Replaces the OneControl Advantage controller for your Lippert Level Up RV leveling system. Fits all Lippert Level Up leveling systems. Includes flat mounting brackets and hardware.Features: Replaces the OneControl Advantage controller for your Lippert Level Up RV leveling system Fits all Lippert Level Up leveling systems Flat mounting brackets and hardware not included Specs: Dimensions: 5-1/2" Long x 1-5/16" wide x 3-5/6" tall 1-Year warranty Fits: All Lippert Level Up leveling systems
Replaces the OneControl Advantage controller with Bluetooth for your Lippert Level Up RV leveling system. Fits all Lippert Level Up leveling systems. Includes flat mounting brackets and hardware.Features: Replaces the OneControl Advantage controller for your Lippert Level Up RV leveling system Fits all Lippert Level Up leveling systems Connects to your phone with Bluetooth capabilities Flat mounting brackets and hardware not included Specs: Dimensions: 5-1/2" Long x 1-5/16" wide x 3-5/6" tall 1-Year warranty Fits: All Lippert Level Up leveling systems
Replaces the 20' data cable for your Lippert Ground Control 3.0, Ground Control TT, or OneControl electric leveling system.Features: Replaces the CAN bus data cable for your Lippert Ground Control or OneControl electric leveling system Fits Lippert Ground Control 3.0 (LC358590 and LC675817), Ground Control TT (LC672136), or OneControl electric leveling system Includes (1) 20' cable Fits: Lippert Ground Control 3.0: LC358590 and LC675817 Lippert Ground Control TT for travel trailers: LC672136 All Lippert OneControl systems
Replaces the control board for your Lippert OneControl electric Travel Trailer RV leveling system (672136).Features: Replaces the control board for your Lippert OneControl electric Travel Trailer RV leveling system (672136) Fits: Lippert OneControl electric Travel Trailer RV leveling system: 672136
Replaces the leveler control assembly for your Lippert OneControl RV-C RV leveling system.Features: Replaces the leveler control assembly for your Lippert OneControl RV-C RV leveling system Fits: Lippert OneControl RV-C RV leveling systems
Complete your Insight observation system with this 7" LCD display with suction cup mount. Turn it on to automatically pair with your existing OneControl Insight backup camera. Built-in speaker lets you hear commands from the rear of your RV.Features: LCD display screen pairs with your existing OneControl Insight camera to show what is behind your RV while backing up or travelling down the road 7" Touchscreen has anti-glare and anti-scratch coating Configurable rear-assist marker lines show real-time distance from objects Crisp color image can help you avoid hazards Automatically pairs with your Insight observation camera via bluetooth when you turn it on Speaker projects audio sent from camera Suction cup mount can be applied to dash or windshield Allows for easy storage when not in use Includes USB-B power cord Specs: Screen size: 7" Wireless range: Monitor: 900' Camera: 100' Operating temperature range: -4 F to 156 F Storage temperature range: -22 F to 176 F 1-Year limited warranty
One touch brings your RV's controls together. The color touchscreen auto-dims as daylight changes, so checks are easy at noon or midnight. ... Highlights One Screen For Your System: Check battery percent, solar watts, and inverter status at a glance. Auto Dimming: Built-in light sensor adjusts brightness for day and night.
