Replaces the Velcro Brand fasteners on TruXedo Lo Pro or Original Edge tonneau covers.Features: Replaces the Velcro Brand fasteners on TruXedo Lo Pro tonneau covers Works on 6-1/2' long truck beds or can be cut down for shorter beds Slides into rail for easy installation Specs: Dimensions: 80" long x 1-5/16" wide Includes 2 Velcro Brand fasteners Notes: This fastener replaces the hook piece which attaches the tonneau cover to the truck rails.
We've handled a lot of racks and can confidently say the RV Rider is one of the few that can carry a couple 80-lb fat-tire e-bikes on the back of a motorhome or 5th wheel. It's sturdy, versatile, and a steal for the value it provides.They secure in place with easy-to-use hand knobs, and ratchet straps fasten the wheels to the hoops. These universal wheel hoops will fit standard and fat tires up to 5" wide. Folding, Tilting Design The rack tilts up and down, without bikes loaded, for storage and access to your rear cargo area.
The V-bar studs on each cross chain of these heavy-duty, twist-link snow chains bite into frozen roads to give you excellent traction in deep snow and ice. Also ideal for off-roading in boggy areas. Chains mount easily and tension with cams.On the back of the tire, pull the chain tight and hook the ends together. Repeat this on the front of the tire, then clamp the lever to fasten extra chain links and keep them from flapping as you drive. 4. Insert the included tool into the cam and twist to tighten the sidewall chain.
7,500-lb Capacity. Heavy duty air springs support rear suspension for safety and stability when hauling your heaviest loads. Springs reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.Air Spring Installation Each RED Label kit includes vehicle -specific brackets, fasteners, and hardware for fast, no-drill installation. The hardware installs directly on your axle and frame and the air springs install onto the mounting points provided by the brackets.
If you're tired of loose ramps slowing you down and throwing off your setup, RapidRamps help manage that chaos. Install them once and use them for just about anything you need to load.Specs Dimensions And Quantity: Ramps: 2 ramps, 72" Index bars: 2 bars, 38" Latch locks: 2 locks Inside pin length (span): 1/2" Overall length: 4-1/8" Pin diameter: 1/4" Mounting hardware: all brackets and fasteners included Weight Capacity: Max load: 6,000 lbs per pair (3,000 lbs per ramp) Construction: Ramp mounts: black powder-coated steel with e-coat Ramp: silver aluminum Index bar: yellow zinc Locks: chrome-plated steel Warranty: 1-Year limited
94" Long. This set of E tracks lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and much more.For best results, make sure the track is level, use self-tapping or wood screws (not included), and fasten directly into the studs. Available Backing Plates for Additional Support For a more secure fit, you can add backing plates to your E Track.
7,500-lb Capacity. Heavy duty air springs support rear suspension for safety and stability when hauling your heaviest loads. Springs reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.Air Spring Installation Each RED Label Extreme Duty kit includes vehicle -specific brackets, fasteners, and hardware for fast, no-drill installation. The hardware installs directly on your axle and frame and the air springs install onto the mounting points provided by the brackets.
You can install this retractable, hard tonneau cover on your vehicle in about 10 minutes, and you can completely remove it just as quickly for full bed access. Aluminum and vinyl deck has strength of a hard cover and seamless look of a soft cover.To hold the pull strap off the floor of your truck bed, apply the adhesive hook-and-loop fastener strip onto the underside of a rail at your desired location. Remove or Reinstall in 10 Minutes After the initial installation, the tonneau cover can be completely removed or reinstalled in approximately 10 minutes.
Streamline the leveling process with this set of interlocking, stackable blocks. Durable, UV-stabilized resin construction accommodates single and dual wheel trailers and can be used with a variety of other stabilizing equipment.
