Take your camper off-road with custom tie-downs that ensure a safe, comfortable ride and zero loss of ground clearance. Discreetly mounts to the bed and bumper of your pickup to create secure attachment points for your camper that blend right in.Features: Creates attachment points for securing your camper to your truck bed Turnbuckles (sold separately) required to attach camper to tie-downs Ensures excellent handling without loss of ground clearance Distributes weight to keep setup from being too top-heavy Holds camper from several angles to prevent it from shifting Suited for your off-roading adventures and off-grid camping Guides your camper into the bed of your truck and keeps it from shifting side to side Rubber-padded guide locks on front brace center camper in bed and hold it snug Preserves your truck's good looks with discreet brackets and subtle anchor points Front support brace installs on the inside of the bed and between the bed and the cab Couplers remove from anchors installed on the bumper with a quarter-turn Made of steel for strength and durability Powder coated braces and chrome-plated anchors resist rust and corrosion Includes a front support brace, 2 rear anchors, 2 guide locks, and installation hardware Made in the USA 1-Year warranty A Safe and Comfortable Ride The HappiJac tie-downs distribute the weight of your camper across the truck's bed to keep the ride comfortable and the camper secure. Holding the camper taut at all four corners and from the front of the bed - as opposed to securing it on top of the bed rails, like a typical bed-mounted system - helps to reduce any front-to-back shifting of your camper during travel.
Custom-fit camper tie-downs permanently mount to your truck's body to distribute the weight of your camper and limit movement in all directions. Low-profile attachment points are discrete and rear anchors remove for a clean look.And with a quick quarter-turn, each rear anchor removes from the bracket to create a clean look. Sturdy Steel Construction HappiJac components are constructed of sturdy steel for a reliable and stable ride. The powder coated front tie-downs and chrome-plated rear anchors both resist rust and corrosion.
Electric camper jack system lets you load and unload your truck bed camper faster and easier than manual cranking. Jacks install permanently on the 4 corners of your camper. Zinc-plating resists corrosion.And it is conveniently labeled and color-coded for simple operation. Camper Jacks are Built to Last HappiJac camper jacks are built to last with heavy-duty, 2" square tubing for superior strength and durability. The internal steel Acme screw allows for easy cranking with up to 36-1/2" of travel.
Electric camper jack system lets you load and unload your truck bed camper faster and easier than manual cranking. Jacks install permanently on the 4 corners of your camper. Zinc-plating resists corrosion.And it is conveniently labeled and color-coded for simple operation. Camper Jacks are Built to Last HappiJac camper jacks are built to last with heavy-duty, 2" square tubing for superior strength and durability. The internal steel Acme screw allows for easy cranking with up to 34-1/2" of travel.
Take your camper off-road with custom tie-downs that ensure a safe, comfortable ride and zero loss of ground clearance. Discreetly mounts to the bed and bumper of your pickup to create secure attachment points for your camper that blend right in.Features: Creates attachment points for securing your camper to your truck bed Turnbuckles (sold separately) required to attach camper to tie-downs Ensures excellent handling without loss of ground clearance Distributes weight to keep setup from being too top-heavy Holds camper from several angles to prevent it from shifting Suited for your off-roading adventures and off-grid camping Guides your camper into the bed of your truck and keeps it from shifting side to side Rubber-padded guide locks on the front brace center camper in bed and hold it snug Preserves your truck's good looks with discreet brackets and subtle anchor points Front support brace installs on the inside of the bed and between the bed and the cab Couplers remove from anchors installed on the bumper with a quarter-turn Made of steel for strength and durability Powder coated braces and chrome-plated anchors resist rust and corrosion Includes a front support brace, 2 rear anchors, 2 guide locks, and installation hardware Made in the USA 1-Year warranty A Safe and Comfortable Ride The HappiJac tie-downs distribute the weight of your camper across the truck's bed to keep the ride comfortable and the camper secure. Holding the camper taut at all four corners and from the front of the bed - as opposed to securing it on top of the bed rails, like a typical bed-mounted system - helps to reduce any front-to-back shifting of your camper during travel.
