A tractor or skid steer bucket isn't built with a hitchreceiver but this clamp-on changes that. Slide it on, tighten it down, and you have a 2" receiver ready for moving trailers or attachments without climbing off the machine.That's when this clamp-on receiver comes in. It mounts right to the edge of your bucket with a screw clamp, no drilling or welding required. Tighten it down, slide in a ball mount or other 2" hitch accessory, and your bucket is ready to tow.
Having a big receiver with smaller gear can be a pain. Big Truck Big RV magnetic reducers make it easy to step a 3" receiver down to 2". Magnets hold both sleeves in place while you add your gear and secure it with a hitch pin.Specs Application: Compatible for use separately or together to step 3" down to 2" Black: reduces 3" receiver to 2-1/2" Red: reduces 2-1/2" receiver to 2" Construction & Design: Material: Solid steel with built-in neodymium magnets Finish: Powder coated with e-coat Dimensions: Red reducer: 5" long x 2.5" wide x 2.5" tall Black reducer: 6" long x 3" wide x 3" tall
Insert this shock-absorbing, adjustable mount into your hitch to get 5 stacked 2-1/2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitchreceiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 5 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories Shock-absorbing design ensures a smooth, steady ride Technology functions like a torsion axle to limit transfer of road shock from trailer to vehicle and vice versa No airbags to maintain and fewer moving parts to repair or replace than with other shock-absorbing solutions Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitchreceiver sold separately SAE J684 certified Made in the USA Specs: Application: 3" x 3" trailer hitchreceivers Built-in receiver size: 2-1/2" x 2-1/2" Maximum drop: 9" Maximum rise: 3" 2" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 21,000 lbs Maximum tongue weight: 2,400 lbs Optimal ride tongue weight (when used with 2-5/16" ball): 1,600 lbs - 2,400 lbs Overall height: 12-1/2" Total from center of 5/8" pin hole with included ball mount installed: 17-5/8" Total length from center of 5/8" pin hole without ball mount installed: 14-3/8" Distance from adjustment pin hole to 2nd hitchreceiver pin hole: 12-3/8" Hitch pin hole diameters: 5/8" and 3/4" Accessory pin hole diameter: 5/8" 10-Year limited warranty This unique adjustable ball mount from Gen-Y Hitch has a vertical shank that is made up of 5 stacked 2-1/2" receivers.
Insert this shock-absorbing, adjustable mount into your hitch to get 4 stacked 2-1/2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitchreceiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 4 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories Shock-absorbing design ensures a smooth, steady ride Technology functions like a torsion axle to limit transfer of road shock from trailer to vehicle and vice versa No airbags to maintain and fewer moving parts to repair or replace than with other shock-absorbing solutions Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitchreceiver sold separately SAE J684 certified Made in the USA Specs: Application: 3" x 3" trailer hitchreceivers Built-in receiver size: 2-1/2" x 2-1/2" Maximum drop: 6" Maximum rise: 3" 2" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 21,000 lbs Maximum tongue weight: 2,400 lbs Optimal ride tongue weight (when used with 2-5/16" ball): 1,600 lbs - 2,400 lbs Overall height: 12-1/2" Total from center of 5/8" pin hole with included ball mount installed: 17-3/8" Total length from center of 5/8" pin hole without ball mount installed: 14-3/8" Distance from adjustment pin hole to 2nd hitchreceiver pin hole: 12-3/8" Hitch pin hole diameters: 5/8" and 3/4" Accessory pin hole diameter: 5/8" 10-Year limited warranty This unique adjustable ball mount from Gen-Y Hitch has a vertical shank that is made up of 4 stacked 2-1/2" receivers.
Insert this heavy-duty mount into your 3" hitch to get 4 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. ... Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitchreceiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 4 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories 2 Pins included to secure accessories to shank Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitchreceiver sold separately SAE J684 certified Made in the USA Specs: Application: 3" x 3" trailer hitchreceivers Built-in receiver size: 2-1/2" x 2-1/2" Maximum drop: 6" Maximum rise: 3" 2" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 32,000 lbs Maximum tongue weight: 3,500 lbs Overall height: 12-3/4" Total length with included ball mount installed: 17-3/8" Total length without ball mount installed: 13" Hitch pin hole diameters: 5/8" and 3/4" Accessory pin hole diameter: 3/4" Multiple Stacked Receivers for Easy Adjustment This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 4 stacked receivers that sits along the vertical shank of the unit.
