Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
We've seen this issue before on your Atwood RV Carbon Monoxide and Propane Gas Detector #AT36681 and the beeping every 40 seconds indicates "a fault has been detected that compromises some detector function." What you need to do is use…
view full answer...We do have some LP gas detectors available, but none would be a direct replacement for your CCI 7770.2 / Pre Tell 22. From what I could find on your CCI 7770.2 / Pre Tell 22, it has dimensions of 6.25" wide x 3.9" tall. The RV Propane Gas…
view full answer...Let's do some troubleshooting. First, let's check the 7-way trailer connector on your truck using a circuit tester like #PTW2993. We will check each pin for function one by one. I've attached a photo to assist. If your 7-way is not…
view full answer...The Curt Flat Plate Gooseneck #C65500 is a multi-fit application that can be used on a cab and chassis truck. Typically, the plate would be placed on top of the flat bed over the rear axle. The Universal Rail Kit, part #C61502 can be used to provide…
view full answer...I am not able to look up parts number for AL-KO axles as they are no longer in business but I can see it has a 2,100 lb weight capacity which means it will likely use L44649 bearings. Therefore, the correct bearing kit should be the Bearing Kit part…
view full answer...Hey Dave, what you gave me is enough info to get you replacement bearings. The grease seal 471750 matches the part #TMK48ZR. For a Timken replacement for the L44610 part number you'd need #TMK63VR. Then for a bearing for the L44649 you'd want…
view full answer...The key for selecting a replacement grease seal is the reference number, in this case #10-9. The manufacturer code does not matter. This is a single-lip seal with an inner diameter of 1.500-inches and an outer diameter of 1.987-inches. It is…
view full answer...The correct hubs for the 4400 Lb Lippert Axle NV178936 are 3,500 lb hubs as confirmed by Lippert. If you need to replace the hubs, I recommend Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased part…
view full answer...In the spring mount style of puck light the closest option we have is the part #DG52445VP that you referenced but would require you to slightly open up the holes in your ceiling if what you have is 2-3/4 inches in diameter as this needs a 3 inch…
view full answer...Since your existing cut out is 3 inches in diameter you can absolutely use the 12V RV LED Puck Light #DG52445VP. While the #DG52445VP has an overall diameter of 3-1/8 inches, the cut out size needed is just 3 inches, as any hole larger than that…
view full answer...What you have appears to be a standard puck light which you could use the part #277-000343 as a replacement for if it's 3 inch in diameter like it looks like. We also have 4-1/2 inch size like part #277-000344 but it does look to me like you have…
view full answer...The gear that you're talking about on your MaxxFan 4401K is the operator mechanism. For a replacement you need the #MA10-20281K-1AF.
view full answer...Filters
- 14 results