Replaces 2 inch diameter cap for your Lippert Components trailer jack. Includes one replacement cap.Features: Replaces 2 inch diameter cap on trailer jack Includes 1 cap
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 5.5K.An inner drop leg on each jack makes leveling easy by allowing the jack feet to reach the ground quickly and at varying heights, saving time and thus reducing the draw on the trailer's battery. The cage pins that secure the drop legs can be replaced with spring-loaded pull pins (LG-119113 - sold separately) that allow for single-handed operation. Large, rectangular, pivoting footpads are included, but you can use larger, 9-inch-diameter pads (LG-210475 - sold separately) instead if you often camp on soft ground.
Having two motors gives you more leveling control when setting up camp on uneven ground. 74" Bracket height when extended. 3 Universal mount weld stops let you choose how to orient the new legs. Total lift includes 17" of drop leg travel.Even when the power is on, the Ultra-Fab Deluxe landing gear has a screw travel rate of 1 inch every 15 seconds. In total, that means extending the full 21inches would take you about 5 minutes. Fortunately, the 17 inches of drop leg travel should help to reduce some of that time.
Keep your camper in tip-top shape with these slide-out supports. Extendable struts work in tandem to keep your slide out level and to prevent sagging and damage to your RV's extension tubes. Quick-release handles make mounting a snap.Features: 2 Adjustable supports mount between the ground and the frame of your motor home's slide out Reduces slide-out sag Prevents damage to RV frame and extension tubes Quick-release handle for simple height adjustment Press button to release inner tube Pull tube up until U-channel bracket hits slide-out frame Turn handle to fine-tune U-Channel brackets straddle frame member for secure positioning Heavy-duty steel construction Specs: Height: 21" - 37" U-Channel inside bracket width: 4-3/4" U-Channel outside bracket width: 5" U-Channel bracket height: 1-3/8" U-Channel front to back bracket length: 2-1/2" Quantity: 2 supports Combined weight capacity: 1,400 lbs Lifetime warranty
Rust-resistant jack has a retracted height of 11" and an extended height of 21-1/2". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin lets you swivel the jack up for travel and down for use.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Retaining-ring swivel design lets you swing jack up for storage, down for use Deep-seated ring ensures extra side-load support Convenient 1/2", spring-loaded pull pin secures and releases jack Topwind handle has claw grip for comfortable, easy cranking Easily folds away for storage Corrosion-resistant finishes Outer tube has durable black powder coat Inner tube and footplate have rust-resistant clear zinc finish Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Bolt-on mounting bracket included Specs: Application: trailer frames with a height from 2" to 4" No more than 3" wide Bracket height Retracted: 11" Extended: 21-1/2" Lift: 10-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Handle radius: 7-3/4" Lift capacity: 2,000 lbs 1-Year warranty
Rust-resistant jack has a retracted height of 11" and an extended height of 21-1/2". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin lets you swivel the jack up for travel and down for use.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Retaining-ring swivel design lets you swing jack up for storage, down for use Deep-seated ring ensures extra side-load support Convenient 1/2", spring-loaded pull pin secures and releases jack Topwind handle has red claw grip for comfortable, easy cranking Easily folds away for storage Corrosion-resistant clear zinc finish for durability Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on mounting bracket included Specs: Bracket height (from bottom of foot to center of mounting plate): 11" Retracted 21-1/2" Extended Lift: 10-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Mounting bracket dimensions: 5" long x 4-1/4" wide Handle radius: 7-3/4" Lift capacity: 2,000 lbs 1-Year warranty
This hitch lock can fit in both 1/2" and 5/8" receiver holes and has a dust cap to block out dirt and moisture. Its stainless steel construction makes it extra rustproof. Includes 2 keys.
Give your 5th-wheel trailer or camper some new legs! 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately).Measurements to Know Before Replacing Your Landing Gear You should be able to swap out or upgrade your current landing gear a new set--even it's from a different brand name--as long as you get the following 3 measurements right: Distance between the weld stops, from inside to inside Distance between the weld stops, from outside to outside The overall length of the outer tube, including the cap Each weld stop is usually about 1" wide, so if you get measurement 1), just add 2 inches. How to Determine the Support Capacity You Need in Your Landing Gear Landing gear stabilizes about 25% of your trailer's total weight when it's loaded with cargo.
Just the bones - replacement setup comes with everything but the electrical. Measures 15-1/2" between weld stops. 16" of drop leg makes up almost half of the total lift. Get your 5th wheel back into action!Measurements to Know Before Replacing Your Landing Gear You should be able to swap out or upgrade your current landing gear a new set--even it's from a different brand name--as long as you get the following 3 measurements right: Distance between the weld stops, from inside to inside Distance between the weld stops, from outside to outside The overall length of the outer tube, including the cap Each weld stop is usually about 1" wide, so if you get measurement 1), just add 2 inches. How to Determine the Support Capacity You Need in Your Landing Gear Landing gear stabilizes about 25% of your trailer's total weight when it's loaded with cargo.
