This P-trap installs under your sink, shower, or tub to prevent sewer gases from entering your RV or motorhome. The hubs slide onto sewer system pipes, and the union joint screws together to connect the 2 pieces of the P-trap.Features: P-trap fitting is part of your RV's sewer system Slip joint nuts creates watertight seal on 1-1/2" or 1-1/4" diameter pipes 1-1/2" Hub slides onto sewer system pipe and adheres with ABS solvent cement Installs under your sink, shower, or bathtub Prevents sewer gases from entering your RV or motorhome Union joint screws together to connect the 2 pieces of the P-trap Simple installation - slide hubs onto sewer system pipes Sturdy ABS plastic construction
Kit includes 1-1/2" tall front hangers, 1-1/4" tall rear hangers, 2-5/8" shackle straps and hardware for mounting springs to your 2,000-lb to 7,000-lb, single-axle trailer frame. ... Features: Attaches 2 leaf springs (sold separately) to your trailer frame Includes: (2) 1-1/2" Tall front hangers (2) 1-1/4" Tall rear hangers without bushings (4) 2-5/8" Long shackle straps (6) 3" Long x 9/16" diameter shackle bolts (6) 9/16" Diameter locknuts Designed for use on trailers with single, 2,000-lb to 7,000-lb axles Does not include components for mounting axle to springs
Kit includes 1-1/2" tall front hangers, 1-1/4" tall rear hangers, 3-1/8" shackle straps and hardware for mounting springs to your 2,000-lb to 7,000-lb, single-axle trailer frame. ... Features: Attaches 2 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location based on type of leaf springs Achieves 4" or 4-1/2" clearance between trailer frame and axle, depending on axle size Includes: (2) 1-1/2" Tall front hangers (2) 1-1/4" Tall rear hangers (4) 3-1/8" Long shackle straps (6) 3" Long x 9/16" diameter shackle bolts (6) 9/16" Diameter locknuts Designed for use on trailers with single, 2,000-lb to 7,000-lb axles Does not include components for mounting axle to springs Leaf Springs A - Distance Between Hangers B - Distance Between Center of Axle and Trailer Frame Axle Diameter SP-169275 (1020) 20" 4-1/2" 1-3/4" (typical 2,000-lb trailer axle) SP-219275 (PR722) SP-220275 (PR3) SP-218275 (PR4) SP-212275 (PR4B) SP-111275 (PR5) SP-198275 (PR6) 24-7/8" 4" 2-3/8" (typical 3,500-lb trailer axle) Note: The above table provides an indication of where the included hangers can be mounted on your trailer.
Sturdy steel ball mount with a solid shank measures 7-1/4" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish is corrosion resistant.Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitch receiver Ball platform provides mounting point for hitch ball (sold separately) Both drop and rise positions available to ensure level towing Sturdy steel construction with solid shank Corrosion-resistant black powder coat finish Hitch pin and clip or hitch lock sold separately Specs: Application: 1-1/4" x 1-1/4" trailer hitch receivers Class II compatible only Gross towing weight: 3,500 lbs Tongue weight: 300 lbs Length: 7-1/4" from center of hitch pin hole to center of ball hole 3" From center of pin hole to support gusset Rise: 5-1/2" from top of inside of hitch opening Drop: 6" from top of inside of hitch opening Ball hole diameter: 3/4" Pin hole diameter: 1/2"
This P-trap installs under your sink, shower, or tub to prevent sewer gases from entering your RV or motorhome. The hubs slide onto sewer system pipes, and the union joint screws together to connect the 2 pieces of the P-trap.Features: P-trap fitting is part of your RV's sewer system Slip joint nuts creates watertight seal on 1-1/2" diameter pipes 1-1/2" Hub slides onto sewer system pipe and adheres with ABS solvent cement Installs under your sink, shower, or bathtub Prevents sewer gases from entering your RV or motorhome Union joint screws together to connect the 2 pieces of the P-trap Simple installation - slide hubs onto sewer system pipes Sturdy ABS plastic construction
