Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When a truck bed camper or hitch extender pushes your trailer wiring too far out, this harness adds the distance you need. The TorkLift Wiring Harness Extension for 60" SuperTruss Hitch Extender - 7-Way RV gives you a total of 68" of length including the connectors. It bridges the gap cleanly between your vehicle’s 7-way and the trailer’s plug so you can tow without stressing or stretching your wiring.
Tight wiring runs can lead to pulled pins and damaged sockets. This extension’s plug-and-lead design takes that strain off by giving the wiring room to move naturally when backing up or turning. It keeps both connectors aligned and plugged in securely, helping to prevent bent contacts or accidental disconnections.
You don’t have to cut or splice anything to make this work. Both ends come ready with standard 7-blade RV connectors—male on one end, female on the other—so you just plug it in and go. It’s an easy add-on that works with any standard 7-way setup and gets you back to towing fast.
The durable construction is made for real towing conditions, from hauling campers to pulling trailers behind hitch extensions. It’s a straightforward solution that stays reliable even when used often, keeping power flowing through all seven circuits for lights, brakes, and charging.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Torque lift line of wiring harness extensions for use with the super truck hitch extenders. These are available in several different lengths. Just depending on how long that hitch extender that you're using is going to be. This is Torque's Lifts 36" extension that matches their 36" super stress. If you're going with the longer super truss, get the longer. If you're going with the shorter, get the shorter. Really a nice option to where you can plug it right into the back of your vehicle, bring your power down to where it's right here, readily available and accessible for you to get to. What we're going to do is take our, what looks like a trailer plug end, we're going to pass it through our bracket.
It's just flexible enough we can kind of bend that bracket so allow it to come through. Then here's what we want, that's our 7 pole connector. We're going to be bale to hook our trailer up right here. We've got the nice safety chain connections there an then also our wiring connection. Slide that in.
We're pass our screw through the face there and then just put our nuts on the back. Now, the hardware's not provided so you'll need some hardware to pass through there. You can see our bracket's kind of got the oblong holes to make it to where it'll fit a lot of different style harnesses. I'm going to put a flat washer on to give our nut a good surface to bite to when we tighten it down. Now we can go ahead and tighten those down as well. At that point, we're mounted on, got a nice secure connection point.
We can basically just plug this right into the back of our truck. You don't want this to be hanging down underneath our hitch where it might drag or something like that. That will complete today's look at the Torque Lift wiring harness extensions for the super truck hitch extender.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
Ratings & Reviews
Jenny N.
11/29/2021
I will have our customer service team reach out to you.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kate F.
3/11/2026
Thanks for sending the photo, that really helps Amy. It definitely looks like the connector body is an extremely tight fit in that bracket, which explains why it was such a pain to get through. I can see how that would make the install way more frustrating than it should be. I’ll pass this along to Torklift. You said "Almost," I just want to confirm that you were able to get it through?