Get more visibility out back without adding a cluster of separate lights. This slim 15" bar combines your stop, turn, tail, and backup lights, while the smoke lens keeps a low-key blacked-out look when the lights are off.Highlights Four Functions in One Light Bar: Stop, turn, tail, and back-up lighting share one 15" fixture. Black-Out Look When Off: Smoke lens keeps the light bar dark until the red or white LEDs illuminate.
Replaces mid-torque motor with brake for In-Wall RV slide-out system. This motor is easy to install in the side wall and will extend and retract your slide-out with ease.Specs: Diameter: 42 mm Mid Torque 0.276 D-CUT Features: Replaces the motor in your In-Wall RV slide-out Extends and retracts slide-out with ease No assembly required and easily installs inside the side wall For use on LCI In-Wall slide-outs only Includes 1 motor with brake Made in the USA
Replaces the controller for your Lippert SlimRack (366697) in-wall slide out. Parking brake input required. If your slide-out requires no parking brake input, LC68ED (sold separately) is the correct controller.Features: Replaces the controller for your Lippert SlimRack (366697) in-wall slide out. Parking brake input required Fits: Part number 366697 , Lippert SlimRack slide-out Note: If your slide-out does not require parking brake input, LC68ED (sold separately) is the correct controller.
Replaces the controller for your Lippert SlimRack (366697) in-wall slide out. No parking brake input required. If your slide-out requires parking brake input, LC48ED (sold separately) is the correct controller.Features: Replaces the controller for your Lippert SlimRack (366697) in-wall slide out. No parking brake input required Fits: Part number 366697 , Lippert SlimRack slide-out Note: If your slide-out requires parking brake input, LC48ED (sold separately) is the correct controller.
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brakelight. Mounts to the surface of the trailer with the built-in flange, and hardwires to trailer.Features: Halo tail light is bright and easy to see, day or night Outer band functions as tail light Center flashes for turn signal Both brightens for brakelight Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Surface mount with built-in flange Hardware not included 3-Wire pigtail hardwires into trailer Black wire for tail light Red wire for brake and turn signal White wire for ground DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Overall dimensions: 7-1/2" wide x 3-5/16" tall x 1-1/8" thick Light face dimensions: 6-7/16" wide x 2-5/16" tall x 15/16" thick Light extends 3/4" out from trailer Diodes: 22 Power draw at 12.8 volts: Tail light: 0.295 amps Brake/turn signal light: 0.59 amps Lifetime warranty on LEDs
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer ring is a tail light and the center is a turn signal and brakelight. Mounts with built-in flange. Designed with weathertight connector.Features: Halo tail light is bright and easy to see, day or night Outer ring glows for tail light Center flashes for turn signal and brightens for brakelight Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Recessed mount with built-in flange Hardware not included Weatherproof connector Requires adapter (AL45PWTB - sold separately) to work with 3-prong plugs DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Overall dimensions: 5-1/2" diameter x 1-1/2" thick Light face diameter: 4-5/16" Requires 4-1/2" cutout Diodes: 21 Power draw at 12.8 volts: Tail light: 0.145 amps Stop/turn light: 0.375 amps Lifetime warranty on LEDs Weathertight Wiring Connection This GloLight has a weathertight plug that's designed to block out moisture.
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brakelight. Mounts in a cutout using a grommet (sold separately) and has a weathertight connector.Features: Halo tail light is bright and easy to see, day or night Outer band glows for a tail light Center flashes for turn signal Both brighten for brakelight Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Recessed mount with grommet (A70GB - sold separately) Optional mounting bracket: BK70BB (sold separately) Weatherproof connector requires adapter (AL45PWTB - sold separately) to work with 3-prong plugs DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Dimensions: 6-7/16" wide x 2-5/16" tall x 15/16" thick Diodes: 22 Power draw at 12.8 volts: Tail light: 0.295 amps Stop/turn light: 0.59 amps Lifetime warranty on LEDs Weathertight Wiring Connection This GloLight has a weathertight plug that's designed to block out moisture and protect your wiring.