Replaces the control module for Lippert Components Ground Control 3.0 automatic leveling system (LC358590). Mounts in a compartment under the coach.Features: Replaces the control module for Lippert Components Ground Control 3.0 electric leveling system (LC358590) Mounts in a compartment under the coach Connects directly to your 12-volt battery with wiring harness Other wiring harnesses connect the jack motors, rear sensor, and the touchpad to the control module
7-3/4" x 3-1/8" Rectangle. Waterproof trailer tail light serves 6 functions: brake, tail, turn, reflex, side marker, and license plate light. Durable polycarbonate lens and housing. Surface mount to trailer. 3-Prong molded plug.Features: LED trailer tail light serves 6 functions Stop, tail, turn, reflector, and side marker License plate light illuminates your trailers license plate for easy identification ONE Series provides bright light using fewer diodes than other LED lights Sonically sealed, waterproof housing and lens unit is submersible Built-in reflex reflector removes the need for a separate reflector LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red screw-on lens over white LED Surface mount on trailer - hardware included Molded 3-prong plug provides a watertight connection DOT compliant Specs: Configuration: driver side Passenger side: STL0066RBG (sold separately) Dimensions: 7-3/4" long x 3-1/8" tall x 2-7/8" deep Total diodes: 6 Tail: 1 Turn signal: 2 License light: 3 Power draw at 12.8V: Stop: 0.154 amps Tail/turn: 0.060 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
7-3/4" x 3-1/8" Rectangle. Waterproof trailer tail light serves 5 functions: brake, tail, turn, rear reflex, and side marker. Durable polycarbonate lens and housing. Surface mount to trailer. 3-Prong molded plugFeatures: LED trailer combination tail light serves 5 functions Stop, tail, turn, reflector, and side marker ONE Series provides bright light using fewer diodes than other LED lights Sonically sealed, waterproof housing and lens unit is submersible Built-in rear reflex reflector removes the need for a separate reflector LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red screw-on lens over white LED Surface mount on trailer - hardware included Molded 3-prong plug provides a watertight connection DOT compliant Specs: Configuration: passenger side Driver side: STL0067RPG (sold separately) Dimensions: 7-3/4" long x 3-1/8" tall x 2-7/8" deep Total diodes: 3 Tail: 1 Turn signal: 2 Power draw at 12.8V: Stop: 0.154 amps Tail/turn: 0.060 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
... Waterproof trailer light acts as brake, tail, turn, side marker, side reflex reflector, rear reflex reflector, and license plate light. ONE Series provides bright light using fewer diodes than other LEDs. Stud mount.Features: Square trailer tail light serves 7 functions Stop light Tail light Turn signal light Side marker light Side reflex reflector Rear reflex reflector License plate light Sealed, waterproof construction is submersible ONE Series provides bright light using fewer diodes than other LED lights Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Molded plastic housing Red and clear acrylic lenses Mounts on surface of trailer with included studs 3-Wire pigtail DOT compliant Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting Specs: Configuration: driver's side (left-hand side) Dimensions: 5-1/16" long x 4-9/16" tall x 2-7/8" deep Mounting holes: 2" apart on center Power draw at 12.8 volts: Stop light: 0.345 amps Tail light: 0.069 amps Warranty: Lifetime on LEDs 3-Year limited on housing, lens, and wiring Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
... Waterproof trailer light acts as brake, tail, turn, side marker, side reflex reflector, and rear reflex reflector. ONE Series provides bright light using fewer diodes than other LEDs. Stud mount.Features: Square trailer tail light serves 6 functions Stop light Tail light Turn signal light Side marker light Side reflex reflector Rear reflex reflector Sealed, waterproof construction is submersible ONE Series provides bright light using fewer diodes than other LED lights Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Molded plastic housing Red acrylic lenses Mounts on surface of trailer with included studs 3-Wire pigtail DOT compliant Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting Specs: Configuration: passenger's side (right-hand side) Dimensions: 5-1/16" long x 4-9/16" tall x 2-7/8" deep Mounting holes: 2" apart on center Power draw at 12.8 volts: Stop light: 0.345 amps Tail light: 0.069 amps Warranty: Lifetime on LEDs 3-Year limited on housing, lens, and wiring Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
8-5/8" LED light displays brake, tail, and turn signals on the passenger side of your RV. It mounts to the surface of the motorhome and has a replaceable lens. It wires to your RV with the included pigtail harness.Features: Rectangular RV brake, turn, and tail light Glows for tail light Brightens for brake light Flashes for turn signal LED with red lens More efficient and durable than incandescent bulb ABS plastic base and replaceable acrylic lens Surface mount with bracket (sold separately) Hardware not included 3-Wire pigtail White wire for ground Black wire for tail light Green wire for stop/turn signal light DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Configuration: passenger's side (right-hand side) Driver's-side light: RVSTLB0061 (sold separately) Light dimensions: 8-5/8" long x 3-3/16" tall x 2-1/4" thick Compatible with 12V DC systems Diodes: 1 Power draw at 12.8 volts: Stop/turn signal light: 0.32 amps Tail light: 0.01 amps Lifetime warranty on LEDs