This P-trap installs under your sink, shower, or tub to prevent sewer gases from entering your RV or motorhome. The hubs slide onto sewer system pipes, and the union joint screws together to connect the 2 pieces of the P-trap.Features: P-trap fitting is part of your RV's sewer system Slip joint nuts creates watertight seal on 1-1/4" diameter pipes 1-1/2" Hub slides onto sewer system pipe and adheres with ABS solvent cement Installs under your sink, shower, or bathtub Prevents sewer gases from entering your RV or motorhome Union joint screws together to connect the 2 pieces of the P-trap Simple installation - slide hubs onto sewer system pipes Sturdy ABS plastic construction
Sturdy steel anti-rattle ball mount with a threaded hitch pin hole and solid shank measures 7-1/4" from center of hitch pin hole to center of ball hole. Powder coat finish is corrosion resistant.Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitch receiver Ball platform provides mounting point for hitch ball (sold separately) Both drop and rise positions available to ensure level towing Sturdy steel construction with solid shank Anti-rattle threaded hitch bolt and clip (included) reduces noise and movement Corrosion-resistant black powder coat finish Made in the USA Specs: Application: 1-1/4" x 1-1/4" trailer hitch receivers Gross towing weight: 3,500 lbs Tongue weight: 300 lbs Length: 7-1/4" from center of hitch pin hole to center of ball hole 3" From center of pin hole to support gusset Rise: 5-1/2" from top of inside of hitch opening Drop: 6" from top of inside of hitch opening Ball hole diameter: 3/4"
This street elbow connects (2) 1-1/2" diameter sewer pipes in your RV or motor home. Elbow changes the direction of waste flow. Simply slide the pipes into either side of the elbow and secure with ABS solvent bond (A05-0303 - sold separately).Features: DWV street elbow connects 2 sewer pipes that move waste outside of your RV or motorhome Changes the direction of waste flow Works with 1-1/2" diameter pipes Simple installation Slide pipe into hub side of elbow Slide pipe onto spigot side of elbow Solvent bond with ABS solvent cement (A05-0303 - sold separately) Sturdy ABS plastic construction IAPMO listed as meeting or exceeding: ASTM -D2661-2011 CSA B181.1-2011 Specs: Hub diameter: Internal: 1-7/8" Spigot diameter: External: 2-1/4" 1-Year warranty
Rubber bushing with steel sleeve is designed for use with trailer suspension systems. Designed for use with Dexter heavy-duty axles with 10K to 15K capacity. Insert into the eye of your leaf spring to ensure proper sizing for suspension bolts.Features: Rubber bushing with steel sleeve is designed for use with trailer suspension systems Designed for use with Dexter heavy-duty axles with 10,000-lb to 15,000-lb capacity Insert bushing into the eye of your leaf spring to ensure proper sizing for suspension bolts Specs: Inner diameter: 1-1/8" Outer diameter: 2-1/8" Length: 3-3/4" Quantity: 1 bushing Rubber bushing for trailer suspension equalizers Works for 10,000-lb to 15,000-lb Dexter heavy-duty axles Inner diameter: 1-1/8" Outer diameter: 2-1/8" Length: 3-3/4"
This street elbow connects (2) 1-1/2" diameter sewer pipes in your RV or motor home. Elbow changes the direction of waste flow. Simply slide the pipes into either side of the elbow and secure with ABS solvent bond (A05-0303 - sold separately).Features: DWV street elbow connects 2 sewer pipes that move waste outside of your RV or motorhome Changes the direction of waste flow Works with 1-1/2" diameter pipes Simple installation Slide pipe into hub side of elbow Slide pipe onto spigot side of elbow Solvent bond with ABS solvent cement (A05-0303 - sold separately) Sturdy ABS plastic construction IAPMO listed as meeting or exceeding: ASTM -D2661-2011 CSA B181.1-2011 Specs: Hub diameter: Internal: 1-7/8" Spigot diameter: External: 1-7/8" 1-Year warranty
