Replaces the motor for your Kwikee powered RV entry steps. Attaches to the linkage (sold separately) underneath step mounting plate to provide power for extension. ... Features: Replaces the motor for your Kwikee electric RV steps Includes the motor only Fits step series 25 Motor provides power to extend and retract your Kwikee steps Automatic shut-down feature retracts steps if they strike an obstacle during extension Simple installation onto linkage (sold separately) Dimensions: 7" long x 3-7/8" wide x 2" tall Voltage: 12V Made in the USA 1-Year warranty
Replaces the gear motor for your Lippert Components slide-out assembly.Features: Replaces the gear motor assembly for your Lippert Components slide-out assembly Double shaft motor with mid-torque rate includes bolt, pin, and coupler
Replaces the gear motor assembly number 524864 for your Lippert Power Gear slide out. Includes dual-shaft, mid-torque motor and pin.Features: Replaces the gear motor assembly number 524864 for your Lippert Power Gear slide out Includes dual-shaft, mid-torque motor and pin Fits: Motor assembly number 524864 on Lippert Power Gear slide outs
Replaces the gear motor assembly on your Lippert Components slide out assembly (524908).Features: Replaces the gear motor assembly on your Lippert Components slide out assembly (524908) Quantity: 1 replacement gear motor assembly
Replaces the gear motor assembly on your Lippert Components Power Gear slide out assembly (523498).Features: Replaces the gear motor assembly on your Lippert Components Power Gear slide out assembly (523498) Quantity: 1 replacement gear motor assembly
Replaces the gear motor assembly for your Lippert slide-out assembly (524276).Features: Replaces the gear motor assembly for your Lippert slide-out assembly (524276) Quantity: 1 gear motor assembly
Replaces the gear motor assembly on your Lippert Components Power Gear slide out assembly (524179).Features: Replaces the gear motor assembly on your Lippert Components Power Gear slide out assembly (524179) Quantity: 1 replacement gear motor assembly
... This electric stabilizer spans the width of your rig for maximum support and has dual, 12V motors that function independently for simple leveling.Features: Cross-frame-mount jack stops front-to-back and side-to-side motion of travel or 5th-wheel trailer Provides support across the width of your motor home or trailer Stabilizes with wide side support brackets Able to be used at the front of the trailer Not recommended for use on front of motorized vehicle Dual, 12V motors operate independently of one another for simple, effective leveling Connecting bracket holds sides of stabilizer together and provides additional support Adjusts to fit the width of your trailer or RV Extra-large footplates help to minimize sinking and tilting Emergency hand crank included Sturdy steel construction Specs: Application: trailers and RVs with frames from 48" to 80" wide Bracket length: 36" Lift: 30" Weight capacity: 6,000 lbs when extended to 30" Weight capacity when legs are extended to 15" is 3,000 lbs 3-Year warranty
Replaces the electric steps, motor, and control unit for your Kwikee 27 series RV steps. Motor and control unit automatically extend and retract the steps when you open and close your door. ... Features: Replaces the steps, motor, and control unit for your Kwikee 27 series steps Switch kit (LC369311) for extension override sold separately Motor works with gearbox to extend and retract the steps Control unit wires steps to the opening and closing of the RV door Integrated safety features help prevent damage to the steps Motor retracts the steps if they strike an obstacle during extension Ignition override retracts the steps when the vehicle's engine is started Non-slip tread and easy-to-see reflective strips on step surface Sturdy, powder coated steel construction with weatherproof wiring withstands the elements Solid steel drive rods and stainless steel bushings provide additional durability Air pressed rivets at pivot points ensure long-term strength Simple installation with existing mounting holes and wiring harness Hardware sold separately Made in the USA Specs: Extended height: 14-1/2" Folded height: 7-5/8" Overall width: 30-5/8" Mounting plate dimensions: 28-7/8" wide x 11-3/4" deep Bolt pattern: 26" wide x 8-3/4" deep Step dimensions: 29" wide x 10-7/8" deep Drop/Rise: 8" Voltage: 12V Control unit amperage: 10A Control unit wire gauge: Green: 12 AWG Purple: 16 AWG Weight capacity: 300 lbs 1-Year warranty Note: This step assembly includes the steps, motor, and control unit only.
