BoatTrailerRoller Bunk Bracket for Dutton-Lainson Roller BunksFeatures: Roller bunk bracket, for mounting galvanized Roller Bunks models Fits: DL21740 (model #6387) and DL21741 (model #6388) Sold individually 4 Needed to mount a pair of roller bunks Die-formed of heavy gauge steel plate TUFFPLATE finish Measurement between slotted holes from center to center: 1-1/4" Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc plated trivalent chrome process and 30 percent greater corrosion resistance when compared to powder coated finish.
Dutton-Lainson roller bunk bracket for boattrailers.Features: Roller bunk bracket for mounting Dutton-Lainson standard roller bunks Fits: DL21754 (model 6345) and DL21755 (model 6355) Formed of heavy gauge steel plate TUFFPLATE finish Sold individually 4 Needed to mount a pair of roller bunks Specs: Overall length: 10-3/4" Overall width: 3" Inside width: 2-3/4" Slot length: 7-1/4" Slot width: 7/16" Slots center-to-center: 1-1/4" Top bracket to the start of the slots: 3" Top of bracket to the end of the slots: 10-3/8" Hook: 1-3/4" wide Hole diameter: 3/8" Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc plated trivalent chrome process and 30 percent greater corrosion resistance when compared to powder coated finish.
This one-piece panel bracket braces a 12" roller on your boattrailer to help you easily load and transport your boat. If features corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.Features: Panel bracket supports a 12" roller on your boattrailer Bolts to your trailer's frame Mounting hardware not included Sturdy, 11-gauge galvanized steel construction resists corrosion 6 Gussets provide extra strength by stiffening the bends Slotted mounting holes allow you to adjust the position during installation Made in the USA Specs: Quantity: 1 bracket Application: 12" rollers Accepts a 13" long x 5/8" diameter roller shaft Dimensions of mounting slots (each): 1/2" wide x 5" tall Spacing of mounting slots: 10" apart on center Typically installed upright on the crossmembers of a boattrailer, panel brackets hold keel and spool rollers that help to keep the boat moving while it is being loaded and to stabilize the keel.
This pair of L-shape brackets make it simple to mount a roller precisely where you need it on your boattrailer. Includes 2 corrosion-resistant brackets.Features: L-shape brackets accommodate a variety of different roller lengths Mount to your boattrailer's frame or tongue Sturdy, 7-gauge galvanized steel construction resists corrosion Made in the USA Specs: Application: 4", 5", 8", 10", 12" and 18" long rollers that take a 1/2" diameter shaft Diameter of mounting holes (each): 3/8" Quantity: 1 pair Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
This one-piece panel bracket braces an 8" roller on your boattrailer to help you easily load and transport your boat. If features corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.Features: Panel bracket supports an 8" roller on your boattrailer Bolts to your trailer's frame Mounting hardware not included Sturdy, 11-gauge galvanized steel construction resists corrosion 6 Gussets provide extra strength by stiffening the bends Slotted mounting holes allow you to adjust the position during installation Made in the USA Specs: Quantity: 1 bracket Application: 8" rollers Accepts an 8-7/8" long x 5/8" diameter roller shaft Overall dimensions: 8-1/8" long x 7-3/4" wide x 3-1/2" tall Dimensions of mounting slots (each): 1/2" wide x 5" tall Spacing of mounting slots: 6" apart on center Typically installed upright on the crossmembers of a boattrailer, panel brackets hold keel and spool rollers that help to keep the boat moving while it is being loaded and to stabilize the keel.
This one-piece panel bracket braces a 10" roller on your boattrailer to help you easily load and transport your boat. If features corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.Features: Panel bracket supports a 10" roller on your boattrailer Bolts to your trailer's frame Mounting hardware not included Sturdy, 11-gauge galvanized steel construction resists corrosion 6 Gussets provide extra strength by stiffening the bends Slotted mounting holes allow you to adjust the position during installation Made in the USA Specs: Quantity: 1 bracket Application: 10" rollers Accepts an 10" long x 5/8" diameter roller shaft Dimensions of mounting slots (each): 1/2" wide x 5" tall Spacing of mounting slots: 8" apart on center Typically installed upright on the crossmembers of a boattrailer, panel brackets hold keel and spool rollers that help to keep the boat moving while it is being loaded and to stabilize the keel.
