Dim or dead amber lights make your trailer harder to see from the front and sides. This LED upgrade replaces older incandescent fixtures and helps keep your rig visible, compliant, and ready for the next trip without constant bulb swaps.Specs Light: Function: LED marker/clearancelight, PC rated (FMVSS P2 PC) LEDs: 16 Color: amber lens Overall dimensions: 5-3/4" long x2" tall x 1-3/8" deep Mounting hole centers: 4-13/16" Construction: Housing and lens material: polycarbonate Construction: sealed, waterproof unit Electrical: Voltage: 12V DC Amp draw: 0.248A at 12.8V Wiring: hard wired, 2 wire (black = power, white = ground) Compliance And Warranty: Meets FMVSS P2 PC requirements Warranty: lifetime LED warranty
4" x 2" Rectangle. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing with white base. ... Features: LED trailer light functions as a clearance or side marker light when properly mounted Built-in reflex reflector removes the need for a separate reflector LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable white ABS housing and acrylic lens Red lens over white LEDs Compatible with 12V DC systems Surface mount to trailer - hardware not included 2-Wire pigtail with power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 4" long x2" tall x 1" deep Distance between mounting holes (center on center): 3" Diodes: 3 Power draw at 12.8V: 0.06 amps Lifetime warranty on LEDs P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
4" x 2" Rectangle. Trailer light serves as either a clearance or side marker light. Built-in reflex reflector. Durable black ABS plastic base. Surface mount to trailer - hardware not included. 2-Wire pigtail. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearancelight, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearancelight and one as a side marker light.
4" x 2" Rectangle. Trailer light serves as either a clearance or side marker light. Built-in reflex reflector. Durable black ABS plastic base. Surface mount to trailer - hardware not included. 2-Wire pigtail. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearancelight, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearancelight and one as a side marker light.
3-3/4" x 1-3/4". Trailer light with reflector functions as a clearance or side marker light. Durable polycarbonate base and lens. ... Features: Small, rectangular trailer light functions as either a clearance or side marker light Built-in reflex reflector removes the need for a separate reflector LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate base with acrylic lens Amber lens with amber LEDs Compatible with 12V DC systems Mounts on surface of trailer - hardware not included 2-Wire pigtail includes power lead and ground wire P2 rated light produces a 90-degree beam pattern DOT and SAE compliant Assembled in the USA Specs: Overall dimensions: 3-3/4" long x 1-3/4" wide x 15/16" deep Distance between mounting holes (center to center): 3" Diodes: 2 Power draw at 12V: 0.05 amps Wire length: 4-1/2" 1-Year limited warranty P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
4" x 1-1/2" Rectangle. Waterproof, LED trailer light serves as either a clearance or side marker light. Built-in reflex reflector. Durable ABS housing. Surface mount to trailer - hardware not included. 1-Wire design. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearancelight, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearancelight and one as a side marker light.
3-11/16" x 13/16" Rectangle. Waterproof, LED trailer light serves as either a side marker or a clearancelight when properly mounted. Clear lens over amber LEDs. Surface mount to trailer. Self-grounding pigtail connector. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearancelight, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearancelight and one as a side marker light.
3-3/4" x 1-13/16" Oval. Low-profile trailer light serves as either a side marker or clearancelight. Built-in reflex reflector. ... Features: Oval trailer light can function as either a clearance or side marker light Built-in reflex reflector eliminates the need for a separate reflector LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate snap-on lens and housing Red lens over white LED Compatible with 12V DC systems Surface mount to trailer - hardware not included 2-Wire pigtail hardwires into trailer P2 rated light produces a 90-degree beam pattern Specs: Quantity: 1 clearance/marker light Dimensions: 3-3/4" long x 1-13/16" tall x3/8" deep Distance between mounting holes (center on center): 2-11/16" Diodes: 1 Power draw at 12V: 0.073 amps Lifetime warranty on LEDs P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
3-3/4" x2-1/16" Rectangle. Incandescent trailer light serves as either a side marker or clearancelight. Built-in reflex reflector. ... Features: Rectangular trailer light functions as a side marker or clearancelight when properly mounted Built-in reflex reflector eliminates the need for a separate reflector Incandescent bulb can be easily replaced Durable ABS black plastic base Screw-on acrylic lens Surface mounts on trailer - hardware not included Single-wire design grounds through the mounting hardware P2 rated Specs: Dimensions: 3-3/4" long x2-1/16" tall x 15/16" thick Distance between mounting holes (center on center): 3-1/4" Bulb type: incandescent Power draw at 12.8 volts: 0.2 amps 3-Year warranty P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
This PC-rated light functions as both a marker and clearancelight when mounted properly at a 45 degree angle. The red light measures 3-1/2" long x2-3/4" wide x 1-11/16" deep.
3-7/8" x 1-1/4" x 7/8". Waterproof, LED trailer light serves as a side marker light or a clearancelight. GloLight lens creates a solid panel of light. Wiring and bracket (sold separately) for installation. ... So this type of light can be used as either a side marker light or a clearancelight, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearancelight and one as a side marker light.