Keep your revolutionary In-Wall Slide-Out running smoothly with a replacement motor from Lippert Components. This motor is easy to install in the side wall and will extend and retract your slide-out with ease. Get back to camping and enjoy your RV to the fullest with a replacement In-Wall Slide-Out motor from LCI.
Replaces the motor and actuator for your LCI Through-Frame Slide-Out. Includes both Venture actuator and high speed motor.Features: Replaces the motor and actuator for your LCI Through-Frame Slide-Out Includes both Venture actuator and high speed motor Specs: Length: Extended: 101-1/4" Retracted: 61" Motor dimensions: 6-3/8" long x 3-1/4" 9,500 RPM 30 Amps 18:1 Gear ratio Made in the USA
Replaces the electric step, motor, and control unit for your Kwikee 26 series RV steps. Motor and control unit automatically extend and retract the step when you open and close your door. ... Features: Replaces the step, motor, and control unit for your Kwikee 26 series steps Switch kit (LC369311) for extension override sold separately Motor works with gearbox to extend and retract the step Control unit wires step and step light to the opening and closing of the RV door Amber incandescent light illuminates step to make it easy to see at night Integrated safety features help prevent damage to the steps Motor retracts the steps if they strike an obstacle during extension Ignition override retracts the steps when the vehicle's engine is started Non-slip tread and easy-to-see reflective strips on step surface Sturdy, powder coated steel construction with weatherproof wiring withstands the elements Solid steel drive rods and stainless steel bushings provide additional durability Air pressed rivets at pivot points ensure long-term strength Simple installation with existing mounting holes and wiring harness Hardware sold separately Made in the USA Specs: Extended height: 7" Folded height: 7" Overall width: 25-1/4" Mounting plate dimensions: 24-1/4" wide x 10" deep Bolt pattern: 20-1/2" wide x 7-1/2" deep Step dimensions: 23-1/2" wide x 9-7/8" deep Drop/Rise: 5" Voltage: Motor: 12V Switch kit: 250V Control unit amperage: 10A Light bulb type: C193, incandescent Control unit wire gauge: Green: 12 AWG Purple: 16 AWG Weight capacity: 300 lbs 1-Year warranty Note: This step assembly includes the steps, motor, and control unit only.
Replaces the electric steps, motor, and control unit for your Kwikee 47 series RV steps. Motor and control unit automatically extend and retract the steps when you open and close the door. ... Features: Replaces the steps, motor, and control unit for your Kwikee 47 series steps Switch kit (LC369311) for extension override sold separately Motor works with gearbox to extend and retract the steps Control unit wires steps and step light to the opening and closing of the RV door Integrated safety features help prevent damage to the steps Motor retracts the steps if they strike an obstacle during extension Ignition override retracts the steps when the vehicle's engine is started Sturdy, powder coated steel construction with weatherproof wiring withstands the elements Solid steel drive rods and stainless steel bushings provide additional durability Air pressed rivets at pivot points ensure long-term strength Simple installation with existing mounting holes and wiring harness Hardware sold separately Non-slip tread and easy-to-see reflective strips for step surface sold separately (LC165221) Made in the USA Specs: Extended height: 11-1/4" Folded height: 11-1/4" Overall width: 30-3/8" Mounting plate dimensions: 30-3/8" wide x 20-1/2" deep Bolt pattern: 29" wide x 9" deep At widest point: 17-1/2" deep Step dimensions: 26-1/4" wide x 9-3/4" deep Drop/Rise: 8-1/2" Voltage: Motor: 12V Control unit amperage: 10A Control unit wire gauge: Green: 12 AWG Purple: 16 AWG Weight capacity: 300 lbs 1-Year warranty Note: This step assembly includes the steps, motor, and control unit only.