Universal RollerBrackets will accommodate any size roller length. Brackets feature a 5" slot, which allow vertical adjustment for stabilizing boat on trailer.
Universal RollerBrackets will accommodate any size roller length. Bracket features a 5" slot, which allows vertical adjustment for stabilizing boat on trailer.
Replace the standard rubber spool roller on your boattrailer with this thermoplastic rubber version from Yates. TPR material is stronger than rubber and softer than polyurethane, and it won't leave marks on your boat.Features: Replaces 1 spool roller on your boattrailer Fits a 4" wide bracket with a 5/8" diameter shaft Eases loading and unloading of boat Supports keel of boat as it sits on trailer Helps to absorb road shock while boat is being towed Constructed of thermal-plasticized rubber (TPR) Non-marking, non-scratching material Stronger and more durable than traditional rubber Softer and more pliant than polyurethane Made in the USA Specs: Overall length: 3-3/4" Overall diameter: 3" Outer diameter of center hole: 5/8"
Channel-style roller bunks upgrade your boattrailer's standard bunk boards, allowing for smooth loading and unloading and superior hull protection for your boat. ... Features: Channel-style roller bunks upgrade your boattrailer from standard bunk boards Ease boat loading and unloading - boat rolls smoothly over bunks Support hull during trailering Heavy-duty, black polypropylene rollers absorb road shock and protect hull from scratches Galvanized steel construction is sturdy and rust resistant Pre-assembled bunks easily install in either of 2 ways Mount to existing bunk boards (hardware not included) Attach to trailer frame with mounting brackets (CE10003G-4 - sold separately), allowing for height and angle adjustment Made in the USA Specs: Quantity: 2 bunks with 5 rollers each Weight capacity: 1,500 lbs Bunk length: 4' Roller dimensions: 4-3/4" wide x 2-1/2" diameter Channel width: 2-1/8" Top of roller to bottom of channel: 2-13/16" CE Smith's roller bunks convert your boattrailer's guide-ons from bunk board style to roller style.
Channel-style roller bunks upgrade your boattrailer's standard bunk boards, allowing for smooth loading and unloading and superior hull protection for your boat. ... Features: Channel-style roller bunks upgrade your boattrailer from standard bunk boards Ease boat loading and unloading - boat rolls smoothly over bunks Support hull during trailering Heavy-duty, black rubber rollers absorb road shock and protect hull from scratches 12 Gauge galvanized steel construction is sturdy and rust resistant Pre-assembled bunks easily install in either of 2 ways Mount to existing bunk boards (hardware not included) Attach to trailer frame with swivel mounting brackets (CE10003G-4 - sold separately), allowing for height and angle adjustment Made in the USA Specs: Quantity: 2 bunks with 6 rollers each Weight capacity: 1,500 lbs Bunk length: 5' Roller dimensions: 4-3/4" wide x 2-1/2" diameter Channel width: 2-1/8" Top of roller to bottom of channel: 2-13/16" CE Smith's roller bunks convert your boattrailer's guide-ons from bunk board style to roller style.
D-L roller bunks provide a quick, easy, and inexpensive way to upgrade bunk-style trailers to rollers. Features rubber rollers with durable, wear-resistant inner surface and soft, boat-cushioning outer surface.Features: Rubber rollers Durable, wear-resistant inner surface Soft, boat-cushioning outer surface Universal mount attaches either vertically or horizontally Installation hardware not included Optional roller bunk bracket (sold separately) 12 Sets of 3 rollers Constructed of 12-gauge, galvanized steel Zinc-plated steel roller hardware included Made in the USA Specs: Bracket width: 1-7/8" Bracket depth: 1-7/8" Wheel-to-wheel width: 4-3/4" Capacity: 3,000 lbs Quantity: 2 roller bunks The deluxe style provides a universal mount that attaches directly to either vertically or horizontally positioned bunk boards and has 3 rollers per set.
