This P-trap installs under your sink, shower, or tub to prevent sewer gases from entering your RV or motorhome. The hubs slide onto sewer system pipes, and the union joint screws together to connect the 2 pieces of the P-trap.Features: P-trap fitting is part of your RV's sewer system Slip joint nuts creates watertight seal on 1-1/2" or 1-1/4" diameter pipes 1-1/2" Hub slides onto sewer system pipe and adheres with ABS solvent cement Installs under your sink, shower, or bathtub Prevents sewer gases from entering your RV or motorhome Union joint screws together to connect the 2 pieces of the P-trap Simple installation - slide hubs onto sewer system pipes Sturdy ABS plastic construction
Kit includes 1-1/2" tall front hangers, 1-1/4" tall rear hangers, 2-5/8" shackle straps and hardware for mounting springs to your 2,000-lb to 7,000-lb, single-axle trailer frame. ... Features: Attaches 2 leaf springs (sold separately) to your trailer frame Includes: (2) 1-1/2" Tall front hangers (2) 1-1/4" Tall rear hangers without bushings (4) 2-5/8" Long shackle straps (6) 3" Long x 9/16" diameter shackle bolts (6) 9/16" Diameter locknuts Designed for use on trailers with single, 2,000-lb to 7,000-lb axles Does not include components for mounting axle to springs
Kit includes 1-1/2" tall front hangers, 1-1/4" tall rear hangers, 3-1/8" shackle straps and hardware for mounting springs to your 2,000-lb to 7,000-lb, single-axle trailer frame. ... Features: Attaches 2 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location based on type of leaf springs Achieves 4" or 4-1/2" clearance between trailer frame and axle, depending on axle size Includes: (2) 1-1/2" Tall front hangers (2) 1-1/4" Tall rear hangers (4) 3-1/8" Long shackle straps (6) 3" Long x 9/16" diameter shackle bolts (6) 9/16" Diameter locknuts Designed for use on trailers with single, 2,000-lb to 7,000-lb axles Does not include components for mounting axle to springs Leaf Springs A - Distance Between Hangers B - Distance Between Center of Axle and Trailer Frame Axle Diameter SP-169275 (1020) 20" 4-1/2" 1-3/4" (typical 2,000-lb trailer axle) SP-219275 (PR722) SP-220275 (PR3) SP-218275 (PR4) SP-212275 (PR4B) SP-111275 (PR5) SP-198275 (PR6) 24-7/8" 4" 2-3/8" (typical 3,500-lb trailer axle) Note: The above table provides an indication of where the included hangers can be mounted on your trailer.
This P-trap installs under your sink, shower, or tub to prevent sewer gases from entering your RV or motorhome. The hubs slide onto sewer system pipes, and the union joint screws together to connect the 2 pieces of the P-trap.Features: P-trap fitting is part of your RV's sewer system Slip joint nuts creates watertight seal on 1-1/2" diameter pipes 1-1/2" Hub slides onto sewer system pipe and adheres with ABS solvent cement Installs under your sink, shower, or bathtub Prevents sewer gases from entering your RV or motorhome Union joint screws together to connect the 2 pieces of the P-trap Simple installation - slide hubs onto sewer system pipes Sturdy ABS plastic construction
Sturdy steel ball mount with solid shank measures 9-1/4" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. CNC-machined for clean, straight lines. ... Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitch receiver Ball platform provides mounting point for hitch ball (sold separately) Drawbar can be used in rise position only Sturdy steel construction with solid shank High-quality manufacturing process CNC-machined for strong, consistent cuts and welds 7-Stage washing method delivers smooth, clean surface Corrosion-resistant, black gloss powder coat finish Hitch pin and clip or hitch lock sold separately Assembled in the USA Specs: Application: 1-1/4" x 1-1/4" trailer hitch receivers Compatible with Class l and Class ll hitches Gross towing weight: 3,500 lbs Tongue weight: 350 lbs Length: 9-1/4" from center of hitch pin hole to center of ball hole Rise: 3-1/8" from top of inside of hitch opening Ball hole diameter: 3/4" Pin hole diameter: 1/2" Limited lifetime warranty
This P-trap installs under your sink, shower, or tub to prevent sewer gases from entering your RV or motorhome. The hubs slide onto sewer system pipes, and the union joint screws together to connect the 2 pieces of the P-trap.Features: P-trap fitting is part of your RV's sewer system Slip joint nuts creates watertight seal on 1-1/4" diameter pipes 1-1/2" Hub slides onto sewer system pipe and adheres with ABS solvent cement Installs under your sink, shower, or bathtub Prevents sewer gases from entering your RV or motorhome Union joint screws together to connect the 2 pieces of the P-trap Simple installation - slide hubs onto sewer system pipes Sturdy ABS plastic construction
