If you off-road but space is at a premium, the Tallboy is a compact bottle jack that can still create some serious lift. The oversized base plate gives you a solid foundation on the trail. And it only takes up about one cubic foot when stored.It adjusts from 10-13/16" to 28-3/4" and supports up to 6 tons, letting you secure the raised load and free up your Tallboy jack for the next lifting position. Keep All the Pieces Together When the job's done, all the parts pack into the carry bag.
Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The unit plugs into your 7-way for a one-step installation with no wiring.If your vehicle takes too long to come to a stop, increase the setting. If it stops too abruptly, lower the setting. You may also need to adjust the sensitivity based on your own preferences, or when the trailer load or road conditions change. 5.
We've dealt with the rattles, the clanks, and the frustration of constant swaps, so we built a smarter solution. This anti-rattle collar installs fast, stays secure, and works with all your hitch-mounted gear, so you can focus on the road ahead.Highlights Eliminates Hitch Rattle: Tightens against your accessory to stop clunking and unwanted movement. Fits Most 2" Hitch Receivers: Works with standard 2" hitches for towing, hauling, or mounting gear.
LED tester lets you easily check the battery's charge. Built-in charger pulls just enough power from your vehicle when your trailer is hooked up to make sure your breakaway battery stays charged and ready to go in case a disconnect ever occurs.Features: Makes sure your trailer safely stops if it ever separates from your vehicle Activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Automatically charges battery with the built-in charger when connected to your vehicle Won't overcharge your battery Lets you test battery status with the push of a button Mounts on the outside of your trailer's frame Side-loading case allows easy access to the battery Switch installs on your trailer's frame with self-tapping screws (sold separately) Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Wiring diagram is printed on the battery box lid Rubber O-ring in the lid helps keep water out of the box Drain holes in the bottom of the box help with venting and letting condensation drain Kit includes breakaway switch, charger, 5-amp-hour battery, battery box, wiring, and wire loom Specs: Application: single-axle or tandem-axle trailers with electric braking systems Breakaway cable length: 4' Charger amperage: 1 amp Battery: Voltage: 12V Type: Lead-acid Capacity: 5 amp-hours Battery box dimensions: 3-3/4" long x 6" wide x 5" tall 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
Small, light, and precise, this portable unit gets you smooth braking with basically no installation. Plugs directly into 12V outlet. Easy to swap between multiple cars. Control and monitor the system remotely from your motorhome with LCD display.Even if, for any reason, the car's battery is dead and no longer sending power to the Patriot, it will trigger and bring the car to a stop.
7-9/16" x 3-5/16" Oval. Waterproof LED trailer tail lights function as stop, turn, and tail signal lights when properly mounted. Durable polycarbonate housing and lens. Reccessed mount with grommet. Accepts included standard 3-prong plugs.Features: Oval LED trailer tail lights serves 3 functions when properly mounted Brake light Tail Light Turn Signal Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Red lens over white LEDs Polycarbonate lens and housing Recessed mount with included grommets Includes industry-standard 3-prong plugs for connections Specs: Quantity: 2 trailer tail lights Overall dimensions: 7-9/16" long x 3-5/16" tall x 1-3/4" thick Light face: 6-1/2" long x 2-5/16" tall Diodes: 12 6 LEDs per light Powerdraw at 12.8V: Stop/turn: 0.161 amps Tail: 0.007 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12" x 2" Assemblies have rust-resistant, e-coated backing plates to protect from debris. Fits 14.5" to 16.5" wheels.Note: The brakes will be very hot after doing this, so after every 10 stops you'll want to wait about 10 minutes to let the brakes cool off before continuing. If you don't, you might cook and crack the pad material.
Carry ladders, lumber, and more with this aerodynamic truck bed ladder rack. Sliding loadstops make securing loads fast and easy. Rustproof aluminum construction. Simple, clamp-on installation. Fits most pickup trucks.Center the bars over your truck bed, then secure them in place with hand knobs. Sliding LoadStops The loadstops are easily adjustable along the crossbars. Just loosen the knobs under the crossbar, slide the loadstops to the desired position, and tighten them.
This heavy-duty tow bar is easy to maneuver, with a swivel head joint that lets the arms twist left and right. Non-binding levers let you disconnect at the campsite, even on rough terrain. Extra-long arms help you make tight turns.The steel hooks on each end of the cables connect to the toad's base plate and the RV's trailer hitch. The spring-loaded latches ensure that the hooks stay connected. What You Need to Flat Tow Flat towing can be a much more convenient way to take your car RVing with you than using a trailer or a tow dolly.