Steep ramps can make launches tricky. Black rubber rollers strike the balance between smooth rolling and added grip, so your boat loads with control and stays put until youre ready to push off.Features to know about Smooth Rolling Instead of Dragging Would you rather push a box across the floor or move it with a dolly? That's the difference roller bunks make compared to carpeted ones. Each 5' bunk has six black rubber rollers that let your boat roll smoothly on and off your trailer.
Carpeted bunks wear out and drag against your hull. Amber polyvinyl rollers trade that drag for a smooth, easy glide, even in shallow water. Made to last a lifetime, they resist sun and water without marking your boat.That's the difference roller bunks make compared to carpeted ones. Each 5' bunk has six amber poly rollers that let your boat roll smoothly on and off your trailer.
Carpeted bunks wear out and drag against your hull. Amber polyvinyl rollers trade that drag for a smooth, easy glide, even in shallow water. Made to last a lifetime, they resist sun and water without marking your boat.That's the difference roller bunks make compared to carpeted ones. Each 4' bunk has five amber poly rollers that let your boat roll smoothly on and off your trailer.
Steep ramps can make launches tricky. Black rubber rollers strike the balance between smooth rolling and added grip, so your boat loads with control and stays put until youre ready to push off.Features to know about Smooth Rolling Instead of Dragging Would you rather push a box across the floor or move it with a dolly? That's the difference roller bunks make compared to carpeted ones. Each 4' bunk has five black rubber rollers that let your boat roll smoothly on and off your trailer.
These split rollerbrackets brace any size roller on your boattrailer. They come in handy in areas where a one-piece bracket will not fit. They feature corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.Features: Right- and left-hand brackets support a roller on your boattrailer Fit any length roller that has 5/8" diameter shaft Sturdy, 11-gauge, galvanized steel construction resists corrosion 6 Gussets provide extra strength by stiffening the bends Slotted mounting holes allow you to adjust the position during installation Made in the USA Specs: Quantity: 1 pair Application: 4", 5", 8", 10", 12" and 18" long rollers Requires 5/8" diameter roller shaft Dimensions of mounting slots (each): 1/2" wide x 5" tall These split panel brackets mount upright to a trailer's crossmember.
D-L roller bunks provide a quick, easy, and inexpensive way to upgrade bunk-style trailers to rollers.Features: Non-marking "2 compound" rollers Durable, wear-resistant inner surface Soft, boat-cushioning outer surface Universal mount attaches either vertically or horizontally Optional roller bunk bracket (sold separately) 10 Sets of 3 rollers Constructed of 12-gauge pre-galvanized steel Made in the USA Specs: Weight capacity: 2,500 lbs Roller assembly width: 4-7/16" Mounting bracket: 1-3/4" wide Mounting holes: 3/8" Quantity: 2 roller bunks
This roller assembly supports your boat's keel for easy loading and safe transport on your trailer. It features a 12-inch, black rubber keel roller and a galvanized steel panel bracket with slotted mounting holes for adjustability.Features: Deep V keel roller supports your boat's keel as it sits on the trailer Eases loading and unloading of boat Helps to absorb road shock while boat is being trailered Panel bracket lets you bolt roller assembly onto the front of your boattrailer Has slotted mounting holes that allow you to adjust the position during installation Requires 1/2" or 7/16" fasteners (not included) Sturdy, galvanized steel bracket resists corrosion 6 Gussets provide extra strength by stiffening the bends Black rubber roller delivers long-lasting performance Made in the USA Specs: Roller length: 12" Shaft diameter: 5/8" Dimensions of mounting slots (each): 1/2" wide x 5" tall Spacing of mounting slots: 10" apart on center Typically installed upright on the rear and middle crossmembers of a boattrailer, keel roller panel bracket assemblies help to keep the boat moving while it is being loaded and to stabilize the keel.
