Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
You will most likely need to use a 1,000LB spring like either the Double-Eye Spring 26" #e77SR or 20-3/8" #e53SR. It is important to match the springs as close as possible to the weight of the trailer and the cargo without exceeding the…
view full answer...You could potentially replace your leaf springs with a larger capacity spring but will need to match the length of your current leaf springs to avoid having to remove and reinstall the hangers and rest of the suspension system, which is a giant…
view full answer...Yes, you can connect the camera from the Voyager WiSight 2.0 Wireless Backup Camera System #ASA37YR to a constant 12V power wire so it isn't tied to the running light circuit of your setup. You can either find a pre-existing circuit or run your…
view full answer...Yes, you can utilize her current 4-way adapter and then add the 10 gauge wire and 40 amp circuit breaker to give her a 7-way with the functions she needs. You can get everything you need in the #ETBC7 wiring kit. I've attached an article and a…
view full answer...I may have a solution for you on this, but the short answer to this is- no. Stabilizer jacks and auto-leveling systems have two fairly different functions and the PSX2 system is not going to be able to function as an auto-leveling system with any…
view full answer...There is an easier solution that a different jack. You can use a longer ball mount so that the trailer, and the jack, will be further away allowing you to lower the tail gate without hitting the jack. Then you could use any jack you wanted. If that…
view full answer...It is possible to mount a rooftop cargo box like the Yakima SkyBox 12 #Y07334 on top of a roof-rack-mounted cargo basket like the Rhino-Rack #RMCB02. There are a few things to keep in mind as you prepare to do this. Your vehicle will have a finite…
view full answer...If you already have a seal that you're replacing then you want to get a seal that's a similar size, otherwise if it's a brand new application then I recommend trying to find the depth of the gap and choosing a seal slightly taller since…
view full answer...I do have an option for you but I would not be able to advise on using the Folding Bumper Mounted Tire Carrier part #TR-2 outside of its intended purpose which is to be mounted to a square 4 x 4 bumper on the rear of a trailer. I also do not have any…
view full answer...I do have options for you. We have the Optronics #STL78RPG, which is essentially the Optronics LED Trailer Tail Light #STL78RB with a 3 prong attached. We also have the GloLight LED Trailer Tail Light #STL178RFPB. This light is identical in size to…
view full answer...A single spare tire mounted in your trailer will not have too much effect on tongue weight but if your application means installing multiple E-Track spare tire holders #RA-16HST then you will want to try to distribute the load evenly if possible. For…
view full answer...Mounting a spare tire carrier, like #413200 to the outside of an enclosed trailer can be done. You will just want to be absolutely sure the carrier and the tire are both secure. I would secure it by adding braces on the inside of the trailer going…
view full answer...Filters
250 results
Vehicle Fit
Fit 2005 Pontiac GTO