Replaces the hook-side fastener strips (hook-and-loop fasteners are similar to Velcro) for your TruXedo TruXport 6-1/2' bed tonneau cover. Includes the self-tapping screws needed to install the hook-side strips onto your truck rails.Features: Replaces the hook-side fastener strips (hook-and-loop fasteners are similar to Velcro) for TruXedo TruXport short bed tonneau covers Driver's-side and passenger's-side pieces attach to the truck rails - mating loop piece is on tonneau cover Dimensions: 80" long x 1" wide Included: 2 hook-side strips and self-tapping screws needed for installation
Replaces the Velcro Brand fasteners on Truxedo Lo Pro or Edge tonneau covers.Features: Replaces the Velcro Brand fasteners on Truxedo Lo Pro or Edge tonneau covers Slides into rail for easy installation Specs: Dimensions: 96" long x 1-1/4" wide Qty: 2 Velcro Brand fasteners Note: This fastener replaces the hook piece which attaches the tonneau cover to the truck rails.
Electric-hydraulic brake actuator works with your brake controller (sold separately) to activate your trailer's disc brakes. Vented housing releases heat and moisture. Enhanced wiring protection safeguards internal electronics.All of this is cleanly secured within the aluminum housing by stainless steel fasteners, while Goretite seals protect the internal electronics from exposure to water and other elements. The DX series also remains compatible with most aftermarket and OEM-integrated electric brake controllers on the market.
Perfect for use with high-powered fans, this cover has a wide vent area so that it provides more airflow than standard covers. EZClip pins allow the cover to be opened and closed with ease. No-drill installation on MaxxFan and MaxxFan Plus vents.The MaxxFan roof vent has pre-drilled holes in the side wall that are hidden under plastic plugs. Just remove the plugs and fasten the aluminum brackets to the side wall with the stainless steel screws. Then insert the EZClip pins through the brackets to secure the cover in place.
Durable, UV-resistant cover lets you run your RV roof vent any time and in any weather. Angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out. EZClip pins allow the cover to be opened or removed for easy maintenance.The MaxxFan roof vent has pre-drilled holes in the side wall that are hidden under plastic plugs. Just remove the plugs and fasten the aluminum brackets to the side wall with stainless steel screws. Then insert the EZClip pins through the brackets to secure the cover in place.
Durable, UV-resistant cover lets you run your RV roof vent any time and in any weather. Angled louvers allow smoke, heat, and odors to escape while keeping rain and debris out. EZClip pins allow the cover to be opened or removed for easy maintenance.The MaxxFan roof vent has pre-drilled holes in the side wall that are hidden under plastic plugs. Just remove the plugs and fasten the aluminum brackets to the side wall with stainless steel screws. Then insert the EZClip pins through the brackets to secure the cover in place.
The hinged ball socket and pin fastener on this coupler ensure a secure connection every time. The flip latch pulls the collar back to open the ball socket. The black powder coat finish is corrosion resistant.Features: A-frame coupler lets you hook up your trailer to your tow vehicle Provides connection point for hitch ball Sleeve-lock design ensures tight fit around hitch ball for secure connection Pin-style fastener holds collar in place around base of hinged ball socket Flip latch lets you quickly and easily pull back collar to open ball socket Low-profile design is sleek in appearance Unique coupler head has a symmetric, flat top Self-adjusting head makes coupling quick and easy Sturdy, solid steel construction is strong and durable Black powder coat finish provides corrosion resistance Built-in jack-attachment point allows for quick, easy mounting of round utility jack SAE J684 certified Specs: Ball size: 2" Jack hole diameter: 2-1/4" Overall dimensions: 16-1/4" long x 9-7/8" wide Pin hole diameter: 5/16" Minimum span needed for pin or pin lock: 2-1/8" (3) 3/8" - 16 UNC bolts required for mounting Weight capacity: 7,000 lbs 1-Year warranty
Replacement Velcro Brand fastener strips for Truxedo TruXport covers on 8' beds.Features: Replacement Velcro Brand fastener strips for Truxedo TruXport covers - 8' beds Hook side of Velcro only that attaches to bed rail Dimensions: 96" long x 1" wide Qty: 2 fastener strips
Streamline the leveling process with this set of interlocking, stackable blocks. Durable, UV-stabilized resin construction accommodates single and dual wheel trailers and can be used with a variety of other stabilizing equipment.