Get ultimate adjustablilty with this 5-way drop hitch. Easily change the height of the 3-ball mount, which also has a tow hook attached. Use the pintle lock to hook up to a lunette ring. ... Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into receiver adapter on included drop hitch (or your vehicle's hitchreceiver) Hitch balls provide connection points for standard ball couplers Pintle lock allows you to hook up to a lunette ring coupler D-Ring allows multiple off-roading and recovery uses Removable pintle lock can be stowed on bottom side of ball mount Stacked receivers provide a rise or drop to match the height of your application Use with the included ball mount and pintle lock or with your own accessories - even lets you use your tow bar for flat towing Move accessory up or down and secure at chosen height with included pins Built-in anti-rattle bolts on drop hitch reduce vibration and noise Adjust with included wrench Heavy-duty steel construction is ideal for towing extra-heavy loads Textured black powder coat finish resists corrosion D-ring and pins and clips are red for a fun accent of color Meets SAE J684 towing safety regulations (4) 5/8" Hitch pins with clips included for securing accessories, adapter, and shank Hitch locks sold separately Designed in the USA by US Military Veteran Specs: Application: 2" x 2" trailer receivers Maximum towing capacity: 30,000 lbs Maximum tongue weight: 3,000 lbs Hitch ball sizes: 1-7/8", 2", and 2-5/16" Maximum drop: 10" Maximum rise: 10" Incremental height adjustment: 2-1/2" Removable 3-ball mount dimensions: 11-1/2" long (with D-ring extended) x 7-1/4" tall x 7-1/4" wide Shank lengh: 8-1/2" Fits lunette ring couplers with a diameter of 2-1/2", or 3" Shackle size: 3/4" Limited lifetime warranty
Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…
Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…
From what I can find the Norcold N306.3 fridge has a 2.7 cu ft capacity and is 20-1/8" wide and 26" tall. The most similar option we can offer is the 3.2 cu ft Everchill RV Mini Refrigerator #324-000111. The #324-000111 measures…
Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…
Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…
Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…
Get ultimate adjustablilty with this 5-way drop hitch. Easily change the height of the 3-ball mount, which also has a tow hook attached. Use the pintle lock to hook up to a lunette ring. ... Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into receiver adapter on included drop hitch (or your vehicle's hitchreceiver) Hitch balls provide connection points for standard ball couplers Pintle lock allows you to hook up to a lunette ring coupler D-Ring allows multiple off-roading and recovery uses Removable pintle lock can be stowed on bottom side of ball mount Stacked receivers provide a rise or drop to match the height of your application Use with the included ball mount and pintle lock or with your own accessories - even lets you use your tow bar for flat towing Move accessory up or down and secure at chosen height with included pins Built-in anti-rattle bolts on drop hitch reduce vibration and noise Adjust with included wrench Heavy-duty steel construction is ideal for towing extra-heavy loads Textured black powder coat finish resists corrosion D-ring and pins and clips are red for a fun accent of color Meets SAE J684 towing safety regulations (4) 5/8" Hitch pins with clips included for securing accessories, adapter, and shank Hitch locks sold separately Designed in the USA by US Military Veteran Specs: Application: 2-1/2" x 2-1/2" trailer receivers Maximum towing capacity: 30,000 lbs Maximum tongue weight: 3,000 lbs Hitch ball sizes: 1-7/8", 2", and 2-5/16" Maximum drop: 10" Maximum rise: 10" Incremental height adjustment: 2-1/2" Removable 3-ball mount dimensions: 11-1/2" long (with D-ring extended) x 7-1/4" tall x 7-1/4" wide Shank lengh: 8-1/2" Fits lunette ring couplers with a diameter of 2-1/2", or 3" Shackle size: 3/4" Limited lifetime warranty
