8-3/8" Long x 2-1/2" tall. Black molded bracket holds your trailer's standard size license plate. Built-in LED light illuminates plate. Mounts on surface of trailer - hardware included. 2-Wire pigtail.
4" Long x 1-9/16" tall x 2-5/8" deep. Incandescent trailer light illuminates your license plate. Black polycarbonate housing has a built-in bracket for surface-mount installation. 2-Wire pigtail with power and ground wires. Clear lens.
15-1/2" x 9-1/2" Rectangle. Black molded frame holds your trailer's standard size license plate. Built-in LED light illuminates plate. Mounts on surface of trailer - hardware included. 2-Wire pigtail.
8-5/8" x 3-1/4". LED trailer light with ABS mounting bracket illuminates your license plate. Durable polycarbonate lens and housing. Surface mount to trailer with bracket. 2-Wire design.
8-5/8" x 3-1/4" x 2-5/16". Waterproof trailer light illuminates your license plate. Durable ABS housing. Clear lens under polycarbonate housing. Surface mount on 3-1/2" centers with included bracket. 2-Wire design. 5 Diodes.
We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer…
Since your 2020 Acura RDX did not come with trailer wiring you are going to need the T-One Vehicle Wiring Harness #118804. Then you will be able to connect and pull your trailer with a Ball Mount #DT49MR. For your utility trailer if you are looking…
From the numbers you provided it sounds like you need replacement grease seals. In my research, the grease seals I found with the GS-1719DL number have a 1.72 inside diameter and 2.565 outside diameter. The replacement double lip grease seals you…
The closest bolt pattern we would offer to the 8 lug on 170mm bolt pattern you mentioned would be an 8 lug on 6-1/2 bolt pattern. 6-1/2 inches is 6.692 inches, which is close, but not exact. The Timbren Axle Less suspension system you mentioned, part…
The HD versions of the Timbren kits like the part #ASR2KHDS01 are more intended for off road type use like what you'd be using so this is the kit you'd want. The spindles are actually designed for use with 3,500 lb hub/drums instead for added…
I believe I have just the right license plate bracket for you. Take a look at the Trailer License Plate Mount Bracket, #LP15SB. It is just a little over 8 inches long at 8-7/16 inches. It is 4 inches tall. The center to center distance between the…
For your 3,000-pound compact John Deere tractor, I recommend the Gen-Y Hitch Aluminum Loading Ramp Set - 84" Long x 14" Wide - 6,000 lbs #325-GH-R84. Not only does this set provide you with 6,000 pound of maximum weight capacity, it also…
Two-wire LED clearance lights such as the Red #MCL32RB or the Amber #MCL44AB have one wire for the power lead and one ground wire. The wire that was attached to your old clearance lights will be spliced to the power wire of your new lights. The black…
While this light is designed as an exact replacement for a Grote #47853-5 or Optronics #MCL36AS, the Peterson #M170A will work to replace any shape or size clearance light, so it will work for you. You can mount it to your trailer using the included…
Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…
This license plate holder is made from durable, black molded plastic and measures 14-1/4" long x 8-5/16" wide x 13/16" deep. Two screws included secure the license plate to the holder. Generally used on enclosed cargo trailers.
8-5/8" x 3-1/4" x 1-15/16". Compact LED trailer light illuminates your license plate. Great White series features custom-cut lens optics and ultra-bright white diode. Surface mount to trailer with included bracket. 2-Wire design.
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. Winding handle included.
8-5/8" x 2-5/8" x 2-1/2". Trailer light illuminates your license plate. Durable ABS housing and polycarbonate lens. Surface mount with included bracket. 2-Wire pigtail.
Round trailer axle beam measures 95" from hub face to hub face (when hubs - sold separately - are mounted) and 80" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).
2-1/8" x 1-1/8" Rectangle. Waterproof, LED trailer light serves as either a side marker light or clearance light when properly mounted. Durable polycarbonate lens and housing. Stud mount to trailer. Single wire design. P2 rated.
7-9/16" x 3-5/16" Oval. 3-Function, waterproof LED light acts as brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design.
8-1/2" x 3". Heavy-duty license plate bracket works with stud-mount license plate lights and combination stop, tail, and license lights. Durable, powder-coated steel construction resists corrosion. Surface mount - hardware not included.
48" x 25" x 27" This lockable, weatherproof cargo carrier has a large lid for easy loading and unloading. The sturdy polyethylene box slides out on a steel base for access to rear of vehicle and has built-in LED tail lights.
6-7/16" x 2-1/8" Oval. Waterproof LED trailer tail light functions as a stop, tail, and turn signal light. Durable polycarbonate housing and lens. Recessed mount with grommet (sold separately). Accepts standard 3-prong plug (not included).
Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Stud mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.
This rigid plastic water tank lets you transport and dispense drinking water on your overland adventure. Shaped to fit in the footwells behind your front seats. Food-grade polyethylene tank is BPA-free. Uses 1/2" plastic fittings.
Multipurpose trailer lets you haul your jon boat, kayak, or personal watercraft. Adjustable bunks can be set front to back or side to side to hold different types of boats. 13' Long trailer with 12" wheels supports boats up to 14' long.
Single-stud tie-down lets you create an anchor point on your Tow-Rax L-track system. Simply slide anchor into slots along track. Max load is 4,000 lbs when used on a floor-mounted track and 2,000 lbs when used on a wall-mounted track.
Filter Results
