Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hello Mike, Sounds like you are getting things set up the right way and not going over your payload, I respect that. It looks like the weights are the same whether you have a 6 3/4' or 8' bed. If you happen to have an aftermarket hitch,…
view full answer...There are two Timbren systems for your 2023 Ford F-350, like you said, with the best definitely being the following part number: - Timbren Suspension Enhancement System #TFR350SDJ The reason for that is the #TFR350SDJ is designed for standard pickups…
view full answer...If you're wanting to install the Timbren #TFR350SDJ on your 2022 Ford F-350 then you'll want to measure the distance from where your factory bump stops are installed down to the point of contact on the axle. The Timbren #TFR350SDJ are…
view full answer...The proper extension for your setup would be the one that allows you to have clearance of your hitch mounted accessory and also allows you to still be able to pull the steps down. If the receiver tube sticks out past the camper too far then you will…
view full answer...I would love to help you with this Adam, but I am going to need a bit of information on your exact setup to determine what all you will need. Can you tell me how heavy your car trailer is when loaded and how much extension you will need? Also I will…
view full answer...Hey Conner, thanks for reaching out! I'm attaching a link to our returns policy for your reference. You aren't the only one in this situation where tire chains like the Titan Chain Snow Tire Chains #TC1530 are required for travel but may not…
view full answer...The Gen Y Boss Weight Distribution Shanks listed below will all work with Blue Ox weight distribution systems. However, it is recommended to disconnect these systems when the trailer is being stored because of the extra tension placed on the bars and…
view full answer...Hey Guy, I wasn't able to pin down what exact wiring came on your Palomino camper, but generally the in-bed truck campers use a 7-Way so they are able to provide power to all of the lights as well as any power that the camper requires to operate.…
view full answer...A boat trailer with a 5 pin flat trailer connector on it would typically be equipped with hydraulic surge brakes. The extra pin controls an electric lockout solenoid on the surge coupler that prevents the brakes from actuating when the trailer is…
view full answer...I have another option for you, but the Trailer Connector Adapter w/ Lamp-Out Sensor Bypass - 7-Way RV to 7-Way RV - Vehicle End #20142 has built in resistors for vehicles with a lamp-out error and and since the lights are working properly when…
view full answer...Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…
view full answer...It is possible that Fulton jack #FTJ120W0301, which you reference, is the same jack that is used on your Ranger boat trailer. If your current obsolete jack is a side wind swivel jack with 10 inches of lift and rated for 1,200 pounds and it mounts to…
view full answer...