3-7/8" x 1-1/4" x 7/8". Waterproof, LED trailer light serves as a side marker light or a clearancelight. GloLight lens creates a solid panel of light. Wiring and bracket (sold separately) for installation. ... So this type of light can be used as either a side marker light or a clearancelight, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearancelight and one as a side marker light.
3/4" Diameter x 7/8". Waterproof, LED trailer light serves as a side marker light or a clearancelight. GloLight lens creates a solid panel of light. ... So this type of light can be used as either a side marker light or a clearancelight, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearancelight and one as a side marker light.
3/4" Diameter x 7/8". Waterproof, LED trailer light serves as a side marker light or a clearancelight. GloLight lens creates a solid panel of light. ... Features: Small, round trailer light can function as both a clearancelight and a side marker light when properly mounted GloLight lens creates a solid light pattern with a smooth appearance Sealed, waterproof construction is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock, moisture and vibration Allows improved heat distribution and thinner construction LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Red lens over white LEDs Durable polycarbonate housing and acrylic lens Recessed mount with included grommet Installation requires a 3/4" hole at desired location 2-Wire pigtail - includes power lead and ground wire Wire leads come with female 0.156 female barrels DOT compliant PC rated Specs: Quantity: 1 clearance/marker light Diodes: 2 Dimensions: 3/4" diameter x 7/8" deep Power draw at 12.8 volts: 0.052 amps Lifetime warranty on LEDs Innovative GloLight Design This red LED light serves as either a side marker light or a clearancelight.
3/4" Diameter x 7/8". Waterproof, LED trailer light serves as a side marker light or a clearancelight. GloLight lens creates a solid panel of light. ... Features: Small, round trailer light can function as both a clearancelight and a side marker light when properly mounted GloLight lens creates a solid light pattern with a smooth appearance Sealed, waterproof construction is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock, moisture and vibration Allows improved heat distribution and thinner construction LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Amber lens over white LEDs Durable polycarbonate housing and acrylic lens Recessed mount with grommet (A11GB - sold separately) Installation requires a 3/4" hole at desired location 2-Wire pigtail - includes power lead and ground wire DOT compliant PC rated Specs: Quantity: 1 clearance/marker light Diodes: 2 Dimensions: 3/4" diameter x 7/8" deep Power draw at 12.8 volts: 0.047 amps Lifetime warranty on LEDs Innovative GloLight Design This amber LED light serves as either a side marker light or a clearancelight.
1-11/16" Round. Waterproof trailer light serves as either a side marker or clearancelight. Smooth, bright outer ring of light offers a unique look - chrome bezel sold separately. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearancelight, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearancelight and one as a side marker light.
1-11/16" Round. Waterproof trailer light serves as either a side marker or clearancelight. Smooth, bright outer ring of light offers a unique look - chrome bezel sold separately. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearancelight, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearancelight and one as a side marker light.
1-11/16" Round. Waterproof trailer light serves as either a side marker or clearancelight. Smooth, bright outer ring of light offers a unique look - chrome bezel sold separately. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearancelight, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearancelight and one as a side marker light.
1-11/16" Round. Waterproof trailer light serves as either a side marker or clearancelight. Smooth, bright outer ring of light offers a unique look - chrome bezel sold separately. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearancelight, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearancelight and one as a side marker light.
6-3/8" Oval. Waterproof trailer light serves as either a side marker or clearancelight. Smooth, bright outer ring of light offers a unique look - chrome bezel sold separately. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearancelight, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearancelight and one as a side marker light.
6-3/8" Oval. Waterproof trailer light serves as either a side marker or clearancelight. Smooth, bright outer ring of light offers a unique look - chrome bezel sold separately. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearancelight, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearancelight and one as a side marker light.
4" Oval. Waterproof trailer light serves as either a side marker or clearancelight. Smooth, bright outer ring of light offers a unique look - chrome bezel sold separately. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearancelight, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearancelight and one as a side marker light.
1-5/8" x 7/16" Oblong. Waterproof, mini LED trailer light functions as a clearance and side marker light when mounted. Durable polycarbonate housing and lens. Surface mount to trailer - hardware not included. 2-Wire design.Features: LED light functions as both a side marker and clearancelight when mounted Sonically sealed, waterproof housing and lens unit is submersible LED lights are highly efficient, durable, and long-lasting Durable polycarbonate lens and housing Compatible with 12V DC systems 2-wire pigtail Surface mount - no hardware included Specs: Dimensions: 1-5/8" long x 7/16" tall x3/4" thick LED Color: Red Lens color: Clear Diodes: 1 Voltage: 12V Lifetime warranty on LEDs
1-5/8" x 7/16" Oblong. Waterproof, mini LED trailer light functions as a clearance and side marker light when mounted. Durable polycarbonate housing and lens. Surface mount to trailer - hardware not included. 2-Wire design.Features: LED light functions as both a side marker and clearancelight when mounted Sonically sealed, waterproof housing and lens unit is submersible LED lights are highly efficient, durable, and long-lasting Durable polycarbonate lens and housing Compatible with 12V DC systems 2-wire pigtail Surface mount - no hardware included Specs: Dimensions: 1-5/8" long x 7/16" tall x3/4" thick LED Color: Red Lens color: Red Diodes: 1 Voltage: 12V Lifetime warranty on LEDs
Filters