Sturdy steel ball mount with solid shank measures 7" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitch receiver Ball platform provides mounting point for hitch ball (sold separately) Both drop and rise positions available to ensure level towing Sturdy steel construction with solid shank Black powder coat finish covers a-coat base for superior rust protection Hitch pin and clip included - hitch lock sold separately Specs: Application: 1-1/4" x 1-1/4" trailer hitch receivers Class II compatible only Gross towing weight: 3,500 lbs Tongue weight: 300 lbs Length: 7" from center of hitch pin hole to center of ball hole Rise: 5/8" from top of inside of hitch opening Drop: 1-1/4" from top of inside of hitch opening Ball hole diameter: 3/4" Pin hole diameter: 1/2" Limited lifetime warranty
When you pull your trailer down a gravel road or pull out after a full day at the lake, this rear hanger will support every mile. It holds your 2" slipper spring, so bumps and potholes dont get the best of your cargo.Specs Application: Rear hanger for slipper spring suspension Fits 2" wide slipper springs General: Overall dimensions: 1" long x 1-1/4" tall x 2-1/2" wide Inner width: 2-1/8"
... The nut slides over your sewer pipe, and the ferrule goes over the same pipe and sits in the nut. 1-1/2" Hub slides over separate pipe. Pieces thread together to join 2 pipes.Features: DWV trap adapter adapts a solvent weld connection to a slip-joint connection Nut slides over your sewer pipe Ferrule goes over the same pipe and sits within the nut 1-1/2" Hub slides over a separate sewer pipe Solvent bond with ABS solvent cement (A05-0303 - sold separately) Pieces thread together to join 2 separate pipes Sturdy ABS plastic construction IAPMO listed as meeting or exceeding: ASTM -D2661-2011 CSA B181.1-2011 Specs: Nut diameter (internal): 1-1/2" Hub diameter (internal): 1-7/8" 1-Year warranty
Sturdy steel ball mount with solid shank measures 9-1/4" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. CNC-machined for clean, straight lines. ... Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitch receiver Ball platform provides mounting point for hitch ball (sold separately) Drawbar can be used in rise position only Sturdy steel construction with solid shank High-quality manufacturing process CNC-machined for strong, consistent cuts and welds 7-Stage washing method delivers smooth, clean surface Corrosion-resistant, black gloss powder coat finish Hitch pin and clip or hitch lock sold separately Assembled in the USA Specs: Application: 1-1/4" x 1-1/4" trailer hitch receivers Compatible with Class l and Class ll hitches Gross towing weight: 3,500 lbs Tongue weight: 350 lbs Length: 9-1/4" from center of hitch pin hole to center of ball hole Rise: 3-1/8" from top of inside of hitch opening Ball hole diameter: 3/4" Pin hole diameter: 1/2" Limited lifetime warranty
Kit includes 3-1/4" tall front hangers, 1-1/4" tall rear hangers, 3-1/8" shackle straps and hardware for mounting springs to your 2,000-lb to 7,000-lb, single-axle trailer frame. ... Features: Attaches 2 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location based on type of leaf springs Achieves 5" or 5-1/2" clearance between trailer frame and axle, depending on axle size Includes: (2) 3-1/4" Tall front hangers (2) 1-1/4" Tall rear hangers (4) 3-1/8" Long shackle straps (6) 3" Long x 9/16" diameter shackle bolts (6) 9/16" Diameter locknuts Designed for use on trailers with single, 2,000-lb to 7,000-lb axles Does not include components for mounting axle to springs Leaf Springs A - Distance Between Hangers B - Distance Between Center of Axle and Trailer Frame Axle Diameter SP-169275 (1020) 20" 5-1/2" 1-3/4" (typical 2,000-lb trailer axle) SP-219275 (PR722) SP-220275 (PR3) SP-218275 (PR4) SP-212275 (PR4B) SP-111275 (PR5) SP-198275 (PR6) 24-7/8" 5" 2-3/8" (typical 3,500-lb trailer axle) Note: The above table provides an indication of where the included hangers can be mounted on your trailer.