Sturdy steel anti-rattle ball mount with a threaded hitch pin hole and solid shank measures 7-1/4" from center of hitch pin hole to center of ball hole. Powder coat finish is corrosion resistant.Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitch receiver Ball platform provides mounting point for hitch ball (sold separately) Both drop and rise positions available to ensure level towing Sturdy steel construction with solid shank Anti-rattle threaded hitch bolt and clip (included) reduces noise and movement Corrosion-resistant black powder coat finish Made in the USA Specs: Application: 1-1/4" x 1-1/4" trailer hitch receivers Gross towing weight: 3,500 lbs Tongue weight: 300 lbs Length: 7-1/4" from center of hitch pin hole to center of ball hole 3" From center of pin hole to support gusset Rise: 5-1/2" from top of inside of hitch opening Drop: 6" from top of inside of hitch opening Ball hole diameter: 3/4"
Staple works with a hasp (sold separately) to secure doors, gates, and lids. 3/16" Thick, corrosion-resistant stainless steel staple resists cutting, sawing, and hammering. Padlock sold separately.Features: Staple fits into a hasp or cutout to help secure doors, gates, and more Hasp and padlock sold separately 4-Hole mounting plate accommodates #8 screws Stainless steel construction provides superior corrosion resistance 3/16" Thick staple resists cutting, sawing, and hammering Specs: Staple diameter: 3/16" Opening dimensions: 9/16" wide x 5/8" tall Mounting plate dimensions: 1-1/2" long x 1-1/2" wide x 7/8" thick 1" From center of mounting hole to center of mounting hole horizontally 1" From center of mounting hole to center of mounting hole vertically Mounting hole diameter: 1/4" H115-204E Paneloc Staple - 4 Hole - Stainless Steel 115-1-1-3
Rubber bushing with steel sleeve is designed for use with trailer suspension systems. Designed for use with Dexter heavy-duty axles with 10K to 15K capacity. Insert into the eye of your leaf spring to ensure proper sizing for suspension bolts.Features: Rubber bushing with steel sleeve is designed for use with trailer suspension systems Designed for use with Dexter heavy-duty axles with 10,000-lb to 15,000-lb capacity Insert bushing into the eye of your leaf spring to ensure proper sizing for suspension bolts Specs: Inner diameter: 1-1/8" Outer diameter: 2-1/8" Length: 3-3/4" Quantity: 1 bushing Rubber bushing for trailer suspension equalizers Works for 10,000-lb to 15,000-lb Dexter heavy-duty axles Inner diameter: 1-1/8" Outer diameter: 2-1/8" Length: 3-3/4"
Slam latch is ideal for doors on trailers or sheds that you need to get into and out of quickly. Spring-loaded pin with reverse-angled tip automatically retracts into a keeper when you slam the door shut. Zinc-plated steel resists corrosion.Features: Slam latch is ideal for trailer and shed doors Spring-loaded pin with reverse-angled tip provides easy, hands-free latching action Angled tip allows pin to automatically retract when you slam door shut Spring forces pin into keeper Square shape of spring helps to prevent distortion and tangling Cover protects internal components of latch from damage and from the elements Delivers a clean appearance Rubber handle gives you a comfortable grip on the latch Zinc-plated steel construction provides corrosion resistance Specs: Latch dimensions: 1-1/2" long x 1-1/4" wide 3/4" From center of hole to center of hole horizontally 7/8" From center of hole to center of hole vertically Pin dimensions: 2-7/8" long x 3/8" wide Cover dimensions: 1-5/8" long x 1-3/8" wide 3/4" From center of mounting hole to center of mounting hole horizontally 7/8" From center of mounting hole to center of mounting hole vertically
2" Lubed Dust Cap and Rubber PlugFeatures: Fits EZ lube spindle Construction: 22 gauge, zinc coated steel Dimensions: 1.99" x 1.40" x 1.18" Includes rubber plug
Sturdy steel ball mount with solid shank measures 7" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitch receiver Ball platform provides mounting point for hitch ball (sold separately) Both drop and rise positions available to ensure level towing Sturdy steel construction with solid shank Black powder coat finish covers a-coat base for superior rust protection Hitch pin and clip included - hitch lock sold separately Specs: Application: 1-1/4" x 1-1/4" trailer hitch receivers Class II compatible only Gross towing weight: 3,500 lbs Tongue weight: 300 lbs Length: 7" from center of hitch pin hole to center of ball hole Rise: 5/8" from top of inside of hitch opening Drop: 1-1/4" from top of inside of hitch opening Ball hole diameter: 3/4" Pin hole diameter: 1/2" Limited lifetime warranty
