Marine-grade, free-backing hydraulic drum brakes won't engage in reverse, even if your actuator is activated. Automotive-grade friction pads are long-lasting. Dacromet-coated backing plates resist rust. Fit 14" to 15" wheels.Features: Marine-grade hydraulic drum brake assemblies are great for boat trailers Designed for use with surge-type trailer brake actuators Free-backing design lets you back up without engaging the trailer brakes, even if the actuator is activated Fall-away brake shoes only anchor on drums when brakes are engaged as trailer is moving forward Automotive-grade friction material is molded to brake shoes Pads are fully bonded - not riveted - to shoes for long life and more braking torque Less chance of cracking and crumbling that can lead to mechanical lockup, thanks to tapered edge and circular grinding Periodic manual adjustment required Fine-tooth brake adjustment gears allow for a more precise setting Dacromet coating on backing plates offers superior corrosion resistance Ideal for use on a boat or snowmobile trailer Durable enough for saltwater applications Stainless steel springs are durable and rustproof Aluminum hydraulic cylinders resist rust Single plunger design Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes Left-hand (driver's-side) brake assembly, right-hand (passenger's-side) brake assembly, and mounting bolts included Nuts and lock washers (BRKH10B) sold separately QAI and CSA certified Specs: Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO Dimensions: 10" diameter x 2-1/4" wide Mounting flange bolt pattern: 4 bolt Wheel size: 14" and 15" Axle rating: 3,500 lbs Limited 1-year warranty Note : Because free-backing brakes are designed to eliminate nearly all friction between the brake shoes and the drum when you are driving in reverse, a trailer breakaway kit will not be effective should your trailer disconnect from your tow vehicle while you are backing up.
Dacromet backing plates fight rust and corrosion resistance. Ideal for boat trailers near saltwater. 10" x 2-1/4" Assemblies have premium brake pads. ... You'll get the best corrosion protection that drum brakes have to offer. These brake assemblies are almost entirely coated in Dacromet. The only place you won't find it is on the rustproof aluminum cylinder and the stainless steel springs. Thoroughly Tested for Safety These brake assemblies meet the requirements for certification by the CSA .
Marine-grade, free-backing hydraulic drum brakes won't engage in reverse, even if your actuator is activated. Automotive-grade friction pads are long-lasting. Dacromet-coated backing plates resist rust. Fit 14-1/2" to 16-1/2" wheels.Features: Marine-grade hydraulic drum brake assemblies are great for boat trailers Designed for use with surge-type trailer brake actuators Free-backing design lets you back up without engaging the trailer brakes, even if the actuator is activated Fall-away brake shoes only anchor on drums when brakes are engaged as trailer is moving forward Automotive-grade friction material is molded to brake shoes Pads are fully bonded - not riveted - to shoes for long life and more braking torque Less chance of cracking and crumbling that can lead to mechanical lockup, thanks to tapered edge and circular grinding Periodic manual adjustment required Fine-tooth brake adjustment gears allow for a more precise setting Dacromet coating on backing plates offers superior corrosion resistance Ideal for use on a boat or snowmobile trailer Durable enough for saltwater applications Stainless steel springs are durable and rustproof Aluminum hydraulic cylinders resist rust Single plunger design Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes Left-hand (driver's-side) brake assembly and right-hand (passenger's-side) brake assembly included Mounting bolts and hardware (BRKH12) sold separately QAI and CSA certified Specs: Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15", 16" and 16-1/2" Axle rating: 5,200 lbs, 6,000 lbs, and 7,000 lbs Limited 1-year warranty Note : Because free-backing brakes are designed to eliminate nearly all friction between the brake shoes and the drum when you are driving in reverse, a trailer breakaway kit will not be effective should your trailer disconnect from your tow vehicle while you are backing up.
Tired of rusty, flaking running gear on your trailer? Need more corrosion protection for launching your boat or towing over heavily treated roads? Upgrade your suspension with this long-lasting, supremely rust-resistant leaf spring.Basically, this rating shows the amount of time it takes for a material to show signs of corrosion when exposed to pure, continuous salt spray. We conducted our own salt spray test and found that this dacromet coating lasts up to 744 hours before it begins to deteriorate. Compare that to some other dacromet coatings out there that are rated at just 300 hours - or zinc coatings that don't last for even that long - and you can be sure these springs will last.