Get ultimate adjustablilty with this 5-way drop hitch. Easily change the height of the 3-ball mount, which also has a tow hook attached. Use the pintle lock to hook up to a lunette ring. ... Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into receiver adapter on included drop hitch (or your vehicle's hitchreceiver) Hitch balls provide connection points for standard ball couplers Pintle lock allows you to hook up to a lunette ring coupler D-Ring allows multiple off-roading and recovery uses Removable pintle lock can be stowed on bottom side of ball mount Stacked receivers provide a rise or drop to match the height of your application Use with the included ball mount and pintle lock or with your own accessories - even lets you use your tow bar for flat towing Move accessory up or down and secure at chosen height with included pins Built-in anti-rattle bolts on drop hitch reduce vibration and noise Adjust with included wrench Heavy-duty steel construction is ideal for towing extra-heavy loads Textured black powder coat finish resists corrosion D-ring and pins and clips are black to match hitch perfectly Meets SAE J684 towing safety regulations (4) 5/8" Hitch pins with clips included for securing accessories, adapter, and shank Hitch locks sold separately Designed in the USA by US Military Veteran Specs: Application: 2-1/2" x 2-1/2" trailer receivers Maximum towing capacity: 30,000 lbs Maximum tongue weight: 3,000 lbs Hitch ball sizes: 1-7/8", 2", and 2-5/16" Maximum drop: 10" Maximum rise: 10" Incremental height adjustment: 2-1/2" Removable 3-ball mount dimensions: 11-1/2" long (with D-ring extended) x 7-1/4" tall x 7-1/4" wide Shank lengh: 8-1/2" Fits lunette ring couplers with a diameter of 2-1/2", or 3" Shackle size: 3/4" Limited lifetime warranty
Get ultimate adjustablilty with this 5-way drop hitch. Easily change the height of the 3-ball mount, which also has a tow hook attached. Use the pintle lock to hook up to a lunette ring. ... Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into receiver adapter on included drop hitch (or your vehicle's hitchreceiver) Hitch balls provide connection points for standard ball couplers Pintle lock allows you to hook up to a lunette ring coupler D-Ring allows multiple off-roading and recovery uses Removable pintle lock can be stowed on bottom side of ball mount Stacked receivers provide a rise or drop to match the height of your application Use with the included ball mount and pintle lock or with your own accessories - even lets you use your tow bar for flat towing Move accessory up or down and secure at chosen height with included pins Built-in anti-rattle bolts on drop hitch reduce vibration and noise Adjust with included wrench Heavy-duty steel construction is ideal for towing extra-heavy loads Textured black powder coat finish resists corrosion D-ring and pins and clips are black to match hitch perfectly Meets SAE J684 towing safety regulations (4) 5/8" Hitch pins with clips included for securing accessories, adapter, and shank Hitch locks sold separately Designed in the USA by US Military Veteran Specs: Application: 2" x 2" trailer receivers Maximum towing capacity: 30,000 lbs Maximum tongue weight: 3,000 lbs Hitch ball sizes: 1-7/8", 2", and 2-5/16" Maximum drop: 10" Maximum rise: 10" Incremental height adjustment: 2-1/2" Removable 3-ball mount dimensions: 11-1/2" long (with D-ring extended) x 7-1/4" tall x 7-1/4" wide Shank lengh: 8-1/2" Fits lunette ring couplers with a diameter of 2-1/2", or 3" Shackle size: 3/4" Limited lifetime warranty
Get ultimate adjustablilty with this 5-way drop hitch. Easily change the height of the 3-ball mount, which also has a tow hook attached. Use the pintle lock to hook up to a lunette ring. ... Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into receiver adapter on included drop hitch (or your vehicle's hitchreceiver) Hitch balls provide connection points for standard ball couplers Pintle lock allows you to hook up to a lunette ring coupler D-Ring allows multiple off-roading and recovery uses Removable pintle lock can be stowed on bottom side of ball mount Stacked receivers provide a rise or drop to match the height of your application Use with the included ball mount and pintle lock or with your own accessories - even lets you use your tow bar for flat towing Move accessory up or down and secure at chosen height with included pins Built-in anti-rattle bolts on drop hitch reduce vibration and noise Adjust with included wrench Heavy-duty steel construction is ideal for towing extra-heavy loads Textured black powder coat finish resists corrosion D-ring and pins and clips are blue for a fun accent of