These low-profile replacement fasteners secure your removable windshield to your boat. Threaded end screws into your boat's deck. Fastener head, nut, and rubber grommet connect to drilled hole in your boat's windshield.Features: Replacement fasteners secure your boat's removable windshield to your bow Low-profile design - only the fastener head appears on your windshield Bolt end discretely threads into your boat's deck Nuts and rubber grommets to secure to windshield included Quantity: 4 fasteners Made in the USA
The hinged ball socket and pin fastener on this coupler ensure a secure connection every time. The flip latch pulls the collar back to open the ball socket. The black powder coat finish is corrosion resistant.Features: A-frame coupler lets you hook up your trailer to your tow vehicle Provides connection point for hitch ball Sleeve-lock design ensures tight fit around hitch ball for secure connection Pin-style fastener holds collar in place around base of hinged ball socket Flip latch lets you quickly and easily pull back collar to open ball socket Low-profile design is sleek in appearance Unique coupler head has a symmetric, flat top Self-adjusting head makes coupling quick and easy Sturdy, solid steel construction is strong and durable Black powder coat finish provides corrosion resistance Built-in jack-attachment point allows for quick, easy mounting of round utility jack SAE J684 certified Specs: Ball size: 2-5/16" Jack hole diameter: 2-1/4" Overall dimensions: 17-1/4" long x 10-1/4" wide Pin hole diameter: 5/16" Minimum span needed for pin or pin lock: 2-1/4" Weight capacity: 12,500 lbs 1-Year warranty
Perfect for use with high-powered fans, this cover has a wide vent area so that it provides more airflow than standard covers. EZClip pins allow the cover to be opened and closed with ease. No-drill installation on MaxxFan and MaxxFan Plus vents.The MaxxFan roof vent has pre-drilled holes in the side wall that are hidden under plastic plugs. Just remove the plugs and fasten the aluminum brackets to the side wall with the stainless steel screws. Then insert the EZClip pins through the brackets to secure the cover in place.
Snap fastener installation tool allows you to easily install snaps on your boat covers, tarps, and more. Includes die and setting tool.Features: Snap fastener installation tool allows you to easily install snaps on your boat covers, tarps, and more Includes die and setting tool Made in the USA Limited lifetime warranty
If you're tired of loose ramps slowing you down and throwing off your setup, RapidRamps help manage that chaos. Install them once and use them for just about anything you need to load.Specs Dimensions And Quantity: Ramps: 2 ramps, 60" Index bars: 2 bars, 38" Latch locks: 2 locks Inside pin length (span): 1/2" Overall length: 4-1/8" Pin diameter: 1/4" Mounting hardware: all brackets and fasteners included Weight Capacity: Max load: 6,000 lbs per pair (3,000 lbs per ramp) Construction: Ramp mounts: black powder-coated steel with e-coat Ramp: silver aluminum Index bar: yellow zinc Locks: chrome-plated steel Warranty: 1-Year limited
If you're tired of loose ramps slowing you down and throwing off your setup, RapidRamps help manage that chaos. Install them once and use them for just about anything you need to load.Specs Dimensions And Quantity: Ramps: 2 ramps, 72" Index bars: 2 bars, 28" Latch locks: 2 locks Inside pin length (span): 1/2" Overall length: 4-1/8" Pin diameter: 1/4" Mounting hardware: all brackets and fasteners included Weight Capacity: Max load: 6,000 lbs per pair (3,000 lbs per ramp) Construction: Ramp mounts: black powder-coated steel with e-coat Ramp: silver aluminum Index bar: yellow zinc Locks: chrome-plated steel Warranty: 1-Year limited
Filters