Tired of rusty, flaking running gear on your trailer? Need more corrosion protection for launching your boat or towing over heavily treated roads? Upgrade your suspension with this long-lasting, supremely rust-resistant slipper leaf spring.Basically, this rating shows the amount of time it takes for a material to show signs of corrosion when exposed to pure, continuous salt spray. We conducted our own salt spray test and found that this dacromet coating lasts up to 744 hours before it begins to deteriorate. Compare that to some other dacromet coatings out there that are rated at just 300 hours - or zinc coatings that don't last for even that long - and you can be sure these springs will last.
Corrosion-resistant Dacromet electric drum brakes have automotive-grade brake pads. 12" x 2" Assemblies have automotive-grade brake pads. Fits 14-1/2" to 16-1/2" wheels.For comparison, zinc plating typically begins to deteriorate after about 100 hours. The Dacromet coating on these brake assemblies lasts about 700 hours in the salt spray test. Automotive-Grade Brake Pads The pads on these trailer brakes are made of the same friction material that you might find on a car's drum brakes.
Tired of rusty, flaking running gear on your trailer? Need more corrosion protection for launching your boat or towing over heavily treated roads? Upgrade your suspension with this long-lasting, supremely rust-resistant leaf spring.Basically, this rating shows the amount of time it takes for a material to show signs of corrosion when exposed to pure, continuous salt spray. We conducted our own salt spray test and found that this dacromet coating lasts up to 744 hours before it begins to deteriorate. Compare that to some other dacromet coatings out there that are rated at just 300 hours - or zinc coatings that don't last for even that long - and you can be sure these springs will last.
Tired of rusty, flaking running gear on your trailer? Need more corrosion protection for launching your boat or towing over heavily treated roads? Upgrade your suspension with this long-lasting, supremely rust-resistant leaf spring.Basically, this rating shows the amount of time it takes for a material to show signs of corrosion when exposed to pure, continuous salt spray. We conducted our own salt spray test and found that this dacromet coating lasts up to 744 hours before it begins to deteriorate. Compare that to some other dacromet coatings out there that are rated at just 300 hours - or zinc coatings that don't last for even that long - and you can be sure these springs will last.
Tired of rusty, flaking running gear on your trailer? Need more corrosion protection for launching your boat or towing over heavily treated roads? Upgrade your suspension with this long-lasting, supremely rust-resistant leaf spring.Basically, this rating shows the amount of time it takes for a material to show signs of corrosion when exposed to pure, continuous salt spray. We conducted our own salt spray test and found that this dacromet coating lasts up to 744 hours before it begins to deteriorate. Compare that to some other dacromet coatings out there that are rated at just 300 hours - or zinc coatings that don't last for even that long - and you can be sure these springs will last.
Tired of rusty, flaking running gear on your trailer? Need more corrosion protection for launching your boat or towing over heavily treated roads? Upgrade your suspension with this long-lasting, supremely rust-resistant leaf spring.Basically, this rating shows the amount of time it takes for a material to show signs of corrosion when exposed to pure, continuous salt spray. We conducted our own salt spray test and found that this dacromet coating lasts up to 744 hours before it begins to deteriorate. Compare that to some other dacromet coatings out there that are rated at just 300 hours - or zinc coatings that don't last for even that long - and you can be sure these springs will last.
Tired of rusty, flaking running gear on your trailer? Need more corrosion protection for launching your boat or towing over heavily treated roads? Upgrade your suspension with this long-lasting, supremely rust-resistant leaf spring.Basically, this rating shows the amount of time it takes for a material to show signs of corrosion when exposed to pure, continuous salt spray. We conducted our own salt spray test and found that this dacromet coating lasts up to 744 hours before it begins to deteriorate. Compare that to some other dacromet coatings out there that are rated at just 300 hours - or zinc coatings that don't last for even that long - and you can be sure these springs will last.