This roller assembly supports your boat's keel for easy loading and safe transport on your trailer. It features an 8-inch, black rubber keel roller and a galvanized steel panel bracket with slotted mounting holes for adjustability.Features: Deep V keel roller supports your boat's keel as it sits on the trailer Eases loading and unloading of boat Helps to absorb road shock while boat is being trailered Panel bracket lets you bolt roller assembly onto the front of your boattrailer Has slotted mounting holes that allow you to adjust the position during installation Requires 1/2" or 7/16" fasteners (not included) Sturdy, galvanized steel bracket resists corrosion 6 Gussets provide extra strength by stiffening the bends Black rubber roller delivers long-lasting performance Made in the USA Specs: Roller length: 8" Shaft diameter: 5/8" Dimensions of mounting slots (each): 1/2" wide x 5" tall Spacing of mounting slots: 6" apart on center Typically installed upright on the rear and middle crossmembers of a boattrailer, keel roller panel bracket assemblies help to keep the boat moving while it is being loaded and to stabilize the keel.
This roller assembly supports your boat's keel for easy loading and safe transport on your trailer. It features a 10-inch, black rubber keel roller and a galvanized steel panel bracket with slotted mounting holes for adjustability.Features: Deep V keel roller supports your boat's keel as it sits on the trailer Eases loading and unloading of boat Helps to absorb road shock while boat is being trailered Panel bracket lets you bolt roller assembly onto the front of your boattrailer Has slotted mounting holes that allow you to adjust the position during installation Requires 1/2" or 7/16" fasteners (not included) Sturdy, galvanized steel bracket resists corrosion 6 Gussets provide extra strength by stiffening the bends Black rubber roller delivers long-lasting performance Made in the USA Specs: Roller length: 9-1/4" Dimensions of mounting slots (each): 1/2" wide x 5" tall Spacing of mounting slots: 8" apart on center Typically installed upright on the rear and middle crossmembers of a boattrailer, keel roller panel bracket assemblies to keep the boat moving while it is being loaded and to stabilize the keel.
This roller assembly supports your boat's keel for easy loading and safe transport on your trailer. It features a 4-inch, black rubber spool roller and a galvanized steel bracket that attaches to your trailer's tongue.Features: Spool roller supports your boat's keel as it sits on the trailer Prevents the bow from making contact with your winch Eases loading and unloading of boat Helps to absorb road shock while boat is being traileredBracket lets you bolt roller assembly onto the tongue or frame of your boattrailer Offset base offers extra support Requires 7/16" fasteners (not included) Sturdy, 1/8" galvanized steel bracket resists corrosion Black rubber roller delivers long-lasting performance Made in the USA Specs: Roller length: 4" Shaft diameter: 5/8" Diameter of mounting holes (each): 1/2" Spacing of mounting holes: 2-1/2" apart on center Typically installed flat on the tongue of a boattrailer, this spool rollerbracket assembly stabilizes the keel of the boat during trailering.
This roller assembly supports your boat's keel for easy loading and safe transport on your trailer. It features a 4-inch, black rubber spool roller and a galvanized steel panel bracket with slotted mounting holes for adjustability.Features: Spool roller supports your boat's keel as it sits on the trailer Prevents the bow from making contact with your winch Eases loading and unloading of boat Helps to absorb road shock while boat is being trailered Panel bracket lets you bolt roller assembly onto the front of your boattrailer Has slotted mounting holes that allow you to adjust the position during installation Requires 1/2" or 7/16" fasteners (not included) Sturdy, galvanized steel bracket resists corrosion 6 Gussets provide extra strength by stiffening the bends Black rubber roller delivers long-lasting performance Made in the USA Specs: Roller length: 4" Shaft diameter: 5/8" Dimensions of mounting slots (each): 1/2" wide x 5" tall Spacing of mounting slots: 2" apart on center Typically installed upright on the front crossmember of a boattrailer, a spool roller panel bracket assembly helps to keep the boat moving while it is being loaded and to stabilize the keel.
Filters
