket (not included) Made in the USA Specs: Quantity: 2 brackets Height above rails: 1"
Replaces the Part B of Z Brackets without mounting feet for your Exposed Racks crossbar. Fits 1-3/4" to 2-1/2" thick rails. Requires Part A bracket (not included).Features: Replaces the Part B of Z Brackets without mounting feet for your Exposed Racks crossbar Requires Part A bracket (not included) Made in the USA Specs: Quantity: 2 brackets Application: 1-3/4" to 2-1/2" thick rails
Replaces the Part A of High Rail Brackets for your Exposed Racks crossbar. Sits 2" above rails. Requires Part B bracket (not included).Features: Replaces the Part A of High Rail Brackets for your Exposed Racks crossbar Requires Part B bracket (not included) Made in the USA Specs: Quantity: 2 brackets Height above rails: 2"
This platform rack has arms that deploy with the tap of a lever, making loading and unloading bikes almost effortless. Arms hold your bikes securely by the wheels. Bikes can be loaded onto the wheel trays front to back to prevent handlebar contact.Features: Platform bike rack carries 2 bikes using your vehicle's hitch receiver Ratcheting arms with hydro-pneumatic pistons deploy with the tap of a lever for easy bike loading U-shaped bridges with tire-size selector hold your bikes securely by the wheels Cradle-less wheel trays allow bikes to be rolled front to back to prevent handlebar contact Spring-loaded foot and hand pedal lets you tilt and fold the rack with ease Tilts with bikes loaded to access cargo area Easy installation with flatlock cam system and included tool Tightens rack inside your hitch to reduce movement and noise Keyed-alike locks deter theft of your bikes and the rack 1-Bike or 2-bike add-on (sold separately) lets you carry 3 or 4 bikes Telescoping aluminum ramp (sold separately) helps you load heavy e-bikes Strap kit (sold separately) lets you carry bikes with fenders Black powder coated aluminum rack and steel hitch are corrosion resistant Specs: Application: 2" x 2" trailer hitch receivers Carrying capacity: 2 bicycles Weight capacity: 67 lbs per bike When used on an RV: 42 lbs Wheel size: 18" - 29" Maximum tire width: 5" Maximum bike wheelbase: 53" Distance from center of hitch pin hole to: Closest part of rack when folded down: 10-1/8" Closest part of rack when folded up: 6-3/8" Farthest part of rack when folded down: 29-3/8" Farthest part of rack when folded up: 15" Carrier weight: 60 lbs Limited lifetime warranty Pivoting Arms with Hydro-Pneumatic Struts and Adjustable Bridges The Piston Pro has arms with hydro-pneumatic struts that deploy automatically by simply tapping the release levers, so you can easily load your bikes with both hands.
This platform rack has arms that deploy with the tap of a lever, making loading and unloading bikes almost effortless. Arms hold your bikes securely by the wheels. Bikes can be loaded onto the wheel trays front to back to prevent handlebar contact.Features: Platform bike rack carries 2 bikes using your vehicle's hitch receiver Ratcheting arms with hydro-pneumatic pistons deploy with the tap of a lever for easy bike loading U-shaped bridges with tire-size selector hold your bikes securely by the wheels Cradle-less wheel trays allow bikes to be rolled front to back to prevent handlebar contact Spring-loaded foot and hand pedal lets you tilt and fold the rack with ease Tilts with bikes loaded to access cargo area Easy installation with flatlock cam system and included tool Tightens rack inside your hitch to reduce movement and noise Keyed-alike locks deter theft of your bikes and the rack Telescoping aluminum ramp (sold separately) helps you load heavy e-bikes Strap kit (sold separately) lets you carry bikes with fenders Black powder coated aluminum rack and steel hitch are corrosion resistant Specs: Application: 1-1/4" x 1-1/4" trailer hitch receivers Carrying capacity: 2 bicycles Weight capacity: 60 lbs per bike Wheel size: 18" - 29" Maximum tire width: 5" Maximum bike wheelbase: 53" Distance from center of hitch pin hole to: Closest part of rack when folded down: 11" Closest part of rack when folded up: 6" Farthest part of rack when folded down: 28" Farthest part of rack when folded up: 15" Carrier weight: 60 lbs Limited lifetime warranty Pivoting Arms with Hydro-Pneumatic Struts and Adjustable Bridges The Piston Pro has arms with hydro-pneumatic struts that deploy automatically by simply tapping the release levers, so you can easily load your bikes with both hands.
