Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Bill, thanks for reaching out. I just went out to our warehouse and measured the Replacement Left/Curb Side Leg for etrailer and Ram Hydraulic Jack #e63VV. The outer tube is 4-1/2" square. The inner tube with the foot is 4".
view full answer...I would be happy to help narrow down the choices to the best hitch for your 2021 Ram 1500 Classic Warlock edition. Since your main purpose will be for accessories, I recommend the etrailer Hitch Receiver item #e98852. This hitch is custom fit and…
view full answer...While we do carry great extenders for your dually 2016 Ford F-350, we do not carry any extenders with a single inflation point that inflates both tires simultaneously. However, we do have a great option that involve easily-accessible valves for…
view full answer...If your highlander came with a factory trailer hitch and factory 7-way connector, then it is likely that it came with the tow package. If your vehicle did not come with a trailer hitch and 7-way trailer connector, it likely did not come with a tow…
view full answer...The Trailer Hub Assembly for 3,500 lb Axles, #84550BX, was confirmed by Dexter to be the assembly which replaced part 8-208, but please note that it does have a 5 on 5 bolt pattern, and you mentioned yours was a 5 on 4.5. To determine which bolt…
view full answer...Thank you for all of the info. The correct replacement bearings would be the part #TMK79FR and #TMK29FR which are both USA made Timken bearings.
view full answer...The correct grease/dust cap for a 1.95 inch trailer hub bore is the following: - Grease Cap #TRAG-DC-196 This has a flange diameter of 1.957 inches which is exactly what you'll need as they are meant to be ever so slightly larger for a tight fit…
view full answer...You simply measure between the tires about an inch off the ground to determine what Fastway chocks are the best fit for your application. We have the Fastway ONEstep Wheel Chock for Tandem-Axle Trailers and RVs - 16" to 24" Long…
view full answer...The Griot's Garage Heavy Duty Metal Polish Cream for Vehicles and RVs part #34911155 is your best option for aluminum exterior walls on a trailer. This is a cream type polishing compound which works great to restore the surface back to its…
view full answer...Measuring on the ground to the inside point of contact of each tire is correct. The Fastway ONEstep Wheel Chocks #FA84-00-4840 would be the right part for you, if your measured wheel spacing is between 16 and 24 inches on your dual-axle trailer.…
view full answer...The Fastway ONEstep Wheel Chocks for Tandem-Axle Trailers and RVs - 16" to 24" Long - Qty 2 Item #FA84-00-4840 has an adjustable length so you could use them on top of a block but the wheels would need to be level with each other for the…
view full answer...Hello Ken. I am not sure exactly how long your current U-bolts are, but you will probably be able to re use them. It just depends on how long they are and how much thread is left. Assuming your 4 leaf spring has 3/8" thick leaves it would be…
view full answer...