Give your 5th-wheel trailer or camper some new legs! 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately).Measurements to Know Before Replacing Your Landing Gear You should be able to swap out or upgrade your current landing gear a new set--even it's from a different brand name--as long as you get the following 3 measurements right: Distance between the weld stops, from inside to inside Distance between the weld stops, from outside to outside The overall length of the outer tube, including the cap Each weld stop is usually about 1" wide, so if you get measurement 1), just add 2 inches. How to Determine the Support Capacity You Need in Your Landing Gear Landing gear stabilizes about 25% of your trailer's total weight when it's loaded with cargo.
Give your 5th-wheel trailer or camper some new legs! Upgraded motor works nearly twice as fast as the standard 80 RPM base model. Outer tubes are 29-1/2" long with 15-1/2" between weld stops. Total lift includes 16" of drop leg.Features: Replacement landing gear kit for a manual or battery-powered setup Components can replace most Lippert (LCI), Atwood, Venture, etrailer, or Pac-Rim parts Cross shaft extends to fit your application Manual hand crank (included) lets you operate in case of power failure Drop leg travel reduces time spent cranking, adjusting, or holding buttons Upgrade to plunger pins (LG-119113 - sold separately) for fast and easy deployment Toggle switch will be right at home with your current electrical setup Fuse-protected wires - won't interfere with your camper's electrical IP-rated - can be mounted safely near propane tanks Excellent stability and support Large, rectangular footplates minimize sinking in soft ground Durable, sturdy steel construction Corrosion-resistant black powder coat finish Bolt-on installation - uses your existing mounting brackets Weld stops are located on both sides of the legs - universal mount Hardware and additional mounting brackets are included if you need them Made in the USA Specs: Combined weight capacity: 6,000 lbs Total lift: 37" Screw travel: 21" Drop leg travel: 16" Overall outer tube length: 29-1/2" Extendable cross shaft: Minimum: 41" Maximum: 71" Footplate dimensions: 5" long x 7-15/16" wide RPM at full capacity (5,000 lbs, 30 amps): 150 90-Day warranty Measurements to Know When Replacing Your Landing Gear Distance between weld stops (inside to inside) Overall length of the outer tube, including the cap Each weld stop is typically 1" wide, so for your third measurement, add 2 inches.
Designed for 2", 2-1/2", and 3" hitches, this lock has a covered keyhole and chrome plating to prevent corrosion. Steel construction ensures long-lasting dependability. Can be keyed alike to match other etrailer locks.
This heavy-duty jack leg is ready to get back on the job site! Front-facing plunger pin is easy to reach when using the adjustable drop leg. Lifts 5 tons supported by a strong carbon steel frame. Made in the USA.Features: Spring return retracts the jack hands-free Drop leg extension makes up about half of the total travel Cuts time spent cranking, adjusting, and leveling in half Easily-accessible front-facing plunger pin Helps to avoid reaching under the nose of your trailer frame to use the drop legs Works best if you have open space between your trailer and your truck Weather-resistant black paint coat finish Carbon steel construction Single speed gearbox is easy to maintain even in a long life of hard work Use the grease zerk fittings to help keep gears working smoothly Weld-on installation Includes standard footplate and sidewind crank Cross shaft sold separately Specs: Lift capacity: 10,000 lbs Support capacity : 12,000 lbs Lift: 12-3/8" Drop leg adjustment: 15" Total adjustment: 27-3/8" Overall height: Retracted: 27-1/2" Extended: 54-1/2" Outer tube width: 4" Inner tube width: 3-3/4" Distance between drop leg adjustment holes: 3-3/8" on center Number of adjustment holes: 5 Foot plate dimensions: 8-1/2" x 8-1/2" How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 6.5K.An inner drop leg on each jack makes leveling easy by allowing the jack feet to reach the ground quickly and at varying heights, saving time and thus reducing the draw on the trailer's battery. The cage pins that secure the drop legs can be replaced with spring-loaded pull pins (LG-119113 - sold separately) that allow for single-handed operation. Large, rectangular, pivoting footpads are included, but you can use larger, 9-inch-diameter pads (LG-210475 - sold separately) instead if you often camp on soft ground.
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 6.5K.An inner drop leg on each jack makes leveling easy by allowing the jack feet to reach the ground quickly and at varying heights, saving time and thus reducing the draw on the trailer's battery. The cage pins that secure the drop legs can be replaced with spring-loaded pull pins (LG-119113 - sold separately) that allow for single-handed operation. Large, rectangular, pivoting footpads are included, but you can use larger, 9-inch-diameter pads (LG-210475 - sold separately) instead if you often camp on soft ground.
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 5.5K.An inner drop leg on each jack makes leveling easy by allowing the jack feet to reach the ground quickly and at varying heights, saving time and thus reducing the draw on the trailer's battery. The cage pins that secure the drop legs can be replaced with spring-loaded pull pins (LG-119113 - sold separately) that allow for single-handed operation. Large, rectangular, pivoting footpads are included, but you can use larger, 9-inch-diameter pads (LG-210475 - sold separately) instead if you often camp on soft ground.