... Waterproof trailer light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, rear reflex reflector. ONE Series provides bright light using fewer diodes than other LEDs. Stud mount.Features: Low-profile trailer tail light serves 7 functions Stop light, tail light, turn signal light, side marker light, side reflex reflector, rear clearance light, and rear reflex reflector ONE Series provides bright light using fewer diodes than other LED lights Sealed, waterproof construction is submersible Light is designed specifically for boat trailers Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable molded plastic housing Red acrylic lens Mounts on surface of trailer with included studs 3-Wire pigtail DOT compliant Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting Specs: Configuration: passenger's side (right-hand side) Driver's-side light (STL0017RB) sold separately Dimensions: 8-5/8" long x 2-7/8" tall x 2-13/16" deep Distance between mounting studs (center on center): 2" Diodes: 1 Power draw at 12.8 volts: Stop/turn signal light: 0.36 amps Tail light: 0.014 amps Quantity: 1 Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
... RV light serves 4 functions: brake, tail, turn, and license plate light. ONE Series provides bright light using fewer diodes than other LEDs. Surface mount with built-in license plate bracket. 3-Wire pigtail.Features: Rectangular RV tail light serves 4 functions Stop light, tail light, turn signal light, and license plate light Built-in license plate bracket allows easy mounting of license plate ONE Series provides bright light using fewer diodes than other LED lights Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable white ABS plastic base Red acrylic lens can be easily replaced Clear lens for license plate light Mounts on surface of trailer - hardware not included 3-Wire pigtail White wire for ground Black wire for tail light Green wire for stop/turn signal light DOT compliant Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting Specs: Configuration: driver's side (left-hand side) Passenger's-side light (RVSTL0060) sold separately Light dimensions: 8-5/8" long x 3-3/16" tall x 2-1/4" deep Height with license plate bracket: 5" Power draw at 12.8 volts: Stop/turn signal light: 0.34 amps Tail light: 0.094 amps Quantity: 1 Lifetime warranty on LEDs
8-5/8" RV light displays brake, tail, and turn signals on the passenger side. It mounts to the surface of the motorhome and wires to the RV.Features: Rectangular RV brake, turn, and tail light White LED with red lens More efficient and durable than incandescent bulbs White ABS plastic base and acrylic lens Surface mount Hardware not included 3-Wire pigtail White wire for ground Black wire for tail light Green wire for stop/turn signal light DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Configuration: passenger's side (right-hand side) Driver's-side light: RVSTL0061 (sold separately) Light dimensions: 8-5/8" long x 3-3/16" tall x 2-1/4" thick Power draw at 12.8 volts: Stop/turn signal light: 0.32 amps Tail light: 0.01 amps Lifetime warranty on LEDs
... Waterproof trailer light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, rear reflex reflector, license plate. ONE Series provides bright light using fewer diodes than other LEDs. Stud mount.Features: Low-profile trailer tail light serves 8 functions Stop light, tail light, turn signal light, side marker light, side reflex reflector, rear clearance light, rear reflex reflector, and license plate light ONE Series provides bright light using fewer diodes than other LED lights Sealed, waterproof construction is submersible Light is designed specifically for boat trailers Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable molded plastic housing Red and clear acrylic lenses Mounts on surface of trailer with included studs 3-Wire pigtail DOT compliant Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting Specs: Configuration: driver's side (left-hand side) Passenger's-side light (STL0016RB) sold separately Dimensions: 8-5/8" long x 2-7/8" tall x 2-13/16" deep Distance between mounting studs (center on center): 2" Diodes: 1 Power draw at 12.8 volts: Stop/turn signal light: 0.36 amps Tail light: 0.014 amps Quantity: 1 Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
4" Waterproof light displays brake, tail, and turn signals on your trailer. It mounts in a cutout with a grommet (sold separately) and works with 3-prong plugs.Pick up the right-angle pigtail (A47PB - sold separately) or the straight pigtail (A45PB - sold separately) if you don't have one already. How to Mount Trailer Light This light installs in a grommet (A45GB - sold separately) and requires cutting a hole into your trailer if it doesn't have one already.
4-1/4" Waterproof light displays brake, tail, and turn signals on your trailer. It mounts in a cutout with the built-in flange and works with 3-prong plugs.Pick up the right-angle pigtail (A47PB - sold separately) or the straight pigtail (A45PB - sold separately) if you don't have one already.
4" Waterproof light displays brake, tail, and turn signals on your trailer. It mounts in a cutout with a grommet (sold separately) and has a weathertight connector.Pick up a right-angle pigtail (A47PB - sold separately) or a straight pigtail (A45PB - sold separately) if you don't have one already. How to Mount Trailer Light This light installs in a grommet (A45GB - sold separately) and requires cutting a hole into your trailer if it doesn't have one already.
Filters