color Meets SAE J684 towing safety regulations (4) 5/8" Hitch pins with clips included for securing accessories, adapter, and shank Hitch locks sold separately Designed in the USA by US Military Veteran Specs: Application: 2" x 2" trailer receivers Maximum towing capacity: 30,000 lbs Maximum tongue weight: 3,000 lbs Hitch ball sizes: 1-7/8", 2", and 2-5/16" Maximum drop: 10" Maximum rise: 10" Incremental height adjustment: 2-1/2" Removable 3-ball mount dimensions: 11-1/2" long (with D-ring extended) x 7-1/4" tall x 7-1/4" wide Shank lengh: 8-1/2" Fits lunette ring couplers with a diameter of 2-1/2", or 3" Shackle size: 3/4" Limited lifetime warranty
Get ultimate adjustablilty with this 5-way drop hitch. Easily change the height of the 3-ball mount, which also has a tow hook attached. Use the pintle lock to hook up to a lunette ring. ... Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into receiver adapter on included drop hitch (or your vehicle's hitchreceiver) Hitch balls provide connection points for standard ball couplers Pintle lock allows you to hook up to a lunette ring coupler D-Ring allows multiple off-roading and recovery uses Removable pintle lock can be stowed on bottom side of ball mount Stacked receivers provide a rise or drop to match the height of your application Use with the included ball mount and pintle lock or with your own accessories - even lets you use your tow bar for flat towing Move accessory up or down and secure at chosen height with included pins Built-in anti-rattle bolts on drop hitch reduce vibration and noise Adjust with included wrench Heavy-duty steel construction is ideal for towing extra-heavy loads Textured black powder coat finish resists corrosion D-ring and pins and clips are blue for a fun accent of color Meets SAE J684 towing safety regulations (4) 5/8" Hitch pins with clips included for securing accessories, adapter, and shank Hitch locks sold separately Designed in the USA by US Military Veteran Specs: Application: 2-1/2" x 2-1/2" trailer receivers Maximum towing capacity: 30,000 lbs Maximum tongue weight: 3,000 lbs Hitch ball sizes: 1-7/8", 2", and 2-5/16" Maximum drop: 10" Maximum rise: 10" Incremental height adjustment: 2-1/2" Removable 3-ball mount dimensions: 11-1/2" long (with D-ring extended) x 7-1/4" tall x 7-1/4" wide Shank lengh: 8-1/2" Fits lunette ring couplers with a diameter of 2-1/2", or 3" Shackle size: 3/4" Limited lifetime warranty
Swap between all your different hitch accessories with this adapter. It converts a 3" receiver into a 2-1/2" or 2" receiver. Includes pin and clip. Not for towing; use for hitch accessories only.Features: Adapts 3" hitchreceiver into 2-1/2" or 2" receiver to work with your accessory Nested design: outer sleeve for 2-1/2" reciever; add inner sleeve for 2" Stays in place with tabs Includes 4" hitch pin and clip Made of heavy-duty steel with black powder coat finish Specs: Dimensions: Large tube: 6-1/4" long x 3" wide x 3" tall Smaller tube: 6-1/4" long x 2-1/2" wide x 2-1/2" tall Distance from center of hitch pin hole to front of the tubes: 2-3/4" Distance from from center of hitch pin hole to back of tubes: 3-1/2" Note: Do not use for towing.
Insert this shock-absorbing, adjustable mount into your hitch to get 6 stacked 2-1/2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitchreceiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 6 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories Shock-absorbing design ensures a smooth, steady ride Technology functions like a torsion axle to limit transfer of road shock from trailer to vehicle and vice versa No airbags to maintain and fewer moving parts to repair or replace than with other shock-absorbing solutions Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitchreceiver sold separately SAE J684 certified Made in the USA Specs: Application: 3" x 3" trailer hitchreceivers Built-in receiver size: 2-1/2" x 2-1/2" Maximum drop: 12" Maximum rise: 12" 2" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 21,000 lbs Maximum tongue weight: 2,400 lbs Optimal ride tongue weight (when used with 2-5/16" ball): 1,600 lbs - 2,400 lbs Hitch pin hole diameters: 5/8" and 3/4" Accessory pin hole diameter: 5/8" 10-Year limited warranty This unique adjustable ball mount from Gen-Y Hitch has a vertical shank that is made up of 6 stacked 2-1/2" receivers.