Premium rack has arms that deploy with the tap of a lever, making loading and unloading bikes almost effortless. Arms hold your bikes securely by the wheels. Built-in LEDs use your vehicle's 4-way plug to sync with your brake lights.Features: Platform bike rack carries 2 bikes using your vehicle's hitch receiver Ratcheting arms with hydro-pneumatic pistons deploy with the tap of a lever for easy bike loading U-shaped bridges with tire-size selector hold your bikes securely by the wheels Cradle-less wheel trays allow bikes to be rolled front to back to prevent handlebar contact Integrated LED brake lights and turn signals increase safety and visibility 4-Way flat trailer plug connects to your vehicle's 4-way connector Spring-loaded foot and hand pedal lets you tilt and fold the rack with ease Tilts with bikes loaded to access cargo area Easy installation with flatlock cam system Tightens rack inside your hitch to reduce movement and noise Keyed-alike locks deter theft of your bikes and the rack Telescoping aluminum ramp (sold separately) helps you load heavy e-bikes Strap kit (sold separately) lets you carry bikes with fenders Gray powder coated aluminum rack and steel hitch are corrosion resistant Specs: Application: 1-1/4" x 1-1/4" trailer hitch receivers Carrying capacity: 2 bicycles Weight capacity: 60 lbs per bike Wheel size: 18" - 29" Maximum tire width: 5" Maximum bike wheelbase: 53" Distance from center of hitch pin hole to: Closest part of rack when unfolded: 11" Closest part of rack when folded: 6" Farthest part of rack when unfolded: 28"" Farthest part of rack when folded: 15" Carrier weight: 60 lbs Limited lifetime warranty Pivoting Arms with Hydro-Pneumatic Struts and Adjustable Bridges The Piston Pro X has arms with hydro-pneumatic struts that deploy automatically by simply tapping the release levers, so you can easily load your bikes with both hands.
Every ride starts with the puzzle phase of fitting bikes on the rack. Most racks force a specific order, especially with non-standard bike frames, but the Shifts&Grins adjusts to your setup so you spend less time swapping spots and more time riding.Specs Vehicle & RV Compatibility: Application: 2" Trailer hitch receivers Capacity: Bikes: 2 Weight: 55 lbs per bike Maximum tire width: 4.0" Maximum wheelbase: 48" Maximum wheel diameter: 29" Dimensions: Rack when folded up: 24" long x 55-1/2" wide x 25" tall Distance between bikes: 11" Wheel strap length: 18" Distance from center of hitch pin hole to: Closest part of rack when folded down: 14-1/2" Closest part of rack when folded up: 11" Farthest part of rack when folded down: 36" Farthest part of rack when folded up: 22" Weight: Carrier weight: 63.5 lbs Color & Construction: Dark gray, powder coated steel Warranty: Limited lifetime
Loading 4 bikes shouldn't be a puzzle. Most racks force a specific order, but the Shifts&Grins lets you load your way. Plans change? Drop to 2 bikes in seconds - just loosen the knob and slide off the add-on. No tools, no hassle, just ride.Specs Vehicle & RV Compatibility: Application: 2" Trailer hitch receivers Capacity: Bikes: 4 Weight: 55 lbs per bike Maximum weight capacity is 220 lbs or hitch capacity, whichever is less Maximum tire width: 4.0" Maximum wheelbase: 48" Maximum wheel diameter: 29" Dimensions: Rack when folded up: 24" long x 55-1/2" wide x 48" tall Distance between bikes: 11" Wheel strap length: 18" Distance from center of hitch pin hole to: Closest part of rack when folded down: 14-1/2" Closest part of rack when folded up: 11" Farthest part of rack when folded down: 36" Farthest part of rack when folded up: 21" Weight: Carrier weight: 114 lbs Color & Construction: Dark gray, powder coated steel Warranty: Limited lifetime
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 4,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... Features: Leaf spring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushings included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hanger mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Specs: Quantity: 1 leaf spring Spring capacity: 2,000 lbs Axle capacity: 4,000 lbs Length from center of spring eye to center of spring eye (unloaded): 26" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 3/8" Number of leaves: 4 Additional dimensions: see table Part Number A B C D e22YR 13" 14" 26" 4-1/4" Double-Eye Leaf Spring Basics Leaf springs, as you probably know, make up an important part of your trailer's suspension.