Tired of rusty, flaking running gear on your trailer? Need more corrosion protection for launching your boat or towing over heavily treated roads? Upgrade your suspension with this long-lasting, supremely rust-resistant leaf spring.Basically, this rating shows the amount of time it takes for a material to show signs of corrosion when exposed to pure, continuous salt spray. We conducted our own salt spray test and found that this dacromet coating lasts up to 744 hours before it begins to deteriorate. Compare that to some other dacromet coatings out there that are rated at just 300 hours - or zinc coatings that don't last for even that long - and you can be sure these springs will last.
Tired of rusty, flaking running gear on your trailer? Need more corrosion protection for launching your boat or towing over heavily treated roads? Upgrade your suspension with this long-lasting, supremely rust-resistant leaf spring.Basically, this rating shows the amount of time it takes for a material to show signs of corrosion when exposed to pure, continuous salt spray. We conducted our own salt spray test and found that this dacromet coating lasts up to 744 hours before it begins to deteriorate. Compare that to some other dacromet coatings out there that are rated at just 300 hours - or zinc coatings that don't last for even that long - and you can be sure these springs will last.
Tired of rusty, flaking running gear on your trailer? Need more corrosion protection for launching your boat or towing over heavily treated roads? Upgrade your suspension with this long-lasting, supremely rust-resistant leaf spring.Basically, this rating shows the amount of time it takes for a material to show signs of corrosion when exposed to pure, continuous salt spray. We conducted our own salt spray test and found that this dacromet coating lasts up to 744 hours before it begins to deteriorate. Compare that to some other dacromet coatings out there that are rated at just 300 hours - or zinc coatings that don't last for even that long - and you can be sure these springs will last.
Tired of rusty, flaking running gear on your trailer? Need more corrosion protection for launching your boat or towing over heavily treated roads? Upgrade your suspension with this long-lasting, supremely rust-resistant slipper leaf spring.Basically, this rating shows the amount of time it takes for a material to show signs of corrosion when exposed to pure, continuous salt spray. We conducted our own salt spray test and found that this dacromet coating lasts up to 744 hours before it begins to deteriorate. Compare that to some other dacromet coatings out there that are rated at just 300 hours - or zinc coatings that don't last for even that long - and you can be sure these springs will last.
... Includes 2 hub-and-rotor assemblies, 2 calipers and 2 mounting brackets, all Dacromet-plated for superior corrosion resistance.Features: Disc brakes deliver better performance Consistent stopping even at highway speeds Shorter stopping distance than drum brakes Lower maintenance costs than for drum brakes Fewer moving parts to repair or replace Set includes 2 hub-and-rotor assemblies, 2 calipers, 2 mounting brackets, races and bolts Hardware for attaching bracket to flanges sold separately Brake lines, grease caps, seals and bearings sold separately Dacromet plating for increased durability - great for saltwater applications 500-Hour salt-spray rating Specs: Fits: Axle capacity: 3,500 lbs Wheel size: 14" to 15" Bolt pattern: 5 on 4-1/2" 3-Year warranty Bearings, Races, and Seal Information Bearings (sold separately) Inner bearing: L68149 Outer bearing: L44649 Races (sold separately) Inner race: L68111 Outer race: L44610 Seal (sold separately): RG06-050 Inner diameter: 1.719" Outer diameter: 2.565" Notes: Disc brakes require a higher line pressure (1,500 psi) than standard drum brakes (1,000 psi).