Slam latch is ideal for doors on trailers or sheds that you need to get into and out of quickly. Spring-loaded pin with angled tip automatically retracts and springs into a keeper when you slam the door shut. Stainless steel resists corrosion.Features: Slam latch is ideal for trailer and shed doors Spring-loaded pin with angled tip provides easy, hands-free latching action Angled tip allows pin to automatically retract when you slam door shut Spring forces pin into keeper Square shape of spring helps to prevent distortion and tangling Cover protects internal components of latch from damage and from the elements Delivers a clean appearance Rubber handle gives you a comfortable grip on the latch Passivated stainless steel construction provides superior corrosion resistance Specs: Latch dimensions: 1-1/2" long x 1-1/4" wide 3/4" From center of hole to center of hole horizontally 7/8" From center of hole to center of hole vertically Pin dimensions: 2-7/8" long x 3/8" wide Cover dimensions: 1-5/8" long x 1-3/8" wide 3/4" From center of mounting hole to center of mounting hole horizontally 7/8" From center of mounting hole to center of mounting hole vertically F707-234P011 Paneloc Slam Latch Cover - Passivated Stainless Steel F707-204P Paneloc Slam Latch - Passivated Stainless Steel
Sturdy steel ball mount with a solid shank measures 7-1/4" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish is corrosion resistant.Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitch receiver Ball platform provides mounting point for hitch ball (sold separately) Both drop and rise positions available to ensure level towing Sturdy steel construction with solid shank Corrosion-resistant black powder coat finish Hitch pin and clip or hitch lock sold separately Specs: Application: 1-1/4" x 1-1/4" trailer hitch receivers Class II compatible only Gross towing weight: 3,500 lbs Tongue weight: 300 lbs Length: 7-1/4" from center of hitch pin hole to center of ball hole 3" From center of pin hole to support gusset Rise: 5-1/2" from top of inside of hitch opening Drop: 6" from top of inside of hitch opening Ball hole diameter: 3/4" Pin hole diameter: 1/2"
Features: Replacement grease seal helps ensure optimal performance from bearings and races Inner diameter 1.250" Outer diameter 1.785" Fits straight spindles measuring 1-1/8", specialty light duy spindles, and micro axles Includes 1 seal Use the Cross Reference to Match the Seal You Have Seal numbers are not always listed the same way across axle and hub brands, so the cross-reference data gives you another way to confirm the replacement before the hub comes apart.
When you pull your trailer down a gravel road or pull out after a full day at the lake, this rear hanger will support every mile. It holds your 2" slipper spring, so bumps and potholes dont get the best of your cargo.Specs Application: Rear hanger for slipper spring suspension Fits 2" wide slipper springs General: Overall dimensions: 1" long x 1-1/4" tall x 2-1/2" wide Inner width: 2-1/8"
This street elbow connects (2) 1-1/2" diameter sewer pipes in your RV or motor home. Elbow changes the direction of waste flow. Simply slide the pipes into either side of the elbow and secure with ABS solvent bond (A05-0303 - sold separately).Features: DWV street elbow connects 2 sewer pipes that move waste outside of your RV or motorhome Changes the direction of waste flow Works with 1-1/2" diameter pipes Simple installation Slide pipe into hub side of elbow Slide pipe onto spigot side of elbow Solvent bond with ABS solvent cement (A05-0303 - sold separately) Sturdy ABS plastic construction IAPMO listed as meeting or exceeding: ASTM -D2661-2011 CSA B181.1-2011 Specs: Hub diameter: Internal: 1-7/8" Spigot diameter: External: 2-1/4" 1-Year warranty
This street elbow connects (2) 1-1/2" diameter sewer pipes in your RV or motor home. Elbow changes the direction of waste flow. Simply slide the pipes into either side of the elbow and secure with ABS solvent bond (A05-0303 - sold separately).Features: DWV street elbow connects 2 sewer pipes that move waste outside of your RV or motorhome Changes the direction of waste flow Works with 1-1/2" diameter pipes Simple installation Slide pipe into hub side of elbow Slide pipe onto spigot side of elbow Solvent bond with ABS solvent cement (A05-0303 - sold separately) Sturdy ABS plastic construction IAPMO listed as meeting or exceeding: ASTM -D2661-2011 CSA B181.1-2011 Specs: Hub diameter: Internal: 1-7/8" Spigot diameter: External: 1-7/8" 1-Year warranty