Replaces mid-torque motor with brake for In-Wall RV slide-out system. This motor is easy to install in the side wall and will extend and retract your slide-out with ease.Specs: Diameter: 42 mm Mid Torque 0.276 D-CUT Features: Replaces the motor in your In-Wall RV slide-out Extends and retracts slide-out with ease No assembly required and easily installs inside the side wall For use on LCI In-Wall slide-outs only Includes 1 motor with brake Made in the USA
Replaces the 500:1 high torque motor for the electric In-Wall RV slide-out system. This dependable and durable motor will get your slide-out back in action and provide reliable operation for years to come.Features: Replaces the 500:1 motor in the electric In-Wall RV slide-out systems Extends and retracts slide-out with ease No assembly required and easily installs inside the side wall For use in the electric In-Wall slide-out system Includes 1 motor
Replaces the 18:1 Tuson motor for your electric through-frame slide-out system.Features: Replaces the 18:1 Tuson motor for your electric through-frame slide-out system Works with LCI slide-outs 125802, 132682, 119129, 122747, 131903, 119128, or 145185 Works with Norco through-frame slide-outs 21700061, R25071, or R25072 Specs: RPM rating: 9,000 Quantity: 1 motor Fits: Lippert electric through-frame slide-out systems: 125802, 132682, 119129, 122747, 131903, 119128, and 145185 Norco through-frame slide-out systems: 21700061, R25071, and R25072
Replaces the electric steps, motor, and control unit for your Kwikee Revolution series RV step. Motor and control unit automatically extend and retract the steps when you open and close the door. ... Features: Replaces the steps, motor, and control unit for your Kwikee Revolution series steps Switch kit (LC369311) for extension override sold separately Motor works with gearbox to extend and retract the steps Control unit wires steps and step light to the opening and closing of the RV door Amber incandescent light illuminates steps to make them easy to see at night Integrated safety features help prevent damage to the steps Motor retracts the steps if they strike an obstacle during extension Ignition override retracts the steps when the vehicle's engine is started Non-slip tread and easy-to-see reflective strips on step surface Sturdy, powder coated steel construction with weatherproof wiring withstands the elements Solid steel drive rods and stainless steel bushings provide additional durability Air pressed rivets at pivot points ensure long-term strength Simple installation with existing mounting holes Switch Pack (905325000) and 4-way wiring harness (301692) sold separately Hardware not included Made in the USA Specs: Extended height: 14-1/2" Folded height: 8" Overall width: 25-1/2" Mounting plate dimensions: 25-1/2" wide x 11-1/8" deep Bolt pattern: 24-5/8" wide x 8-3/4" deep Step dimensions: 23-3/8" wide x 8" deep Drop/Rise: 8" Voltage: Motor: 12V Control unit amperage: 10A Light bulb type: C193, incandescent Control unit wire gauge: Green: 12 AWG Purple: 16 AWG Weight capacity: 300 lbs 1-Year warranty Note: This step assembly includes the steps, motor, and control unit only.
Replaces the electric steps, motor, and control unit for your Kwikee 42 series RV steps. Motor and control unit automatically extend and retract the steps when you open and close your door. ... Features: Replaces the steps, motor, and control unit for your Kwikee 42 series steps Switch kit (LC369311) for extension override sold separately Motor works with gearbox to extend and retract the steps Control unit wires steps to the opening and closing of the RV door Integrated safety features help prevent damage to the steps Motor retracts the steps if they strike an obstacle during extension Ignition override retracts the steps when the vehicle's engine is started Non-slip tread and easy-to-see reflective strips on step surface Sturdy, powder coated steel construction with weatherproof wiring withstands the elements Solid steel drive rods and stainless steel bushings provide additional durability Air pressed rivets at pivot points ensure long-term strength Simple installation with existing mounting holes and wiring harness Hardware sold separately Made in the USA Specs: Extended height: 9-1/4" Folded height: 9-1/4" Overall width: 30-1/4" Mounting plate dimensions: 30-1/4" wide x 24-11/16" deep Bolt pattern: 29" wide x 18" deep Step dimensions: 25-1/4" wide x 9-1/2" deep Drop/Rise: 6" Voltage: Motor: 12V Control unit amperage: 10A Control unit wire gauge: Green: 12 AWG Purple: 16 AWG Weight capacity: 300 lbs 1-Year warranty Note: This step assembly includes the steps, motor, and control unit only.