Take your camper off-road with custom tie-downs that ensure a safe, comfortable ride and zero loss of ground clearance. Discreetly mounts to the bed and bumper of your pickup to create secure attachment points for your camper that blend right in.Features: Creates attachment points for securing your camper to your truck bed Turnbuckles (sold separately) required to attach camper to tie-downs Ensures excellent handling without loss of ground clearance Distributes weight to keep setup from being too top-heavy Holds camper from several angles to prevent it from shifting Suited for your off-roading adventures and off-grid camping Guides your camper into the bed of your truck and keeps it from shifting side to side Rubber-padded guide locks on front brace center camper in bed and hold it snug Preserves your truck's good looks with discreet brackets and subtle anchor points Front support brace installs on the inside of the bed and between the bed and the cab Couplers remove from anchors installed on the bumper with a quarter-turn Made of steel for strength and durability Powder coated braces and chrome-plated anchors resist rust and corrosion Includes a front support brace, 2 rear anchors, 2 guide locks, and installation hardware Made in the USA 1-Year warranty A Safe and Comfortable Ride The HappiJac tie-downs distribute the weight of your camper across the truck's bed to keep the ride comfortable and the camper secure. Holding the camper taut at all four corners and from the front of the bed - as opposed to securing it on top of the bed rails, like a typical bed-mounted system - helps to reduce any front-to-back shifting of your camper during travel.
Hi Kirk, The Voyager PWM Filter for Voyager RV Camera System part #VGR74VR doesn't install into your vehicle or RV's 7-way. This connector needs to be installed between the factory Voyager camera wiring and the camera itself. You can do this…
Hey Derrick! The Dometic RV Furnace #DMC94RR will pretty much work with any RV thermostat that is capable of running a furnace. The only one that might give you trouble is the Furrion Chill Cube wall thermostat since it seems to have issues with a…
Hello Gary, It sounds like you’ve already done most of the right troubleshooting, so you’re definitely on the right track. With the Voyager WiSight 2.0 system #ASA37YR, the most common issue when it won’t pair is actually power at the camera, not the…
Hi Mark, I don't have any database to confirm for you if the MORryde Safe-T-Rail Telescoping RV Hand Rail part #MR54BR will fit your Forest River IBEX 19QBS. However, the handle may fit if your trailer meets certain standards the handle requires…
Hey Curtis, thanks for reaching out. Yes, they will! As long as your Ram 3500 has a factory rear trailer hitch, the TorkLift Tie Downs #TL75FV will fit and work great. This includes both the front and rear tie downs so you'll just need to pick up…
Hey Ed, the Furrion Chill Cube RV Air Conditioner w Air Distribution Box #FR59TD is by far one of the most effective RV AC units out there that blows the coldest and has the highest BTU rating at 18k. What that means for you is that even though the…
This is a great question that there isn't exactly a great answer for. Hitch extenders not only put the weight further away from the hitch which would increase the leverage on the hitch, but they also add movement to the assembly which will…
Hey Keith, thanks for the information. The only replacement cover I have for your Dometic Duo-Therm Penguin Model 630515.321 is the item #AT3308046006, which is beige. What happened to your cover? You can add this information, along with any other…
Since you have Mor/Ryde RPB72-1621SHD that means your trailer has a Lippert 1621 pin box. That means that the 5th Airborne Premium Fifth Wheel Air Ride Coupler #5AB-E1621-610 that you referenced would be the correct air ride pin box. I attached an…
They really are very similar and interchangeable but the #MR84VR is for replacing a Lippert 1621 pin box whereas the part #MR94VR is for replacing a Trailair setup that also was for the 1621SHD.
Hey George, welcome back! To get that high of a capacity out of an extension, you'll need the Gen-Y Hitch Receiver Hitch Extender item #GY89SR. This works with a 2" hitch receiver and extends the hitch pin hole out 14". It has a 10,000…
Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…
Custom-fit camper tie-downs permanently mount to your truck's body to distribute the weight of your camper and limit movement in all directions. Low-profile attachment points are discrete and rear anchors remove for a clean look.And with a quick quarter-turn, each rear anchor removes from the bracket to create a clean look. Sturdy Steel Construction HappiJac components are constructed of sturdy steel for a reliable and stable ride. The powder coated front tie-downs and chrome-plated rear anchors both resist rust and corrosion.