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer ring is a tail light and the center is a turn signal and brakelight. Mounts in cutout with grommet (sold separately). Designed with weathertight connector.Features: Halo tail light is bright and easy to see, day or night Outer ring glows for tail light Center flashes for turn signal, brightens for brakelight Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and tinted acrylic lens Weatherproof connector Requires adapter (AL45PWTB - sold separately) to work with 3-prong plugs Recessed mount with grommet (A45GB - sold separately) Optional mounting bracket: BK45BB (sold separately) DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Dimensions: 4-5/16" diameter x 2-3/16" thick Light face diameter: 4" Diodes: 21 Power draw at 12.8 volts: Tail light: 0.145 amps Stop/turn light: 0.375 amps Lifetime warranty on LEDs What Wiring Do I Need?
This GloLight transit tail light is bright, easy to see, and just looks cool. It seals out moisture with the weathertight gasket. Mounts on the surface of your vehicle with screws (not included). ... Features: Halo tail light is bright and easy to see, day or night Inner ring glows for tail light Outer ring flashes for turn signal and brightens for brakelight Weather resistant Included gasket creates weathertight seal Built-in reflex reflector White LEDs with red lens More efficient and durable than incandescent bulbs Durable polycarbonate housing and acrylic lens Surface mount Hardware not included AMP-style plug DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Dimensions: 7" wide x 7" tall x 1-5/8" thick Compatible with 12V DC systems Diodes: 32 Power draw at 12V: Tail: 0.135 amps Stop/turn: 0.340 amps Lifetime warranty on LEDs
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brakelight. Mounts with the built-in flange. Designed with a weathertight connector.Features: Halo tail light is bright and easy to see, day or night Outer band functions as tail light Center flashes for turn signal Both brighten for brakelight Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Recessed mount with built-in flange Hardware not included Weatherproof connector Requires adapter (AL45PWTB - sold separately) to work with 3-prong plugs DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Overall dimensions: 7-1/2" wide x 3-5/16" tall x 1-5/16" thick Light face dimensions: 6-7/16" wide x 2-5/16" tall x 11/16" thick Diodes: 22 Power draw at 12.8 volts: Tail light: 0.295 amps Stop/turn light: 0.59 amps Lifetime warranty on LEDs Weathertight Wiring Connection This GloLight has a weathertight plug that's designed to block out moisture.
This red and white GloLight is bright, easy to see, waterproof, and just looks cool. The outer ring is a tail light and the center is a turn signal/brakelight. Mounts in cutout with grommet (sold separately). Designed with weathertight connector.Features: Halo tail light is bright and easy to see, day or night Outer ring glows for tail light Center flashes for turn signal Both brighten for brakelight Waterproof - great for boat trailers White LEDs with red and clear lens More efficient and durable than incandescent bulbs Polycarbonate housing and tinted acrylic lens Weatherproof connector Requires adapter (AL45PWTB - sold separately) to work with 3-prong plugs Recessed mount with grommet (A45GB - sold separately) Optional mounting bracket: BK45BB (sold separately) DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Dimensions: 4-5/16" diameter x 2-3/16" thick Light face diameter: 4" Diodes: 21 Power draw at 12.8 volts: Tail light: 0.145 amps Stop/turn light: 0.375 amps Lifetime warranty on LEDs Weathertight Wiring Connection This GloLight has a weathertight plug that's designed to block out moisture.
6-1/2" Waterproof light displays brake, tail, and turn signals on your trailer. Mounts in a cutout with a grommet (sold separately). The weathertight connector blocks out moistureFeatures: Oval brake, tail, and turn signal light Glows for tail light Brightens for brakelight Flashes for turn signal Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Recessed mounting with grommet (A70GB - sold separately) Optional mounting bracket: BK70BB (sold separately) Weatherproof connector hardwires to trailer with pigtail harness (A45PMB - sold separately) Requires adapter (AL45PWTB - sold separately) to work with 3-prong plugs DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Dimensions: 6-1/2" long x 2-1/4" tall x 1-3/4" thick Compatible with 12V DC systems Diodes: 6 Power draw at 12.8 volts: Stop/turn signal light: 0.161 amps Tail light: 0.007 amps Lifetime warranty on LEDs Weathertight Wiring Connection This light has a weathertight plug that's designed to block out moisture and protect your wiring.
4" Waterproof light displays brake, tail, and turn signals on your trailer. It mounts with the built-in flange and has a weathertight connector.Features: Round brake, tail, and turn signal light Glows for tail light Brightens for brakelight Flashes for turn signal Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Recessed mount with built-in black flange Hardware not included Weatherproof connector Requires adapter (AL45PWTB - sold separately) to work with 3-prong plugs DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Dimensions with flange: 5-1/2" diameter x 1-15/16" thick Light face: 4" diameter Distance between mounting holes (center on center): 4-1/4" Compatible with 12V DC systems Diodes: 10 Power draw at 12.8V: Stop/turn: 0.413 amps Tail: 0.026 amps Lifetime warranty on LEDs Weathertight Wiring Connection This trailer light has a weathertight plug that's designed to block out moisture.