Leaf-spring mounting kit includes 1-1/2" tall front hangers, 2-1/2" tall center hangers, 1-1/2" tall rear hangers and necessary hardware. Equalizers are 7-3/4" long. ... Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location based on type of leaf springs Achieves 3-1/2" or 3-3/4" clearance between trailer frame and axle, depending on axle size Includes: (4) 1-1/2" Tall front and rear hangers (2) 2-1/2" Tall center hangers (2) 7-3/4" Long curved equalizers (8) 2-5/8" Long shackle straps (14) 3" Long x 9/16" diameter shackle bolts (14) 9/16" Diameter locknuts Designed for use on trailers with tandem, 2,000-lb to 7,000-lb axles Does not include components for mounting axle to springs Leaf Springs A - Distance Between Front and Center Hangers B - Distance Between Center and Rear Hangers C - Distance Between U-Bolts D - Distance Between Center of Axle and Trailer Frame Axle Diameter SP-169275 (1020) 24-3/4" 24-3/4" 30" 3-3/4" 1-3/4" (typical 2,000-lb trailer axle) SP-219275 (PR722) SP-220275 (PR3) SP-218275 (PR4) SP-212275 (PR4B) SP-111275 (PR5) SP-198275 (PR6) 29-1/2" 29-1/2" 33-1/2" 3-1/2" 2-3/8" (typical 3,500-lb trailer axle) Note: The above table provides an indication of where the included hangers can be mounted on your trailer.
Leaf-spring mounting kit includes 1-1/2" tall front hangers, 2-1/2" tall center hangers, 1-1/2" tall rear hangers, and necessary hardware. Equalizers are 7-3/4" long. ... Features: Attaches 6 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location based on type of leaf springs Achieves 3-1/2" or 4-1/2" clearance between trailer frame and axle, depending on axle size Includes: (4) 1-1/2" Tall hangers (4) 2-1/2" Tall hangers (4) 7-3/4" Long curved equalizers (16) 2-5/8" Long shackle straps (24) 3" Long x 9/16" diameter shackle bolts (24) 9/16" Diameter locknuts Designed for use on trailers with triple, 2,000-lb to 7,000-lb axles Does not include components for mounting axle to springs Leaf Springs A - Distance Between Front and 1st-Center Hangers B - Distance Between Center Hangers C - Distance Between 2nd-Center and Rear Hangers D - Distance Between U-Bolts E - Distance Between Center of Axle and Trailer Frame Axle Diameter SP-169275 (1020) 24-3/4" 29" 24-3/4" 28-1/2" 4-1/2" 1-3/4" (typical 2,000-lb trailer axle) SP-219275 (PR722) SP-220275 (PR3) SP-218275 (PR4) SP-212275 (PR4B) SP-111275 (PR5) SP-198275 (PR6) 29-1/2" 34" 29-1/2" 34" 3-1/2" 2-3/8" (typical 3,500-lb trailer axle) Note: The above table provides an indication of where the included hangers can be mounted on your trailer.
The thick channel plates and welded gusset on this steel ball mount make it perfect for heavy-duty use. Tow up to 10K with the 2" ball or 14K with the 2-5/16" ball. Adjustable design lets you tow trailers of various heights.And the zinc finish provides corrosion resistance. <> Setting Up the BulletProof Ball Mount To set up this BulletProof Hitches adjustable ball mount, insert the 2-1/2" x 2-1/2" shank into your hitch's receiver. Slide the 2-ball platform into the adjustable channel, then use the included pins and clips to secure the platform at the height you need.