Replaces the electric steps, motor, and control unit for your Kwikee 25 series RV steps. Motor and control unit automatically extend and retract the steps when you open and close your door. ... Features: Replaces the steps, motor, and control unit for your Kwikee 25 series steps Switch kit (LC369311) for extension override sold separately Motor works with gearbox to extend and retract the steps Control unit wires steps to the opening and closing of the RV door Integrated safety features help prevent damage to the steps Motor retracts the steps if they strike an obstacle during extension Ignition override retracts the steps when the vehicle's engine is started Non-slip tread and easy-to-see reflective strips on step surface Sturdy, powder coated steel construction with weatherproof wiring withstands the elements Solid steel drive rods and stainless steel bushings provide additional durability Air pressed rivets at pivot points ensure long-term strength Simple installation with existing mounting holes and wiring harness Hardware sold separately Made in the USA Specs: Extended height: 20-1/8" Folded height: 9-5/8" Overall width: 25-1/2" Mounting plate dimensions: 23-3/4" wide x 11-3/8" deep Bolt pattern: 22" wide x 8" deep Step dimensions: 24" wide x 11-1/8" deep Drop/Rise: 7" Voltage: 12V Control unit amperage: 10A Control unit wire gauge: Green: 12 AWG Purple: 16 AWG Weight capacity: 300 lbs 1-Year warranty Note: This step assembly includes the steps, motor, and control unit only.
Replaces the electric step, motor, and switch kit for your Kwikee 26 series RV steps. Motor extends and retracts the step when it receives the signal from the switch kit. ... Features: Replaces the step, motor, and switch kit for your Kwikee 26 series steps Control unit (LC379146) for automatic extension sold separately Motor works with gearbox to extend and retract the step Switch kit wires to the step and mounts inside your RV for manual operation Integrated safety feature automatically retracts the step if it strikes an obstacle during extension Non-slip tread and easy-to-see reflective strips on step surface Sturdy, powder coated steel construction with weatherproof wiring withstands the elements Solid steel drive rods and stainless steel bushings provide additional durability Air pressed rivets at pivot points ensure long-term strength Simple installation with existing mounting holes and wiring harness Hardware sold separately Made in the USA Specs: Extended height: 7" Folded height: 7" Overall width: 25-1/4" Mounting plate dimensions: 24-1/4" wide x 10" deep Bolt pattern: 20-1/2" wide x 7-1/2" deep Step dimensions: 23-1/2" wide x 9-7/8" deep Drop/Rise: 5" Voltage: Motor: 12V Switch kit: 250V Weight capacity: 300 lbs 1-Year warranty Note: This step assembly includes the steps, motor, and switch kit only.