Highlights Sleek: The smoke lens and dark housing on this light help it blend right into your black trailer or vehicle. 3-Function light: Displays tail, brake, and turn signals. Low profile: This light fits in tight spaces and sits almost flush.
7" LED brake, tail, and turn signal light seals out moisture with the included weathertight gasket. Mounts on the surface of your truck or bus with screws (not included) and plugs in with bullet connectors and a ground wire.Features: Round brake, tail, and turn signal light Weather resistant Included gasket creates weathertight seal White LEDs with red lens More efficient and durable than incandescent bulbs Potted circuit board for additional protection Sealed polycarbonate lens and housing (2) 0.180 Male bullet connectors plug into your vehicle's matching connectors Ring terminal included for ground Specs: Overall dimensions: 7" diameter x 1-1/2" thick Diodes: 17 Limited lifetime warranty
4" Waterproof light displays brake, tail, and turn signals on your trailer. It mounts in a cutout with a grommet (sold separately) and has a weathertight connector.Features: Round brake, tail, and turn signal light Glows for tail light Brightens for brakelight Flashes for turn signal Waterproof - great for boat trailers Single LED with red lens More efficient and durable than incandescent bulbs Weatherproof connector Requires adapter (AL45PWTB - sold separately) to work with 3-prong plugs Polycarbonate lens and housing Recessed mounting with grommet (A45GB - sold separately) Optional mounting bracket: BK45BB (sold separately) DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Dimensions: 4-1/8" diameter x 1-3/4" thick Diodes: 1 Power draw at 12.8V: Stop/turn: 0.25 amps Tail: 0.007 amps Warranty: Lifetime on LEDs 3-Year on housing and lens Weathertight Wiring Connection This light has a weathertight plug that's designed to block out moisture and protect your wiring.
4-1/4" Waterproof light displays brake, tail, and turn signals on your trailer. It mounts in a cutout with the built-in flange and has a weathertight plug.Features: Round brake, tail, and turn signal light Glows for tail light Brightens for brakelight Flashes for turn signal Waterproof - great for boat trailers Single LED with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Recessed mounting with built-in black flange Hardware not included Weatherproof connector Requires adapter (AL45PWTB - sold separately) to work with 3-prong plugs DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Dimensions with flange: 5-1/2" diameter x 1-11/16" thick Diameter of light face: 4-1/4" Diodes: 1 Power draw at 12.8 volts: Stop/turn signal light: 0.25 amps Tail light: 0.007 amps Warranty: Lifetime on LEDs 3-Year limited on housing Weathertight Wiring Connection This light has a weathertight plug that's designed to block out moisture and protect your wiring.
4-5/16" Waterproof light displays brake, tail, and turn signals on your trailer. Mounts in a cutout with a grommet (sold separately) and designed with a weathertight connector.Features: Round brake, tail, and turn signal light Glows for tail light Brightens for brakelight Flashes for turn signal Waterproof - great for boat trailers LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Recessed mounting with grommet (A45GB - sold separately) Optional mounting bracket: BK45BB (sold separately) Weathertight connector Requires adapter (AL45PWTB - sold separately) to work with 3-prong plugs DOT compliant Specs: Dimensions: 4-5/16" diameter x 1-13/16" thick Light fits into a 4-1/2" diameter Diodes: 7 Power draw at 12.8 volts: Stop/turn signal light: 0.234 amps Tail light: 0.033 amps Warranty: Lifetime on LEDs 3-Year limited on housing Weathertight Wiring Connection This trailer light has a weathertight plug that's designed to block out moisture.
6-1/2" Waterproof light displays brake, tail, and turn signals on your trailer. It mounts in a cutout with a grommet (sold separately) and has a weathertight connector.Features: Oval brake, tail, and turn signal light Glows for tail light Brightens for brakelight Flashes for turn signal Waterproof - great for boat trailers Single white LED with red lens More efficient and durable than incandescent bulbs Weathertight connector Requires adapter (AL45PWTB - sold separately) to work with 3-prong plugs Polycarbonate lens and housing Recessed mounting with grommet (A70GB - sold separately) Optional mounting bracket: BK70BB (sold separately) DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Dimensions: 6-1/2" long x 2-5/16" tall x 2-3/8" thick Diodes: 1 Power draw at 12.8 volts: Stop light: 0.26 amps Turn signal light: 0.011 amps Lifetime warranty on LEDs Weathertight Wiring Connection This light has a weathertight plug that's designed to block out moisture and protect your wiring.