Insert this shock-absorbing, adjustable mount into your hitch to get 5 stacked 2-1/2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 5 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories Shock-absorbing design ensures a smooth, steady ride Technology functions like a torsion axle to limit transfer of road shock from trailer to vehicle and vice versa No airbags to maintain and fewer moving parts to repair or replace than with other shock-absorbing solutions Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitch receiver sold separately SAE J684 certified Made in the USA Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Built-in receiver size: 2" x 2" Maximum drop: 7-1/2" Maximum rise: 2-1/2" 2" Ball capacity: Gross towing weight: 12,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 2,000 lbs Optimal ride tongue weight (when used with 2-5/16" ball): 1,200 lbs - 1,700 lbs Overall height: 13-1/4" Total from center of 5/8" pin hole with included ball mount installed: 16-1/2" Total length from center of 5/8" pin hole without ball mount installed: 13-1/2" Distance from adjustment pin hole to 2nd hitch receiver pin hole: 11-1/2" Hitch pin hole diameter: 5/8" Distance between pin holes on shank: 1" Accessory pin hole diameter: 5/8" 10-Year limited warranty This unique adjustable ball mount from Gen-Y Hitch has a vertical shank that is made up of 5 stacked 2" receivers that can accept almost any hitch-mounted accessory.
If your trailer's suspension is starting to sag or you've spotted rust on the old hangers, this plain steel kit makes replacing them easy. Includes all hardware to mount two leaf springs, so it's perfect for repairs or new builds.
This ball mount is designed in a unique X-shape so water can drain out of your receiver while it's installed, preventing seize up. Comes with a pin and clip.Features: Lockrail system on ball platform lets you torque the hitch ball down with a single wrench X-Shape shank drains moisture to avoid corrosion Built-in rise and drop Hitch pin and clip Specs: Fits: 1-1/4" hitch receivers (Class II only) Ball diameter: 2" Gross towing weight: 3,500 lbs Tongue weight: 350 lbs Rise: 2" Drop: 2-1/2" Overall length: 12-1/2" Center of pin hole to center of ball: 7-3/4" Limited 1-year limited warranty
Sturdy steel ball mount with solid shank measures 11-3/4" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitch receiver Ball platform provides mounting point for hitch ball (sold separately) Drawbar can be used in rise position only Sturdy steel construction with solid shank Black powder coat finish covers a-coat base for superior rust protection Hitch pin and clip included - hitch lock sold separately Specs: Application: 1-1/4" x 1-1/4" trailer hitch receivers Class II compatible only Gross towing weight: 3,500 lbs Tongue weight: 300 lbs Length: 11-3/4" from center of hitch pin hole to center of ball hole Rise: 3-1/8" from top of inside of hitch opening Ball hole diameter: 3/4" Pin hole diameter: 1/2" Limited lifetime warranty
Center hanger works with multi-axle trailer suspension systems that have 3" slipper springs.Features: Configured as center hanger Suspends equalizer on tandem- or triple-axle trailers Designed for trailers with 10,000-lb and 12,000-lb Dexter axles Fits 3" wide slipper springs Works with 1-1/8" diameter bolt (sold separately)
This steel, adjustable ball mount lets you tow up to 10,000 lbs with the 2" ball or 20,000 lbs with the 2-5/16" ball. Can be used in 5-1/2" drop or 4-1/2" rise positions. Fits 2-1/2" x 2-1/2" hitch receivers.Features: Ball mount with dual-ball platform lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Ball provides connection point for trailer coupler Adjustable height lets you tow trailers of different heights with the same vehicle Mount can be flipped to use in either a rise or drop position Slide ball mount up or down along shank and secure in place with included pins and vibration-resistant clip 2 Different-size hitch balls let you tow trailers with different coupler sizes To switch ball, simply remove pins, rotate balls, and reinsert pins Adjusts in 1-1/4" increments Ball mount doubles as a weight-distribution shank Anti-rattle design helps to reduce towing noise Heavy-duty steel construction Black powder coat on ball mount and yellow zinc trailer balls resist corrosion Hitch pin and clip or hitch lock sold separately Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Gross towing weight: When used with 2" ball: 10,000 lbs When used with 2-5/16" ball: 20,000 lbs Tongue weight: When used with 2" ball: 1,000 lbs When used with 2-5/16" ball: 2,000 lbs Maximum rise: 4-1/2" Maximum drop: 5-1/2" Distance between vertical adjustment holes: 1-1/4" Pin hole diameter: 5/8" Limited 1-year warranty
Filters