Insert this heavy-duty mount into your 3" hitch to get 4 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. ... Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitchreceiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 4 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories 2 Pins included to secure accessories to shank Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitchreceiver sold separately SAE J684 certified Made in the USA Specs: Application: 3" x 3" trailer hitchreceivers Built-in receiver size: 2-1/2" x 2-1/2" Maximum drop: 9" Maximum rise: 9" 2" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 32,000 lbs Maximum tongue weight: 3,500 lbs Overall height: 12-3/4" Total length with included ball mount installed: 17-3/8" Total length without ball mount installed: 13" Hitch pin hole diameters: 5/8" and 3/4" Accessory pin hole diameter: 3/4" Multiple Stacked Receivers for Easy Adjustment This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 4 stacked receivers that sits along the vertical shank of the unit.
Insert this heavy-duty mount into your 2-1/2" hitch to get 4 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. ... Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitchreceiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 4 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories 2 Pins included to secure accessories to shank Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitchreceiver sold separately SAE J684 certified Made in the USA Specs: Built-in receiver size: 2-1/2" x 2-1/2" Maximum drop: 6" Maximum rise: 3" Gross towing weight: 32,000 lbs Maximum tongue weight: 3,500 lbs Overall height: 12-13/16" Total from center of pin hole with included ball mount installed: 13-1/2" Total length from center of pin hole without ball mount installed: 9" Hitch pin hole diameter: 5/8" Distance between pin holes on shank: 1" Designed for 1.5 or smaller lunette rings Limited lifetime warranty
Insert this heavy-duty mount into your 3" hitch to get 5 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. ... Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitchreceiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 5 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories 2 Pins included to secure accessories to shank Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitchreceiver sold separately SAE J684 certified Made in the USA Specs: Application: 3" x 3" trailer hitchreceivers Built-in receiver size: 2-1/2" x 2-1/2" Maximum drop: 12" Maximum rise: 12" 2" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 32,000 lbs Maximum tongue weight: 3,500 lbs Overall height: 15-3/4" Total length from center of 5/8" pin hole with included ball mount installed: 12" Total length from center of 5/8" pin hole without ball mount installed: 9" Distance from center of 5/8" pin hole to first weld on shank: 3" Distance from center of 5/8" pin hole to base of receivers: 4-5/8" Hitch pin hole diameters: 5/8" and 3/4" Distance between pin holes: 1" Accessory pin hole diameter: 3/4" Multiple Stacked Receivers for Easy Adjustment This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 5 stacked receivers that sits along the vertical shank of the unit.
