P-Trap Fitting - Union Joint - ABS Plastic - 1-1/2" Slip Joint - 1-1/2" Hub

Video Transcript for P-Trap Fitting: The Breakdown

Hi everybody. Andy here with etrailer.com. Let's take a brief look together at this P-trap fitting. Now this is going to install under your sink, your shower or bathtub as part of your RV sewer system to prevent sewer gases from entering into your RV or motor home. And this features a sturdy ABS plastic construction. And this is going to be relatively easy to install.

This one and a half inch hub will slide right onto your sewer system pipe, and then it will adhere with the ABS solvent cement that you see there on your screen. So if you don't already have some, you can take that item number that you see there on your screen, pop that into the search field of our website. That will take you to that solvent cement, and you can add that to your order if you are in need of it. But as you know, that cement is going to give you a tight seal so you're not gonna have to worry about anything leaking. And then this slip joint nut will create a watertight seal on your one and a half inch diameter pipe.

And then the union joint here will screw together to connect the two pieces, your one and a half inch hub and your slip nut joint. It's going to allow you to configure this in whichever orientation is going to be best for you in your setup. And tighten that down here. So if you are needing to replace or add a P-trap fitting to your RV or motor home's sewer system, and this is looking for a fitting to slip onto your one and a half inch hub and work with your one and a half inch in diameter pipes, this is gonna be exactly what you need. That's gonna wrap up our real quick look today.

I do hope that our time together was helpful for you. Again, my name is Andy, thank you for joining me.