Load and unload your truck bed camper with these manual camper jacks. Jacks install permanently on the 4 corners of your camper for stable and convenient loading and unloading.The jacks bolt on permanently to each corner of your camper and provide support to handle even multi-slide campers, which can weigh more than a traditional in-bed camper. Camper Jacks are Built to Last HappiJac camper jacks are built to last with heavy-duty, 2" square tubing for superior strength and durability. The internal steel Acme screw allows for easy cranking with up to 34-1/2" of travel.
Swing-out extension brackets allow you to adjust the location of your HappiJac truck camper jacks to give you additional clearance needed for dually pickup trucks. Includes 2 brackets and installation hardware.Features: Swing-out extension brackets allow you to adjust the location of your HappiJac truck camper jacks Works with electric or manual HappiJac camper jack systems (LC736514-4, LC736514-ELKIT, LC736515-4 or LC736515-ELKIT) Includes 2 brackets and installation hardware Made in the USA
Take your camper off-road with custom tie-downs that ensure a safe, comfortable ride and zero loss of ground clearance. Discreetly mounts to the bed and bumper of your pickup to create secure attachment points for your camper that blend right in.Features: Creates attachment points for securing your camper to your truck bed Turnbuckles (sold separately) required to attach camper to tie-downs Ensures excellent handling without loss of ground clearance Distributes weight to keep setup from being too top-heavy Holds camper from several angles to prevent it from shifting Suited for your off-roading adventures and off-grid camping Preserves your truck's good looks with discreet brackets and subtle anchor points Custom front support braces install between the bed and the cab Couplers remove from anchors installed on the bumper with a quarter-turn Made of steel for strength and durability Powder coated braces and chrome-plated anchors resist rust and corrosion Includes 2 front brackets with support braces, 2 bumper braces, 2 rear anchors, and installation hardware Made in the USA 1-Year warranty A Safe and Comfortable Ride The HappiJac tie-downs distribute the weight of your camper across the truck's bed to keep the ride comfortable and the camper secure. Holding the camper taut at all four corners and from the front of the bed - as opposed to securing it on top of the bed rails, like a typical bed-mounted system - helps to reduce any front-to-back shifting of your camper during travel.
The built-in levers on these turnbuckles allow you to quickly and easily secure your truck bed camper to your tie-down system. No twisting or manual adjustments needed. Internal springs help to reduce stress on tie-down points.HappiJac Qwik-Load handles eliminate this difficult step. The Qwik-Load design means you won't have to make these manual adjustments every time.
Take your camper off-road with custom tie-downs that ensure a safe, comfortable ride and zero loss of ground clearance. Discreetly mounts to the bed and bumper of your pickup to create secure attachment points for your camper that blend right in.Features: Creates attachment points for securing your camper to your truck bed Turnbuckles (sold separately) required to attach camper to tie-downs Ensures excellent handling without loss of ground clearance Distributes weight to keep setup from being too top-heavy Holds camper from several angles to prevent it from shifting Suited for your off-roading adventures and off-grid camping Guides your camper into the bed of your truck and keeps it from shifting side to side Rubber-padded guide locks on front brace center camper in bed and hold it snug Preserves your truck's good looks with discreet brackets and subtle anchor points Front support brace installs on the inside of the bed and between the bed and the cab Couplers remove from anchors installed on the bumper with a quarter-turn Made of steel for strength and durability Powder coated braces and chrome-plated anchors resist rust and corrosion Includes a front support brace, 2 rear anchors, 2 guide locks, and installation hardware Made in the USA 1-Year warranty A Safe and Comfortable Ride The HappiJac tie-downs distribute the weight of your camper across the truck's bed to keep the ride comfortable and the camper secure. Holding the camper taut at all four corners and from the front of the bed - as opposed to securing it on top of the bed rails, like a typical bed-mounted system - helps to reduce any front-to-back shifting of your camper during travel.