Insert this shock-absorbing, adjustable mount into your hitch to get 5 stacked 2-1/2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitchreceiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 5 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories Shock-absorbing design ensures a smooth, steady ride Technology functions like a torsion axle to limit transfer of road shock from trailer to vehicle and vice versa No airbags to maintain and fewer moving parts to repair or replace than with other shock-absorbing solutions Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel with zinc primer and epoxy powder coat resists corrosion Hitch pin and clip or hitch lock for securing to hitchreceiver sold separately SAE J684 certified Made in the USA Specs: Application: 3" x 3" trailer hitchreceivers Built-in receiver size: 2-1/2" x 2-1/2" Maximum drop: 9" Optimal ride tongue weight (when used with 2-5/16" ball): 2,000 lbs - 3,500 lbs Gross towing weight: 32,000 lbs Maximum tongue weight: 3,500 lbs Overall height: 15-13/16" Total from center of 5/8" pin hole with included ball mount installed: 17-1/4"" Total length from center of 5/8" pin hole without ball mount installed: 12-7/8" Hitch pin hole diameters: 5/8" and 3/4" Distance between pin holes on shank: 1-1/2" 5 Year warranty on all moving parts Limited lifetime warranty on all remaining components
Ideal for the rigors of off-road towing, this vehicle-side hitch works with your trailer-side Lock N Roll coupler (sold separately) to form a strong connection that is safe and secure, no matter the terrain. 3-Position adjustment channel included.Features: Channel-mount hitch links with Lock 'N' Roll trailer-side coupler (sold separately) to hook up your trailer to your tow vehicle Shank of channel bracket slides into hitchreceiverHitch bolts into bracket Head unit provides attachment point for trailer-side coupler More secure connection than a traditional ball coupler Vehicle-side latching plates interlock with trailer-side coupler to form strong connection No more worries about coupler popping off of ball Articulating design softens road shock and is great for off-roading Bearing in head unit allows for 360 degrees of rotation Full articulation when paired with trailer-end coupler - setup pivots side to side and up and down Tight, interlocked connection creates smoother, quieter ride than pintle hitch Close-fit connection reduces rattling noise and jerking motion Channel bracket lets you adjust the hitch's height to match different trailers Raise or lower hitch and bolt into channel to change height Grade 5 mounting bolts and locknuts included Fast, easy hookup and disconnect Wide range of motion makes it easy to connect, even at an angle Attachment hardware included for securing latching plates Steel alloy construction is strong and durable Black paint finish resists corrosion Meets SAE J684 towing safety regulations Hitch pin and clip or hitch lock sold separately Made in the USA Specs: Application: 2" x 2" trailer hitchreceivers Maximum gross trailer weight: 11,000 lbs Maximum tongue weight: 1,100 lbs Channel dimensions: 7-1/2" tall x 3-1/16" wide x 2-1/4" deep Hole spacing: 2" center to center Mounting bolt dimensions: 5/8" diameter x 5" long Center of hitch pin hole to center of adjustment holes: 8-3/8" Maximum drop: 4-1/4" Maximum rise: 4-1/4" Hitch pin hole diameter: 5/8" Latching pin dimensions: Pin diameter: 1/2" Usable length: 4-3/4" Limited lifetime warranty This hitch combines with a Lock 'N' Roll trailer-end coupler (sold separately) to create a safe, secure, fully articulating connection that's great for towing whether you're on the road or off-road.
Insert this shock-absorbing, adjustable mount into your hitch to get 4 stacked 2-1/2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitchreceiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 4 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories Shock-absorbing design ensures a smooth, steady ride Technology functions like a torsion axle to limit transfer of road shock from trailer to vehicle and vice versa No airbags to maintain and fewer moving parts to repair or replace than with other shock-absorbing solutions Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel with zinc primer and epoxy powder coat resists corrosion Hitch pin and clip or hitch lock for securing to hitchreceiver sold separately SAE J684 certified Made in the USA Specs: Application: 3" x 3" trailer hitchreceivers Built-in receiver size: 2-1/2" x 2-1/2" Maximum drop: 6" Optimal ride tongue weight (when used with 2-5/16" ball): 2,000 lbs - 3,500 lbs Gross towing weight: 32,000 lbs Maximum tongue weight: 3,500 lbs Overall height: 12-13/16" Total from center of 5/8" pin hole with included ball mount installed: 17" Total length from center of 5/8" pin hole without ball mount installed: 12-3/4" Hitch pin hole diameters: 5/8" and 3/4" Distance between pin holes on shank: 1-1/2" 5 Year warranty on all moving parts Limited lifetime warranty on all remaining components
Insert this heavy-duty mount into your 3" hitch to get 3 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. ... Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitchreceiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 3 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories 2 Pins included to secure accessories to shank Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitchreceiver sold separately SAE J684 certified Made in the USA Specs: Application: 3" x 3" trailer hitchreceivers Built-in receiver size: 2-1/2" x 2-1/2" Maximum drop: 6" Maximum rise: 6" 2" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 32,000 lbs Maximum tongue weight: 3,500 lbs Overall height: 9-3/4" Total length from center of 5/8" pin hole with included ball mount installed: 12" Total length from center of 5/8" pin hole without ball mount installed: 9" Distance from center of 5/8" pin hole to first weld on shank: 3" Distance from center of 5/8" pin hole to base of receivers: 4-5/8" Hitch pin hole diameters: 5/8" and 3/4" Distance between pin holes: 1" Accessory pin hole diameter: 3/4" Multiple Stacked Receivers for Easy Adjustment This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 3 stacked receivers that sits along the vertical shank of the unit.