Replaces the electric steps, motor, and control unit for your Kwikee 24 series RV step. Motor and control unit automatically extend and retract the steps when you open and close the door. ... Features: Replaces the steps, motor, and control unit for your Kwikee 24 series steps Switch kit (LC369311) for extension override sold separately Motor works with gearbox to extend and retract the steps Control unit wires steps and step light to the opening and closing of the RV door Amber incandescent light illuminates steps to make them easy to see at night Integrated safety features help prevent damage to the steps Motor retracts the steps if they strike an obstacle during extension Ignition override retracts the steps when the vehicle's engine is started Non-slip tread and easy-to-see reflective strips on step surface Sturdy, powder coated steel construction with weatherproof wiring withstands the elements Solid steel drive rods and stainless steel bushings provide additional durability Air pressed rivets at pivot points ensure long-term strength Simple installation with existing mounting holes and wiring harness Hardware sold separately Made in the USA Specs: Extended height: 22-5/8" Folded height: 9-3/4" Overall width: 31-1/2" Mounting plate dimensions: 29-3/4" wide x 11-3/8" deep Bolt pattern: 26" wide x 8" deep Step dimensions: 30" wide x 10-7/8" deep Drop/Rise: 8" Voltage: Motor: 12V Switch kit: 250V Control unit amperage: 10A Light bulb type: C193, incandescent Control unit wire gauge: Green: 12 AWG Purple: 16 AWG Weight capacity: 300 lbs 1-Year warranty Note: This step assembly includes the steps, motor, and control unit only.
Replaces the electric steps, motor, and switch kit for your Kwikee 32 series RV steps. Motor extends and retracts the steps when it receives the signal from the switch kit. ... Features: Replaces the steps, motor, and switch kit for your Kwikee 32 series steps Control unit (LC379146) for automatic extension sold separately Motor works with gearbox to extend and retract the steps Switch kit wires to the steps and mounts inside your RV for manual operation Integrated safety feature automatically retracts the steps if they strike an obstacle during extension Non-slip tread and easy-to-see reflective strips on step surface Sturdy, powder coated steel construction with weatherproof wiring withstands the elements Solid steel drive rods and stainless steel bushings provide additional durability Air pressed rivets at pivot points ensure long-term strength Simple installation with existing mounting holes and wiring harness Hardware sold separately Made in the USA Specs: Extended height: 14-1/8" Folded height: 7-3/4" Overall width: 25-1/2" Mounting plate dimensions: 23-3/4" wide x 11-3/8" deep Bolt pattern: 22" wide x 8" deep Step dimensions: 24" wide x 11-1/8" deep Drop/Rise: 8" Voltage: Motor: 12V Switch kit: 250V Weight capacity: 300 lbs 1-Year warranty Note: This step assembly includes the steps, motor, and switch kit only.
Replaces the electric steps, motor, and control unit for your Kwikee 25 series RV steps. Motor and control unit automatically extend and retract the steps when you open and close your door. ... Features: Replaces the steps, motor, and control unit for your Kwikee 25 series steps Switch kit (LC369311) for extension override sold separately Motor works with gearbox to extend and retract the steps Control unit connects steps and step light to the opening and closing of the RV door Amber incandescent light illuminates steps to make them easy to see at night Integrated safety features help prevent damage to the steps Motor retracts the steps if they strike an obstacle during extension Ignition override retracts the steps when the vehicle's engine is started Non-slip tread and easy-to-see reflective strips on step surface Sturdy, powder coated steel construction with weatherproof wiring withstands the elements Solid steel drive rods and stainless steel bushings provide additional durability Air pressed rivets at pivot points ensure long-term strength Simple installation with existing mounting holes and wiring harness Hardware sold separately Made in the USA Specs: Extended height: 21-7/8" Folded height: 9-7/8" Overall width: 25-1/2" Mounting plate dimensions: 23-3/4" wide x 11-3/8" deep Bolt pattern: 22" wide x 8" deep Step dimensions: 24" wide x 11-1/8" deep Drop/Rise: 8" Voltage: 12V Control unit amperage: 10A Light bulb type: C193, incandescent Control unit wire gauge: Green: 12 AWG Purple: 16 AWG Weight capacity: 300 lbs 1-Year warranty Note: This step assembly includes the steps, motor, and control unit only.
Replaces the slide gear motor assembly for your Power Gear slide out.Features: Replaces the slide gear motor assembly for your Power Gear slide out (421292) Quantity: 1 slide gear motor
Filters