Stylish, versatile ladder rack for your vehicle lets you haul ladders and lumber during the week and your kayak or canoe on the weekend. Adjustable loadstops help hold gear in place. Easy, clamp-on installation. Rustproof aluminum construction.Simply position the upright bases at the desired position along your bed rails, and use the J-bolts, washers, and nuts to clamp them in place. Each base is secured to the bed rails with 2 J-bolts. Sliding LoadStops The rack includes 4 loadstops that can be easily adjusted along the length of the crossbars. Simply loosen the knob on the underside of the loadstop, slide it to the desired position, and tighten it in place.
Carry ladders, lumber, and more with this aerodynamic truck bed ladder rack. Sliding loadstops make securing loads fast and easy. T-slots in crossbars and uprights lets you outfit your truck for work or play. Rustproof aluminum construction.Features: Heavy-duty truck bed rack lets you carry ladders, lumber, and more with ease Aerodynamic crossbars reduce drag and wind noise Sliding loadstops help to keep cargo in place Just loosen hand knobs, slide loadstops to desired position, and retighten knobs T-slots on crossbars and uprights accept a wide variety of accessories Easy installation with clamps - no drilling required Universal system fits most truck beds Rustproof aluminum construction Compatible with most bed liners Specs: Weight capacity: 800 lbs Crossbar dimensions: 72" long x 3-1/2" wide x 1-1/2" tall Upright support height: 29" Upright support base width: 3" Maximum distance between loadstops: 61" - 62" Limited lifetime warranty
... The built-in charger keeps the battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a complete stop. LED tester lets you check the charge.Features: Makes sure your trailer safely stops if it separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Lead-acid battery works great in high temperatures Automatically charges battery with the built-in charger when connected to your vehicle Won't overcharge the battery Lets you test battery status with the push of a button Mounts on the outside of your trailer's frame Side-loading case provides easy access to the battery Switch installs on your trailer's frame with included self-tapping screws Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Includes breakaway switch, charger, Lead-acid battery, battery box, wiring, and mounting hardware Department of Transportation (DOT) compliant Specs: Application: single-, tandem-, and triple-axle trailers with electric brakes Battery capacity: Voltage:12V Type: sealed lead-acid Capacity: 5 amp-hours Breakaway cable length: 51" Breakaway switch: Dimensions: 4-3/8" long x 1-1/2" wide Lead wire length: 24" Charger lead wire length: 12" Battery box dimensions: 6" long x 3-3/4" wide x 5" tall Battery case mounting holes: From center to center vertically: 3-1/4" From center to center horizontally: 5-1/2" 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
8,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.Features: Improves suspension, handling, and safety Provides additional support as needed so you always have a smooth, comfortable ride when towing or hauling gear Allows the leaf spring ample movement while cushioning light loads Becomes more rigid as more weight is added for a great performance when you're hauling a heavy load Increases stability Reduces vehicle sag Works independently - side-to-side adjustment Helps compensate for off-center loads Reduces body roll when swerving and turning corners Acts as a shock absorber, taking the brunt of bumps and rough roads Extends the life of your vehicle's suspension Includes 2 Aeon hollow rubber springs, custom-fit brackets, and hardware for simple installation Installs directly onto frame No drilling required Specs: Load-leveling capacity: 8,600 lbs Timbren springs will not increase your vehicle's weight-carrying capacity.
This hitch-mounted cargo carrier tilts away from your vehicle - with gear loaded - for easy cargo area access, and it folds up for storage when not in use. The spacious basket has side rails that help contain your cargo and provide tie-down points.Tilting and Folding Design The carrier tilts down - even when it's loaded with gear - so you can easily access your vehicle's rear cargo area. Before you tilt the carrier make sure your cargo is strapped down and secure.
... Becomes more rigid as more weight is added for great performance when you're hauling a heavy load.Features: Improves suspension, handling, and safety Becomes more rigid as more weight is added for great performance when you're hauling a heavy load Increases stability Reduces vehicle sag Works independently - side-to-side adjustment Helps compensate for off-center loads Reduces body roll when swerving and turning corners Acts as shock absorber, taking the brunt of bumps and rough roads Extends the life of your vehicle's suspension Includes 2 Aeon hollow rubber springs, custom-fit brackets, and hardware for a simple installation Installs directly onto frame No drilling required Specs: Load-leveling capacity: 8,600 lbs Timbren springs will not increase your vehicle's weight-carrying capacity.
