How to Choose Best Thickness for Ramp Door Seal Kit

Question

Question:

Any tips on picking the right thickness enclosed trailer ramp rood seal?

asked by: Samuel C

0

Expert Reply:

If you already have a seal that you're replacing then you want to get a seal that's a similar size, otherwise if it's a brand new application then I recommend trying to find the depth of the gap and choosing a seal slightly taller since it will compress as you close the door.

For example, the Ramp Gate Seal Kit for Enclosed Trailer Ramp # SR55FR measures 1" tall so a gap of about 7/8" would be perfect for this application.

expert reply by: Jon G

0

Answer 1

The Ramp Gate Seal Kit for Enclosed Trailer Ramp #SR35FR can be installed in either location. Personally, I would keep it off the ramp door since you're more likely to damage it as you walk or move things across the ramp. Inside the frame…

view full answer...

Answer 2

I have a solution for you but you will need to supply your own pipe to get your desired 33-1/4 inch size. The Universal cam-door lock with 1 inch keeper #383200 will allow you to create a bar lock assembly of 33-1/4 inches. With this item you supply…

view full answer...

Answer 3

The closest thing we have to a 2" x 2" bumper is the Rubber Bumper for Enclosed Trailer Ramp Door #37210715 you looked at. This has a 2-1/2" diameter with a height of 1" and a 3/8" mounting hole.

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 7

Hey Lars, welcome back! I can indeed confirm that the Furrion Variable Speed Chill Cube air conditioner with a heat pump is indeed really happening. They are currently available for order (02/04/26) and will be shipped out towards the middle of next…

view full answer...

Answer 8

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 9

That’s a great question Chadwick, and this is one of those situations where the change in technology really matters. The GE Appliances Low-Profile RV AC w/ Heat Pump part #GE26RR will replace your current ARC13AACBL2 setup, but it’s important to know…

view full answer...

Answer 10

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 11

Hey Tony! I'm going to save you a lot of trouble here. The Chill Cube Thermostat #LC74DX is absolutely terrible. We have had nothing but issues with this, and there has been endless back and forth with Furrion about it. Some people are able to…

view full answer...

How to Choose Best Thickness for Ramp Door Seal Kit

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching