Replacement Access Hatch for RVs - 5" - Black

Video Transcript for Review of JR Products RV Doors - Access Doors - 37231035

Today we're going to take a look at the JR Products 5" access hatch for RVs. Now this will replace the 5" access hatch on your RV. Now the mounting hole pattern will usually match most original hatch rings. This will provide access to your plumbing, your electrical, your cargo areas and even your hose compartments.Once you unscrew the center lid, there, you can gain access. Does use a nice waterproof seal on here. It'll prevent leakage.

So in other words, when you put your lid back in there and tighten it down, that'll seal it. These are UV and impact resistant. You can see it's a nice black color.Few specs on this. The overall diameter, including the mounting flange, edge to edge, is going to be right at 6-11/16". The mounting hole dimensions, you can see there's six mounting holes, so if we measure from the center of one directly across to the center of the one right across from it, it's going to be right at 6-1/8".

The cutout diameter, which is this portion in the back here that would be cut out for this to be installed, the hole size would be 5-7/16". And then, of course, if we remove the center lid, the actual hatch opening diameter on the inside is right at 5".But that should do it for the review on the JR Products 5" access hatch for RVs.