Your coach is hooked up or the trailer's loaded, but the lights aren't working and there is no time to fix wiring. This wireless, battery-powered kit mounts with magnets and gives you stop, turn, and tail lights without a permanent install.Bright LEDs: Sealed LED lamps shine clearly and resist water and dust. Specs Functions: Stop, turn, and tail lights Operation: Transmitter plugs into vehicles 4-way to send signals wirelessly Lamps mount with magnetic bases Materials: Polycarbonate lens and housing Electrical: Voltage: 12.8 VDC Current draw: 0.360 A stop/turn, 0.030 A tail Weight: 3-1/2 lbs Lamp Housing Dimensions: 3-7/8" x 2-3/16" x 6" Light Dimensions: 7-1/2" Long x 4-1/2" tall x 2-3/4" deep Mounting: Magnetic base Wiring Colors: White: ground Brown: tail Yellow: driver stop/turn Green: passenger stop/turn
These loadstops attach to your Yakima crossbars with T-slots to help secure heavy loads. Integrated tie-down points make it easy to secure lumber, ladders, canoes, and other gear. ... Features: Loadstops attach to your Yakima crossbars with T-slots to help secure heavy loads Work with Yakima HD Bar, JetStream, FlushBar, and RailBar crossbars Built-in tie-down points make it easy to secure lumber, ladders, canoes, and other gear Simple tool-free installation with included T-slot hardware Position can be easily adjusted by turning the integrated hand knob Durable steel construction with powder coat to resist rust and corrosion Specs: Quantity: 4 loadstops Weight capacity: With Yakima HD crossbars: 250 lbs With Yakima JetStream, FlushBar, or RailBar crossbars: 165 lbs Dimensions: 6-1/2" tall x 4-1/2" long x 1-1/2" wide Limited lifetime warranty
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.The CSA creates standards, which when complied with ensure a safe and quality product. This assembly underwent extensive testing to measure stopping distances when braking. This assembly has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.
Plug-and-play: this permanent system gets you automatic braking with a one-and-done installation. Actuator box installs out of your way under the front seat. Adjustable pressure setting for comfortable braking. Charges car battery while towing.Most states legally require a supplemental braking system, so if you don't use one and you end up in an accident (which is more likely since your RV takes longer to come to a full stop), your insurance and liability headache just doubled. You also won't have any breakaway system; if there's an accidental disconnect, there's nothing to bring your car to a stop.
Install a 4-way flat on your vehicle with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Ensures that your vehicle's wiring matches that of your trailer Works with 2-wire, 3-wire and pulse-width modulation (PWM) systems Connects directly to your battery to avoid overloading your vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Resists water and vibration thanks to potted enclosure Connects directly to your vehicle's wiring with the included quick-splice connectors Color-coded wires and wiring guide ease installation Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 5 amps per circuit Tail lights: 7.5 amps per circuit Limited 1-year warranty Installation To determine where to splice into your vehicle's tail light wiring, you will need to consult the included instructions.
Carry bigger, longer loads with this hitch-mounted load support. The adjustable-height system includes a 49" long, Vortex Aero crossbar; a tilting mast for easy loading; and a tie-down for transporting a ladder or kayak.Each load support has an angled side and a straight side. For an item with a curved shape - such as a kayak - position the loadstops with the angled sides facing each other on the crossbar.
Add loadstops to your Thule square bar crossbars to help secure heavy loads. Integrated tie-down points make it easy to secure lumber, ladders, canoes, or other gear.Features: Loadstops attach to your Thule square bar crossbars Built-in tie-down points make it easy to secure lumber, ladders, canoes, and other gear Includes 4 loadstops, 4 knobs with bolts, and instructions Specs: Application: Thule square crossbars bars that measure 1-1/4" wide x 7/8" tall Loadstops measure: 3-1/2" tall from the bar x 3" wide
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 10" x 2-1/4" Assemblies have rust-resistant, e-coated backing plates to protect from road debris. Fits 13" to 15" wheels.Note: The brakes will be very hot after doing this, so after every 10 stops you'll want to wait about 10 minutes to let the brakes cool off before continuing. If you don't, you might cook and crack the pad material.
Filters