4-5/16" Waterproof light displays brake, tail, and turn signals on your trailer. Mounts in a cutout with a grommet (sold separately) and designed with a weathertight connector. ... Features: Round brake, tail, and turn signal light Glows for tail light Brightens for brakelight Flashes for turn signals Waterproof - great for boat trailers LEDs with red lens More efficient and durable than incandescent bulbs Weatherproof connector Requires adapter (AL45PWTB - sold separately) to work with 3-prong plugs Polycarbonate lens and housing Recessed mounting with grommet (A45GB - sold separately) Optional mounting bracket: BK45BB (sold separately) DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Dimensions: 4-5/16" diameter x 1-5/8" thick Diodes: 4 Power draw at 12.8 volts: Stop/turn signal light: 0.16 amps Tail light: 0.008 amps Lifetime warranty on LEDs Weathertight Wiring Connection This trailer light has a weathertight plug that's designed to block out moisture.
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brakelight. Mounts with the built-in flange and comes with a 3-prong plug for quick installation.Features: Halo tail light is bright and easy to see, day or night Outer band glows for tail light Center flashes for turn signal Both brighten for brakelight Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and tinted acrylic lens Recessed mount with built-in flange Hardware not included 3-Prong plug connects to trailer DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Overall dimensions: 7-1/2" wide x 3-5/16" tall x 1-1/8" thick Light face dimensions: 6-7/16" wide x 2-5/16" tall x 15/16" thick Light extends 3/4" from trailer Diodes: 22 Power draw at 12.8 volts: Tail light: 0.295 amps Stop/turn light: 0.59 amps Lifetime warranty on LEDs What Wiring Do I Need?
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer ring is a tail light and the center is a turn signal and brakelight. Mounts with built-in flange and works with 3-prong plugs.Features: Halo tail light is bright and easy to see, day or night Outer ring glows for tail light Center flashes for turn signal and brightens for brakelight Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and tinted acrylic lens Surface mount with built-in flange Hardware not included PL-3 connector works with 3-prong plug (A45PB or A47PB - sold separately) DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Overall dimensions: 5-1/2" diameter x 1-1/2" thick Light face diameter: 4" Requires 4-1/2" hole in trailer for flange to sit flush Diodes: 21 Power draw at 12.8 volts: Tail light: 0.145 amps Stop/turn light: 0.375 amps Lifetime warranty on LEDs What Wiring Do I Need?
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a parking light and the center LEDs are a turn signal and brakelight. Mounts in a cutout using a grommet (sold separately) and works with 3-prong plugs.Features: Halo tail light is bright and easy to see, day or night Outer band glows for tail light Center flashes for turn signal Both brighten for brakelight Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Recessed mount with grommet (A70GB - sold separately) Optional mounting bracket: BK70BB (sold separately) PL-3 connector works with 3-prong plug (A45PB or A47PB - sold separately) DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Dimensions: 6-7/16" wide x 2-5/16" tall x 15/16" thick Diodes: 22 Power draw at 12.8 volts: Tail light: 0.295 amps Stop/turn light: 0.59 amps Lifetime warranty on LEDs What Wiring Do I Need?
This red and white GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brakelight. Mounts in a cutout using a grommet (sold separately). Works with 3-prong plugs.Features: Halo tail light is bright and easy to see, day or night Outer band glows for tail light Center flashes for turn signal Both brighten for brakelight Waterproof - great for boat trailers White LEDs with red and clear lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Recessed mount with grommet (A70GB - sold separately) Optional mounting bracket: BK70BB (sold separately) PL-3 connector works with standard 3-prong plug (A45PB or A47PB - sold separately) DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Dimensions: 6-7/16" wide x 2-5/16" tall x 15/16" thick Compatible with 12V DC systems Diodes: 22 Power draw at 12.8 volts: Tail light: 0.259 amps Brake and turn signal light: 0.59 amps Lifetime warranty on LEDs What Wiring Do I Need?