Stainless steel turnbuckles allow you to firmly secure your truck bed camper to your tie-down system. Internal springs on front turnbuckles help to reduce stress on tie-down points.Upgrade Anytime to Qwik-Load Operation For faster operation, you can upgrade these standard turnbuckles with the HappiJac Qwik-Load system (LC182894). The Qwik-Load handles keep you from having to hand-tighten each turnbuckle, and they allow you to quickly and easily disconnect.
Load and unload your truck bed camper with these manual camper jacks. Jacks install permanently on the 4 corners of your camper for stable and convenient loading and unloading.The jacks bolt on permanently to each corner of your camper and provide support to handle even multi-slide campers, which can weigh more than a traditional in-bed camper. Camper Jacks are Built to Last HappiJac camper jacks are built to last with heavy-duty, 2" square tubing for superior strength and durability. The internal steel Acme screw allows for easy cranking with up to 36-1/2" of travel.
Take your camper off-road with custom tie-downs that ensure a safe, comfortable ride and zero loss of ground clearance. Discreetly mounts to the bed and bumper of your pickup to create secure attachment points for your camper that blend right in.Features: Creates attachment points for securing your camper to your truck bed Turnbuckles (sold separately) required to attach camper to tie-downs Ensures excellent handling without loss of ground clearance Distributes weight to keep setup from being too top-heavy Holds camper from several angles to prevent it from shifting Suited for your off-roading adventures and off-grid camping Guides your camper into the bed of your truck and keeps it from shifting side to side Rubber-padded guide locks on front brace center camper in bed and hold it snug Preserves your truck's good looks with discreet brackets and subtle anchor points Front support brace installs on the inside of the bed and between the bed and the cab Couplers remove from anchors installed on the bumper with a quarter-turn Made of steel for strength and durability Powder coated braces and chrome-plated anchors resist rust and corrosion Includes a front support brace, 2 rear anchors, 2 guide locks, and installation hardware Made in the USA 1-Year warranty A Safe and Comfortable Ride The HappiJac tie-downs distribute the weight of your camper across the truck's bed to keep the ride comfortable and the camper secure. Holding the camper taut at all four corners and from the front of the bed - as opposed to securing it on top of the bed rails, like a typical bed-mounted system - helps to reduce any front-to-back shifting of your camper during travel.
The built-in levers on these short turnbuckles allow you to quickly and easily secure your truck bed camper to your tie-down system. Used to secure the camper to the HappiJac tie-downs on your flatbed truck. 11" Threaded hook.Features: Turnbuckles secure your camper to the tie-downs (sold separately) mounted on your truck J-hooks provide strong, secure connections to anchor points Built-in lever lets you cinch turnbuckle down in seconds - no twisting or manual adjustments necessary Push down on handle once hooks are in place to tighten Pop handle up to release Spring action helps to prevent damage by reducing stress on camper High-profile, easy-to-grip rubberized handles for comfortable use Keeps you from smashing your knuckles agains the turnbuckle when locking down Detaches easily for storage after turnbuckle secures with included pin Stainless steel bodies are durable and rustproof Zinc coated, reinforced 1/2" solid steel round hooks resist rust and swivel for easy positioning Set includes 4 spring-loaded turnbuckles with 11" threaded hook Made in the USA Specs: Application: flatbed trucks with HappiJac camper tie-downs Turnbuckle length: Minimum reach: 16-1/2" Maximum reach: 23-1/2" Threaded hook length: 11" 1-Year warranty
Give your camper jacks more clearance and stability with this installation bracket. Provides up to 5" additional clearance on your dual-wheel truck camper jacks. Resists rust and corrosion with a white powder coat finish.
