Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Bill, no the 84 spindle part #TRU74FR does not require a wear sleeve of any type with the grease seal. Did you bend or damage a spindle?
view full answer...The 84545 hub on your Stratos Trail Trailer uses the standard bearing combination for a 3,500 lb axle just like the #84545UC1-EZ and #84545BX. This means the correct bearing kit is the Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles - 3,500 lb…
view full answer...Hello Jeffrey, While I'm sure we have a bearing kit for your car trailer, we don't have any way of knowing off-hand or cross-referencing what bearings you need. You mentioned you have them out, so you should be able to see the part number…
view full answer...You can select your new hubs by matching up your axle weight rating, wheel bolt pattern and the bearings used in your current hubs. Based on my research your hubs are 10 x 2-1/4-inches, are from a 3500-lb axle and have the 5-on-4-1/2 bolt pattern. If…
view full answer...The Trailer Hub and Drum Assembly part #AKHD-545-35-K is the correct replacement for an AL-KO 7230. In regards to the braking assemblies, I suggest getting a new pair, the Electric Trailer Brake Kit part #AKEBRK-35-SA. This option will save you some…
view full answer...From your description the Dexter Nev-R-Adjust Electric Trailer Brake Kit #23-468-469 is exactly what you need. They fit with 10" hubs, are rated for a 3,500 lb axle, and they mount on a 4 bolt brake mounting flange with 2-7/8" spacing on…
view full answer...The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…
view full answer...The spindle on your Dexter axle is going to be similar to the #84 E-Z Lube Spindle #TRU74FR in the image below. You can see there is a hole in the spindle where the grease will push through into your inner bearing. From there it will move along the…
view full answer...In order to determine if hub assembly 8-258-50UC1-EZ will work for you, first know that this assembly is for EZ Lube spindles that require a grease seal with a 1-1/2" inner diameter such as #RG06-020. You are also going to want to remove the hub…
view full answer...Hey Greg, thanks for reaching out. So we do offer a few other 9/16" - 18 wheel studs that will be of sufficient length. The spline diameter of our studs is 0.689" though. We have nothing in that size with a 0.617" spline diameter or…
view full answer...Replacement Mounting Hardware for etrailer and Ram Swivel Marine Jacks - 1,200 lbs and 1,500 lbs Item #MJ-1000B-MBB will actually be perfect for you. I checked the specs on the actual jacks that come with this hardware and it is basically identical…
view full answer...I went out to the warehouse and pulled Fulton bracket kit #F500286 to take measurements for you. First the hole spacing on center for the first 4 holes is 1 inch. Then from the 4th hole to the furthest hole is 2-5/16 inches. The bolts have a thread…
view full answer...