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 5,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... Features: Leaf spring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushings included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hanger mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Specs: Quantity: 1 leaf spring Spring capacity: 2,500 lbs Axle capacity: 5,000 lbs Length from center of spring eye to center of spring eye (unloaded): 25-1/4" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 3/8" Number of leaves: 4 Additional dimensions: see table Part Number A B C D e44SR 12-5/8" 13-1/4" 25-1/4" 3" Double-Eye Leaf Spring Basics Leaf springs, as you probably know, make up an important part of your trailer's suspension.
Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 7,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... Leaf springs are an integral part of your trailer suspension system. The leaf springs provide the attachment points for your trailer's axle, suspending it from the frame of your trailer.
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 6,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... Features: Leaf spring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushings included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hanger mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Specs: Quantity: 1 leaf spring Spring capacity: 3,000 lbs Axle capacity: 6,000 lbs Length from center of spring eye to center of spring eye (unloaded): 25-1/4" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 3/8" Number of leaves: 5 Additional dimensions: see table Part Number A B C D e34SR 12-3/4" 13-1/3" 25-1/4" 3-1/8" Double-Eye Leaf Spring Basics Leaf springs, as you probably know, make up an important part of your trailer's suspension.
Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for an 8,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... Leaf springs are an integral part of your trailer suspension system. The leaf springs provide the attachment points for your trailer's axle, suspending it from the frame of your trailer.
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 6,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... Features: Leaf spring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushings included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hanger mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Specs: Quantity: 1 leaf spring Spring capacity: 3,000 lbs Axle capacity: 6,000 lbs Length from center of spring eye to center of spring eye (unloaded): 26" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 3/8" Number of leaves: 6 Additional dimensions: see table Part Number A B C D e94SR 13" 14" 26" 4-1/4" Double-Eye Leaf Spring Basics Leaf springs, as you probably know, make up an important part of your trailer's suspension.
Every ride starts with the puzzle phase of fitting bikes on the rack. Most racks force a specific order, especially with non-standard bike frames, but the Shifts&Grins adjusts to your setup so you spend less time swapping spots and more time riding.Specs Vehicle & RV Compatibility: Application: 2" Trailer hitch receivers Capacity: Bikes: 2 Weight: 55 lbs per bike Maximum tire width: 4.0" Maximum wheelbase: 48" Maximum wheel diameter: 29" Dimensions: Rack when folded up: 24" long x 55-1/2" wide x 25" tall Distance between bikes: 11" Wheel strap length: 18" Distance from center of hitch pin hole to: Closest part of rack when folded down: 14-1/2" Closest part of rack when folded up: 11" Farthest part of rack when folded down: 36" Farthest part of rack when folded up: 22" Weight: Carrier weight: 63.5 lbs Color & Construction: Dark gray, powder coated steel Warranty: Limited lifetime
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 7,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... Double-Eye Leaf Spring Basics Leaf springs, as you probably know, make up an important part of your trailer's suspension. Their main purpose is to absorb road shock as you travel, as well as allow your axle(s) to move independently of the rest of the trailer.
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 3,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... Features: Leaf spring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows for a smooth ride Reduces wear and tear on trailer Ensures level ride on bumpy and uneven surfaces Sturdy steel construction Nylon bushings included Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation Spring attaches to hanger mounted on trailer frame at one end Other end connects to shackle straps suspended from hanger or equalizer Specs: Quantity: 1 leaf spring Spring capacity: 1,750 lbs Axle capacity: 3,500 lbs Length from center of spring eye to center of spring eye (unloaded): 27" Spring width: 1-3/4" Eye diameter with bushing: 9/16" Eye diameter without bushing: 11/16" Leaf thickness: 3/8" Number of leaves: 4 Additional dimensions: see table Part Number A B C D e97SR 13-1/2" 14" 27" 2-3/4" Double-Eye Leaf Spring Basics Leaf springs, as you probably know, make up an important part of your trailer's suspension.
Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 6,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. ... Leaf springs are an integral part of your trailer suspension system. The leaf springs provide the attachment points for your trailer's axle, suspending it from the frame of your trailer.
Filters
