Powered A-frame jack automatically extends and retracts to your set height - no more holding a switch while the jack gets into position. Jack has 18" of screw travel. ... Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
... Great for boat or cargotrailers. Comes with footplate.Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargotrailers.Basically, by giving the jack a rougher "terrain," this finish helps keep the jack from aging too quickly. How to Determine the Lift Capacity You Need in a Jack A trailerjack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargotrailers.How to Determine the Lift Capacity You Need in a Jack A trailerjack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle. Usually, your tongue weight is about 10-15% of your gross trailer weight (GTW).
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargotrailers.How to Determine the Lift Capacity You Need in a Jack A trailerjack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle. Usually, your tongue weight is about 10-15% of your gross trailer weight (GTW).
It's usually a guess if the tongue weight is right, but with this jack, you don't have to. You press the switch, the trailer drops, and the number shows up while you're standing right there. One glance, and you know you're good to go.No digging for tools or dealing with slow motors. Just lift and go. Strong, Stable, and Built to Tow This jack is rated to lift up to 3,500 lbs, making it a solid fit for campers, cargotrailers, and everyday haulers. The wide footplate adds ground support, helping to keep the jack steady and preventing it from sinking into soft gravel or dirt.
Black powder coated A-frame jack has a retracted height of 8-1/4" and an extended height of 22-1/2". The zinc-finished topwind handle arm has a bolt-head fastener to keep it secure during operation.Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
Powered A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 10-3/4", an extended height of 28-3/4", and 18" of travel. ... Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 5,000 lbs. It has 18" of travel and a 5" drop leg for extra lift. ... Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
Just pull the easy-to-access pin on this jack to drop the entire jack tube down for quick, easy adjustment. No drop leg needed. Seven height settings offer up to 12" of drop. ... Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
This fast electric A-frame jack has a durable, super-efficient ball screw and a memory function for fast, easy setup. Offers 26" of total lift. Extends 6" in 18.4 seconds with 1,000 lbs of tongue weight.Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
Use this electric tongue jack to lift your trailer with the flip of a switch. The steel jack has 19" of travel and a 5" drop leg for extra lift. Extends 6" in 32.2 seconds with 1,000 lbs of tongue weight.Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 4,500 lbs. It has 18" of travel and a 5" drop leg for extra lift. ... Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
Say goodbye to annoying cranking! This smooth and powerful 8K hydraulic jack does all the hard work for you. Plus, it comes with everything you need. Easy, bolt on installation and you won't break a sweat next time you are hooking up!Features: Heavy-duty capacity and versatility Great for cargo, livestock, or heavy equipment trailers that are either bumper pull or gooseneck Complete installation package included Includes hardware, mounting brackets, hydraulic lines, fittings, battery cable, and breaker Requires only 3 quarts of ATF Dexron III (not included) for operation Easy to use and worry-free operation Weatherproof control box with a keyed lockout operates with the push of a button to extend and retract Manual override for power-free operation 12 volt battery source is required (not included) Pump can be mounted remotely with longer hoses (not included) to fit your needs Black gloss powder-coated finish keeps everything protected and looking good Made in the USA Specs: Lift capacity: 8,000 lbs Working pressure load: 2,500 psi Reservoir capacity: 98 oz Adjustable mounting brackets: 3-5/8" to 5-1/2" wide Mounting tabs: 1-3/4" wide x 4" long Foot pad: 7" long x 7" wide Warranty: 2 years on cylinder
Electric jack lets you raise and lower your A-frame trailer quickly and easily. Auxiliary power cord (sold separately) lets you power the jack directly from the 7-way on your vehicle. ... Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
Great for construction and agricultural trailers, this jack includes a heavy-duty, versatile mount that lets you easily install it and also keeps the jack up and out of the way when it's not in use.Features: Heavy-Duty Use: Built for trailers that tow construction equipment, agricultural machinery, and other heavy cargo Strong, Durable Mount: Innovative, heavy-duty bracket gives excellent support for a side-mount jack Bracket also makes it easy to remove the jack and remount it out of the way for travel Extended Lift: Drop leg pairs with the already substantial travel to get your trailer raised Strudy and Dependable: Solid steel construction Made in the USA and designed by US Military Veteran Specs: Height (from bottom of foot to top of jack): 24-3/4" Retracted 40-1/8" Extended Total lift: 28" Screw travel: 15" Drop leg travel: 13" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Limited lifetime warranty
Use this electric tongue jack to lift your trailer with the flip of a switch. The steel jack has 19" of travel and a 5" drop leg for extra lift. Extends 6" in 32.2 seconds with 1,000 lbs of tongue weight.Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
Electric jack lets you raise and lower your A-frame trailer quickly and easily. Auxiliary power cord allows you to power the jack directly from the 7-way on your tow vehicle. ... Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
1,000 lb Sidewind A-frame JackSome jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well.
Black powder coated A-frame jack has a topwind handle arm and a bolt-head fastener to keep it secure during operation. Footplate or caster sold separately.Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
Dutton-Lainson sidewind swivel jack with a 6" dual wheel can be a real back saver when hitching and unhitching loaded trailers.Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
This Dutton-Lainson sidewind swivel jack is a back saver when hitching and unhitching loaded trailers. The heavy-duty D-L tongue jack reduces the effort required to maneuver a trailer into hitching position or to remove the trailer from a vehicle.Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
This super-fast electric A-frame jack has a durable, efficient ball screw and a memory function for easy setup. Offers 18" of travel and 4-1/2" of extension with the drop leg. ... Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
Filters