This cushioned coupler replaces your existing gooseneck coupler to give you a softer ride that both you and your horses are going to appreciate. It does this without springs, airbags, bearings, or seals, meaning less maintenance and less hassle.Features: Built-in glides ensure smooth towing Limits chucking and jerking to give you better control Extends the life of your truck and trailer by minimizing wear and tear Minimal maintenance - no springs, airbags, compressors, bearings, or seals to adjust or replace Extension handle allows you to latch or unlatch the coupler from outside the truck bed Fail-safe latch ensures the coupler stays attached to the ball Add a padlock (sold separately) to protect against thieves Round tube slides into your existing outer gooseneck coupler tube Made of powder coated steel with interior polyurethane cushion Specs: Application: standard gooseneck trailers Ball size: 2-5/16" Gross towing weight: 30,000 lbs Vertical load limit (maximum tongue weight): 10,000 lbs Clearance from ball coupler to top of coupler box: 9" Tube diameter: 4" Tube height: 22" Overall height: 26" Extension handle length: 22" Notes: Do not use with pop-in gooseneck balls with levers Coupler box requires minimum of 10" clearance from the center of the ball in all directions A Solution for Rough Rides Have you ever hit a bump while towing and felt that road shock rattle you down to your bones?
Manual landing gear lets you jack up your fifth-wheel trailer quickly and easily. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity of set is 8,000 lbs.An inner drop leg on each jack makes leveling easy by allowing the jack feet to reach the ground quickly and at varying heights. The cage pins that secure the drop legs can be replaced with spring-loaded pull pins (LG-119113 - sold separately) that allow for single-handed operation. Large, rectangular, pivoting footpads are included, but you can use larger, 9-inch-diameter pads (LG-210475 - sold separately) instead if you often camp on soft ground.
This 1/2" diameter connector installs inside your RV or home water system to prevent backflow, keeping contaminants out of your fresh water. Heavy-duty brass body resists corrosion and internal stainless spring won't rust.Features: Connector installs inside the plumbing of your RV and allows water to flow in only one direction when hooked up to city water supply Prevents backflow into your potable water tank Helps to keep tanks from overflowing when hooked up to city water Heavy-duty, corrosion-resistant brass body with rustproof stainless spring Diameter: 1/2" NPT 2010 Compliant
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Premium zinc finish offers great rust protection. 10" lift and 7-1/2" drop leg.Fast, Easy Setup with Minimal Cranking Once you've arrived at your destination, setting up is a breeze thanks to the quick-release jack tube on the Ark Extreme jack. Just tug the spring-loaded handle to quickly drop the jack tube to your desired height. This handle allows you to set the jack in 1 of 4 positions. Once you have it as close to the ground as it will go, just rotate the crank handle on the front of the jack to fine-tune the height.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Premium zinc finish offers great rust protection. 7" lift and 5" drop leg.Fast, Easy Setup with Minimal Cranking Once you've arrived at your destination, setting up is a breeze thanks to the quick-release jack tube on the Ark Extreme jack. Just tug the spring-loaded handle to quickly drop the jack tube to your desired height. This handle allows you to set the jack in 1 of 3 positions. Once you have it as close to the ground as it will go, just rotate the crank handle on the front of the jack to fine-tune the height.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Premium zinc finish offers great rust protection. 10" lift and 7-1/2" drop leg.Fast, Easy Setup with Minimal Cranking Once you've arrived at your destination, setting up is a breeze thanks to the quick-release jack tube on the Ark Extreme jack. Just tug the spring-loaded handle to quickly drop the jack tube to your desired height. This handle allows you to set the jack in 1 of 4 positions. Once you have it as close to the ground as it will go, just rotate the crank handle on the front of the jack to fine-tune the height.
Ratcheting jack lets you inch your trailer into tight spaces. Designed in Australia to stand up to the rigors of the Outback. Easily tracks through mud and gravel and offers great rust protection. 10" lift and 7-11/16" drop leg.Fast, Easy Setup with Minimal Cranking Once you've arrived at your destination, setting up is a breeze thanks to the quick-release jack tube on the Ark Extreme jack. Just tug the spring-loaded handle to quickly drop the jack tube to your desired height. This handle allows you to set the jack in 1 of 4 positions. Once you have it as close to the ground as it will go, just rotate the crank handle on the front of the jack to fine-tune the height.
Stable, ratcheting jack lets you inch your trailer into tight spaces. Designed in Australia to stand up to the rigors of the Outback. Easily tracks through mud and gravel and offers great rust protection. 10" lift, 5-1/2" drop leg.Fast, Easy Setup with Minimal Cranking Once you've arrived at your destination, setting up is a breeze thanks to the quick-release jack tube on the Ark Extreme jack. Just tug the spring-loaded handle to quickly drop the jack tube to your desired height. This handle allows you to set the jack in 1 of 4 positions. Once you have it as close to the ground as it will go, just rotate the crank handle on the front of the jack to fine-tune the height.
Filters