... The nut slides over your sewer pipe, and the ferrule goes over the same pipe and sits in the nut. 1-1/2" Hub slides over separate pipe. Pieces thread together to join 2 pipes.Features: DWV trap adapter adapts a solvent weld connection to a slip-joint connection Nut slides over your sewer pipe Ferrule goes over the same pipe and sits within the nut 1-1/2" Hub slides over a separate sewer pipe Solvent bond with ABS solvent cement (A05-0303 - sold separately) Pieces thread together to join 2 separate pipes Sturdy ABS plastic construction IAPMO listed as meeting or exceeding: ASTM -D2661-2011 CSA B181.1-2011 Specs: Nut diameter (internal): 1-1/2" Hub diameter (internal): 1-7/8" 1-Year warranty
Slam latch is ideal for doors on trailers or sheds that you need to get into and out of quickly. Spring-loaded pin with angled tip automatically retracts and springs into a keeper when you slam the door shut. Stainless steel resists corrosion.Features: Slam latch is ideal for trailer and shed doors Spring-loaded pin with angled tip provides easy, hands-free latching action Angled tip allows pin to automatically retract when you slam door shut Spring forces pin into keeper Square shape of spring helps to prevent distortion and tangling Rubber handle gives you a comfortable grip on the latch Passivated stainless steel construction provides superior corrosion resistance Specs: Dimensions: 1-1/2" long x 1-1/4" wide 3/4" From center of hole to center of hole horizontally 7/8" From center of hole to center of hole vertically Pin dimensions: 2-7/8" long x 3/8" wide F707-204P Paneloc Slam Latch - Passivated Stainless Steel 707-C-O-Passivate
Slam latch is ideal for doors on trailers or sheds that you need to get into and out of quickly. Spring-loaded pin with angled tip automatically retracts and springs into a keeper when you slam the door shut. Zinc-plated steel resists corrosion.Features: Slam latch is ideal for trailer and shed doors Spring-loaded pin with angled tip provides easy, hands-free latching action Angled tip allows pin to automatically retract when you slam door shut Spring forces pin into keeper Square shape of spring helps to prevent distortion and tangling Rubber handle gives you a comfortable grip on the latch Zinc-plated steel construction provides corrosion resistance Specs: Latch dimensions: 1-1/2" long x 1-1/4" wide 3/4" From center of hole to center of hole horizontally 7/8" From center of hole to center of hole vertically Pin dimensions: 2-7/8" long x 3/8" wide F707-104Z Paneloc Slam Latch - Zinc Plated Steel 707-S-O-ZINC
Ideal for bolt-on applications, this butt hinge with a 1/8" pin and 4 mounting holes replaces the worn-out or damaged hinge on your small cabinet or panel. Non-removable pin ensures maximum security to keep your cargo safe.Features: Butt hinge replaces the hinge on your cabinet door or panel Most applications require multiple hinges (sold separately) 270-Degree rotation for full opening and closing motion Non-removable steel pin ensures maximum security to keep your cargo safe Prevents road vibration from knocking pin out of place Helps prevent tampering and removal of door Mounting plate with 4 mounting holes is ideal for bolt-on applications Stainless steel construction is rustproof and corrosion resistant Made in the USA Specs: Dimensions: 1-1/2" long x 1-1/2" wide x 1/16" thick Pin diameter: 1/8"
Slam latch is ideal for doors on trailers or sheds that you need to get into and out of quickly. Spring-loaded pin with reverse-angled tip automatically retracts into a keeper when you slam the door shut. Zinc-plated steel resists corrosion.Features: Slam latch is ideal for trailer and shed doors Spring-loaded pin with angled tip provides easy, hands-free latching action Reverse-angled tip allows pin to automatically retract when you slam door shut Spring forces pin into keeper Square shape of spring helps to prevent distortion and tangling Rubber handle gives you a comfortable grip on the latch Zinc-plated steel construction provides corrosion resistance Specs: Latch dimensions: 1-1/2" long x 1-1/4" wide 3/4" From center of hole to center of hole horizontally 7/8" From center of hole to center of hole vertically Pin dimensions: 2-7/8" long x 3/8" wide
Filters