Ideal for the rigors of off-road towing, this vehicle-side hitch works with your trailer-side Lock N Roll coupler (sold separately) to form a strong connection that is safe and secure, no matter the terrain. 3-Position adjustment channel included.Features: Channel-mount hitch links with Lock 'N' Roll trailer-side coupler (sold separately) to hook up your trailer to your tow vehicle Shank of channel bracket slides into hitchreceiverHitch bolts into bracket Head unit provides attachment point for trailer-side coupler More secure connection than a traditional ball coupler Vehicle-side latching plates interlock with trailer-side coupler to form strong connection No more worries about coupler popping off of ball Articulating design softens road shock and is great for off-roading Bearing in head unit allows for 360 degrees of rotation Full articulation when paired with trailer-end coupler - setup pivots side to side and up and down Tight, interlocked connection creates smoother, quieter ride than pintle hitch Close-fit connection reduces rattling noise and jerking motion Channel bracket lets you adjust the hitch's height to match different trailers Raise or lower hitch and bolt into channel to change height Grade 5 mounting bolts and locknuts included Fast, easy hookup and disconnect Wide range of motion makes it easy to connect, even at an angle Attachment hardware included for securing latching plates Steel alloy construction is strong and durable Black paint finish resists corrosion Meets SAE J684 towing safety regulations Hitch pin and clip or hitch lock sold separately Made in the USA Specs: Application: 1-1/4" x 1-1/4" trailer hitchreceivers Maximum gross trailer weight: 2,500 lbs Maximum tongue weight: 250 lbs Channel dimensions: 7-1/2" tall x 3" wide x 1-3/4" deep Hole spacing: 2" center to center Mounting bolt dimensions: 5/8" diameter x 5" long Center of hitch pin hole to center of adjustment holes: 6-1/2" Maximum drop: 4-1/4" Maximum rise: 4-1/4" Hitch pin hole diameter: 1/2" Latching pin dimensions: Pin diameter: 1/2" Usable length: 4-3/4" Limited lifetime warranty This hitch combines with a Lock 'N' Roll trailer-end coupler (sold separately) to create a safe, secure, fully articulating connection that's great for towing whether you're on the road or off-road.
Insert this heavy-duty mount into your 2-1/2" hitch to get 6 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. ... Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitchreceiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 6 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories 2 Pins included to secure accessories to shank Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitchreceiver sold separately SAE J684 certified Made in the USA Specs: Built-in receiver size: 2-1/2" x 2-1/2" Maximum drop: 12" Maximum rise: 3" Gross towing weight: 32,000 lbs Maximum tongue weight: 3,500 lbs Overall height: 18-13/16" Total length from center of 5/8" pin hole with included ball mount installed: 16-13/16" Total length from center of 5/8" pin hole without ball mount installed: 12-3/8" Hitch pin hole diameter: 5/8" Distance between pin holes on shank: 1" Designed for 1.5 or smaller lunette rings Limited lifetime warranty
Get a 2-1/2" receiver and 2" receiver on the same hitch. Tow a trailer and carry a bike rack simultaneously. Haul up to 30,000 lbs with TorkLift's exclusive weight distribution (sold separately). ... The dual-receiver design of the SuperHitch also makes it easy to tow with your truck bed camper in place. The SuperTruss line of high-capacity hitch extenders is specially designed to extend the hitchreceiver back far enough to clear your bed-mounted camper, while still allowing for an excellent towing capacity.
Tow your small trailer with this completely hidden trailer hitch. Remove the ball mount for a fully concealed look when you're not towing. Use the included receiver attachment to mount a bike rack or cargo carrier. ... This hitch also comes with a removable 2" square receiver, which can be used to mount any variety of hitch accessories, like your bike rack or cargo carrier.
Filters