Replaces 1 jack for your HappiJac truck camper jack system. Works on manual or electric systems (LC736514-4 or LC736514-ELKIT). Maintenance-free Acme screw allows for smooth cranking.Features: Replaces 1 jack for your HappiJac truck camper jack system (LC736514-4 or LC736514-ELKIT) Smooth, easy cranking thanks to maintenance-free Acme screw Self-lubricating nut prevents overextension of jack Square tubing provides superior strength and durability Concave footpad reduces movement and provides increased stability Locking lever keeps jack at desired height Lower lever when lifting or lowering jack Raise lever to lock jack in place Zinc-plated inner and outer tubes resist rust and corrosion Outer tube has powder coat finish for added protection against the elements Made in the USA Specs: Capacity: 2,200 lbs Lift: 34-1/2" Outer tube height: 51" Tube width: 2" 1-Year warranty
Replaces 1 jack for your HappiJac truck camper jack system. Works on manual or electric systems (LC736515-4 or LC736515-ELKIT). Maintenance-free Acme screw allows for smooth cranking.Features: Replaces 1 jack for your HappiJac truck camper jack system (LC736515-4 or LC736515-ELKIT) Smooth, easy cranking thanks to maintenance-free Acme screw Self-lubricating nut prevents overextension of jack Square tubing provides superior strength and durability Concave footpad reduces movement and provides increased stability Locking lever keeps jack at desired height Lower lever when lifting or lowering jack Raise lever to lock jack in place Zinc-plated inner and outer tubes resist rust and corrosion Outer tube has powder coat finish for added protection against the elements Made in the USA Specs: Capacity: 2,800 lbs Lift: 36-1/2" Outer tube height: 51" Tube width: 2" 1-Year warranty
Replaces the clutchless motor heads, circuit board, and remote for your HappiJac electric truck camper jack system (LC736514-ELKIT or LC736515-ELKIT).Features: Replaces the clutchless motor heads, circuit board, and remote for your electric HappiJac truck camper jack system Compatible with camper jack systems LC736514-ELKIT and LC736515-ELKIT User-friendly, wireless remote control lets you operate each jack independently or simultaneously Includes 4 clutchless, current-sensing motors, circuit board, and remote control Made in the USA
Take your camper off-road with custom tie-downs that ensure a safe, comfortable ride and zero loss of ground clearance. Discreetly mounts to the bed and bumper of your pickup to create secure attachment points for your camper that blend right in.Features: Creates attachment points for securing your camper to your truck bed Turnbuckles (sold separately) required to attach camper to tie-downs Ensures excellent handling without loss of ground clearance Distributes weight to keep setup from being too top-heavy Holds camper from several angles to prevent it from shifting Suited for your off-roading adventures and off-grid camping Preserves your truck's good looks with out-of-sight brackets and subtle anchor points Custom front support braces install on your truck's frame under the bed Couplers remove from anchors with a quarter-turn Made of steel for strength and durability Powder coated braces and chrome-plated anchors resist rust and corrosion Includes 2 front support braces, 2 front and rear anchors, and installation hardware Made in the USA 1-Year warranty A Safe and Comfortable Ride The HappiJac tie-downs distribute the weight of your camper across the truck's bed to keep the ride comfortable and the camper secure. Holding the camper taut at all four corners - as opposed to securing it on top of the bed rails, like a typical bed-mounted system - helps to reduce any front-to-back shifting of your camper during travel.
Perfect for truck campers with HappiJac camper feet, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area adds extra stability on soft ground. ... Your jack feet sit in a pad that sheds water instead of holding it against the metal. Specs Application: Truck campers that use the Lippert HappiJac Camper Feet Dimensions: 7-3/4" long x 7-3/4" wide x 2-3/4" tall
Replaces the remote control for your HappiJac electric camper jack system (LC736514-ELKIT or LC736515-ELKIT).Features: Replaces the remote control for your HappiJac electric camper jack system Compatible with camper jack systems LC736514-ELKIT and LC736515-ELKIT Allows you to extend and retract your camper jacks either independently or simultaneously Made in the USA Note: This remote will only work with Happijac controllers with a 25 amp control board and fuses.
Perfect for lifted trucks, these jack lift extenders provide 6" of additional vertical clearance when you load and unload your truck bed camper. Simply bolt the extenders to the bottoms of your jacks and you are ready to go.Features: Camper jack lift extenders provide 6" of additional vertical clearance when you load and unload your truck bed camper Designed for use with HappiJac camper jacks Perfect for lifted trucks Extension pieces easily bolt to the bottoms of your jacks with the included hardware Square tubing provides superior strength and durability Concave footpads reduce movement and provide increased stability Quantity: 4 extenders Made in the USA
Filters
