Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5,200-lb and 6,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease ... no need to pack bearings Sturdy iron construction Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included Hub and drum are made in the USA Specs: Application: 5,200-lb and
Marine-grade hub is designed for trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included. manufacturers, including Dexter, Lippert (LCI), and AL-KO Wheel size: 13" to 15" Bolt pattern: 5 on 4-1/2" Wheelstud dimensions: 1/2" diameter x 1-5/16" long Grease cap flange diameter
Hub is designed for use on axles with agricultural applications. Fits 6,000-lb axles. Inner bearing (506849) and race, outer bearing (501349) and race, grease seal, grease cap, and lug nuts are included. Grease seal, grease cap, bearings, and (8) 5/8"-18 lug nuts are included - races installed in hub For use on spindle part #AS6000F Yellow zinc finish on wheelstuds, lug nuts and grease cap help
Install this hub-and-drum assembly on your trailer. Hub fits 8,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (02475) and race, grease seal, grease cap, wheel bolts, and ... ; brake assembly Brake pad width: 3-3/8" Bolt pattern: 8 on 6-1/2" Wheelstud diameter: 5/8" Pilot hole diameter: 4-3/4" Weight capacity: 4,000 lbs Bearing, Race, and Seal Information
Upgrade to disc brakes with these slip-on rotors and get safer, more consistent braking. Tow your boat and launch in either fresh or brackish water? The Maxx coating on this brake kit is even better than Dacromet for superior corrosion protection. required to activate brakes Specs: Fits: Axle capacity: 8,000 lbs Axle type: AL-KO/AXIS/Quality/Rockwell Wheel size: 16" and larger Bolt pattern: 8 on 6-1/2" Wheel bolt diameter: 5/8" Rotor
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…
Hi Jerry, For your 2025 Kia Sorento PHEV you would need the Curt Trailer Hitch Receiver #C37RV for the trailer hitch. The right light kit for your Sorento is going to depend on a few factors. For models with the tow package, like you stated you have,…
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…
When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…
Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…
The green connector in your truck is not the correct plug. It is normally a blue plug like what I have shown in the photo that plugs into the adapter part #C51332 if you are using a Curt brake controller like part #C51170. There will be a port to…
Hub fits 12,000-lb general-duty Dexter axles. Inner bearing (3984) and race, outer bearing (28682) and race, oil seal, cap, and lug nuts included. Oil bath system allows for easy maintenance. Drum and mounting bolts (7-103) not included. cap, retaining ring, and lug nuts are included Sturdy iron construction Hub is made in the USA Specs: Application: 12,000-lb axles Bolt pattern: 8 on 6-1/2" Pilot hole diameter: 4-3/4" Wheel
Kodiak's hub-and-rotor assembly makes it easy to change from drum brakes to disc brakes. Made of machined cast iron with a corrosion-resistant dacromet coating, this 1-piece unit is balanced for a smooth ride and furnished with standard races. the USA Specs: Fits: Axle capacity: 8,000 lbs Wheel size: 16" and larger Bolt pattern: 8 on 6-1/2" Wheel bolt diameter: 5/8" Rotor diameter: 13" 3-Year warranty Bearing, Race and
This hub-and-drum assembly fits 7,000-lb axles. Compatible with electric and hydraulic brakes. Inner bearing (25580) and race, outer bearing (14125A) and race, oil seal, oil cap, wheel bolts, and ... : 12" diameter x 2" wide Works with 12" electric and hydraulic brake assemblies Bolt pattern: 8 on 6-1/2" Grease cap flange diameter: 2.72" Wheelstud diameter: 5/8" Weight
Hub is designed for use on trailer idler axles. Fits 10,000-lb axles that require a 3-1/4" inner diameter seal. Inner bearing (395S) and race, outer bearing (387A) and race, oil seal (10-56), retaining ring (33-52-1), and lug nuts (6-109) are soldseparately. sold separately Specs: Application: 10,000-lb trailer axles requiring 3-1/4" inner diameter oil seal Bolt pattern: 8 on 6-1/2" Wheelstud dimensions: 5/8" diameter x 1-1/16" long
... . 5/8" Wheelstuds and races are included. sold separately Specs: Application: 8,000-lb trailer axles with #42 spindles Bolt pattern: 8 on 6-1/2" Wheelstud dimensions: 5/8" diameter x 3-3/16" long Bolt size: 5/8"-18 Grease
Corrosion-resistant galvanized steel hub is great for marine use. Fits 8,000-lb axles with #42 spindles. Can be used on idler axles or paired with a 13.1" rotor for disc brake applications. Oil ... spindles Bolt pattern: 8 on 6-1/2" Wheelstud dimensions: 5/8" diameter x 3-3/16" long Bolt size: 5/8"-18 Oil cap flange diameter: 2.875" Weight capacity: 4,000 lbs Weight: 16.5 lbs
Filters