Marine-grade, free-backing hydraulic drum brakes won't engage in reverse, even if your actuator is activated. Automotive-grade friction pads are long-lasting. Dacromet-coated backing plates resist rust. Fit 14-1/2" to 16-1/2" wheels.Features: Marine-grade hydraulic drum brake assemblies are great for boat trailers Designed for use with surge-type trailer brake actuators Free-backing design lets you back up without engaging the trailer brakes, even if the actuator is activated Fall-away brake shoes only anchor on drums when brakes are engaged as trailer is moving forward Automotive-grade friction material is molded to brake shoes Pads are fully bonded - not riveted - to shoes for long life and more braking torque Less chance of cracking and crumbling that can lead to mechanical lockup, thanks to tapered edge and circular grinding Periodic manual adjustment required Fine-tooth brake adjustment gears allow for a more precise setting Dacromet coating on backing plates offers superior corrosion resistance Ideal for use on a boat or snowmobile trailer Durable enough for saltwater applications Stainless steel springs are durable and rustproof Aluminum hydraulic cylinders resist rust Single plunger design Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes Left-hand (driver's-side) brake assemblies and right-hand (passenger's-side) brake assemblies included Ideal for building multiple trailers Mounting bolts and hardware (BRKH1210) sold separately QAI and CSA certified Specs: Quantity: 10 left-hand and 10 right-hand assemblies Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15", 16" and 16-1/2" Axle rating: 5,200 lbs, 6,000 lbs, and 7,000 lbs Limited 1-year warranty Note : Because free-backing brakes are designed to eliminate nearly all friction between the brake shoes and the drum when you are driving in reverse, a trailer breakaway kit will not be effective should your trailer disconnect from your tow vehicle while you are backing up.
Great for coastal or snowy areas, these Dacromet-coated disc brakes offer a safe ride. Short stopping distances and consistent braking keep your trailer from pushing and pulling. ... Because disc brakes last longer than drum brakes, you should consider how things like rust might impact your trailer over time. The Dacromet coating on these brakes offers great corrosion protection, even with frequent use in freshwater and saltwater. It can withstand 300 to 400 hours of continual exposure to salt spray before corrosion begins, which is comparable to galvanized steel.
Marine-grade, driver's-side and passenger's-side hydraulic drum brakes have single plungers. Automotive-grade friction pads are long-lasting. Dacromet-coated backing plates are extremely corrosion resistant. Fit 13" to 15" wheels.Features: Marine-grade hydraulic drum brake assemblies are great for boat trailers Designed for use with surge-type trailer brake actuators Automotive-grade friction material is molded to brake shoes Pads are fully bonded - not riveted - to shoes for long life and more braking torque Less chance of cracking and crumbling that can lead to mechanical lockup, thanks to tapered edge and circular grinding Periodic manual adjustment required Fine-tooth brake adjustment gears allow for a more precise setting Dacromet coating on backing plates offers superior corrosion resistance Ideal for use on a boat or snowmobile trailer Durable enough for saltwater applications Stainless steel springs are durable and rustproof Aluminum hydraulic cylinders resist rust Single plunger design Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes Left-hand (driver's-side) brake assemblies, right-hand (passenger's-side) brake assemblies, and mounting bolts included Ideal for building multiple trailers Nuts and lock washers (BRKH10B10) sold separately QAI and CSA certified Specs: Quantity: 10 left-hand and 10 right-hand assemblies Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO Dimensions: 10" diameter x 2-1/4" wide Mounting flange bolt pattern: 4 bolt Wheel size: 13", 14", and 15" Axle rating: 3,500 lbs Limited 1-year warranty These trailer brake assemblies act as part of your trailer's hydraulic braking system.
Perfect for coastal or snowy areas, these Dacromet- and KodaGuard-coated disc brakes offer a safe ride. Short stopping distances and consistent braking keep your trailer from pushing and pulling. ... Because disc brakes last longer than drum brakes, you should consider how things like rust might impact your trailer over time. The Dacromet coating on these brakes offers great corrosion protection, even with frequent use in freshwater and saltwater. It can withstand 300 to 400 hours of continual exposure to salt spray before corrosion begins, which is comparable to galvanized steel.
Rust-resistant disc brake kit is great for boat trailers. Includes 2 KodaGuard-plated calipers; 2 Dacromet-plated, slip-on rotors and brackets; and 4 stainless steel caliper mounting bolts. Fits 3,500-lb axles and 14" and larger wheels.This 600-hour salt spray rating indicates that this product is not only durable enough to last in freshwater environments, but it can also be used on trailers that come into contact with saltwater. In addition, the rotors and caliper mounting brackets have a Dacromet plating, which offers a 300- to 400-hour salt spray rating. The pistons, the brake pad backings, and the caliper mounting bolts are stainless steel.
Perfect for coastal or snowy areas, these Dacromet- and KodaGuard-coated disc brakes offer a safe ride. Short stopping distances and consistent braking keep your trailer from pushing and pulling. ... Because disc brakes last longer than drum brakes, you should consider how things like rust might impact your trailer over time. The Dacromet coating on these brakes offers great corrosion protection, even with frequent use in freshwater and saltwater. It can withstand 300 to 400 hours of continual exposure to salt spray before corrosion begins, which is comparable to galvanized steel.
Trailer disc brake kit includes 2 assemblies with corrosion-resistant, Dacromet-plated rotors; calipers; and mounting brackets. Assemblies fit 3,500-lb axles and 14" and larger wheels. The 10" rotor features a 5 on 4-1/2 bolt pattern.Features: Brake assemblies make it easy to change from an idler axle to a disc brake axle Disc brakes deliver better performance than drum brakes More consistent stopping, even at highway speeds Dramatically shorter stopping distance Maintenance costs are lower than for drum brakes Fewer moving parts to maintain, repair and replace Dacromet coating provides superior corrosion resistance for freshwater or saltwater use 300- to 400-Hour salt-spray rating Slip-on, cast iron, over-the-hub rotors Fit over standard idler hub and are held in place by wheel and wheel bolts Remove easily for maintenance No need to replace entire hub-and-rotor assembly if only hub or rotor becomes damaged Increase distance from hub face to hub face by 1/2" Prevent heat-related damage with vented design that effectively dissipates heat Cast iron calipers are self-adjusting for smooth, equal braking Cast iron construction does not flex like aluminum Low-drag design retracts piston farther than other calipers for a cooler-running brake Stainless steel piston is 2-1/4" in diameter - 30 percent larger than other brands More braking torque than the competition High-performance, ceramic brake pads Ductile iron mounting brackets provide strength and durability Side-support design ensures that load is placed on bracket, not bolts Extra embossing for additional thread contact ensures tight, secure mounting for caliper guide bolts 4-Bolt brake flange mounting configuration - weld-on flange sold separately Kit includes 2 full brake assemblies 2 Dacromet-plated, cast iron rotors 2 Dacromet-plated, cast iron calipers 2 Dacromet-plated, ductile iron caliper-mounting brackets 4 Stainless steel caliper-mounting bolts Hydraulic brake actuator and lines (sold separately) are required for brakes to be activated Requires psi rating of at least 1,500 Specs: Fits: Axle capacity: 3,500 lbs #84 Spindle Wheel size: 14" and larger Bolt pattern: 5 on 4-1/2" Overall rotor diameter: 10-7/8" Brake flange configuration: 4 bolt 3-Year warranty Disc Brakes More and more people are switching their trailers over to disc brakes, and with good reason.
Kodiak's hub-and-rotor assembly makes it easy to change from drum brakes to disc brakes. Made of machined cast iron with dacromet plating, this 1-piece unit is balanced for a smooth ride and furnished with standard races.Features: Single-piece assembly makes installation a snap, whether you're retrofitting or switching from drum brakes Machined process minimizes runout and warping Contaminants can't get in between rotor and hub Balanced unit provides smooth ride Vented design effectively dissipates heat, preventing heat-related damage 1/2" Wheel studs and industry-standard races are included Cast iron construction ensures a favorable friction coefficient for necessary stopping power Dacromet plating provides superior corrosion resistance for freshwater or saltwater use 300- to 400-Hour salt-spray rating Specs: Fits: Axle capacity: 3,500 lbs Wheel size: 13" and larger Bolt pattern: 5 on 4-1/2" Wheel bolt diameter: 1/2" Outer diameter: 10" 3-Year warranty Bearing, Race and Seal Information Bearings (sold separately) Inner bearing: L68149 Outer bearing: L44649 Races (included) Inner race: L68111 Outer race: L44610 Seal: RG06-050 (sold separately) Inner diameter: 1.719" Outer diameter: 2.565" Disc Brakes More and more people are switching their trailers over to disc brakes, and with good reason.
Filters
