Search: tk99fr   >  

For some reason Toyota isn't very forthcoming with how to figure out if you have the tow package or not. From my understanding all of the V6 models of the 2019 Toyota Highlander have the tow package but it isn't specified as to what else…

On a 7-Way connector the suggested minimum wire gauge for the White (ground) wire, the Red or Black (power) wire, and the Blue (brake power) wire is 12 gauge. The minimum wire gauge for the remaining Green (right turn/brake) wire, the Yellow (left…

The EcoHitch Hidden Trailer Hitch Receiver #EH35VR may interfere with the Hands-free Liftgate sensor like all of the other hitches. Typically this means you will need to place your foot on either side of the receiver tube in order to activate the…

The only hitch that is compatible with the full size 20" spare tire on a 2023 Toyota Highlander is the EcoHitch Hidden Trailer Hitch item #EH35VR. This hitch is custom fit and bolts to your Highlander with included hardware. This is a class III…

Yes, it does! The etrailer Hitch item #e75ZR has been confirmed to fit all models of the 2024 Toyota Highlander including the hybrid. This class III hitch with a 2" receiver is custom fit and bolts to your Highlander with included hardware. I…

Powered trailer wiring harnesses are not tested or rated for any alternate installation method. Installing it by attaching the power wire to a power outlet 12 volt wire will void the warranty. Also many times those outlets are not the only component…

The Draw-Tite Max-Frame Trailer Hitch Receiver part #DT84MR and etrailer Trailer Hitch Receiver part #e75ZR are both fits for a 2023 Toyota Highlander Platinum. There is trimming required of underbody panels for both models, but not really the actual…

There is fascia trimming required to install the EcoHitch part #EH35VR on your 2022 Toyota Highlander. You can see it in the attached install instructions.

The 2 easiest ways to tell if your 2020 Toyota Highlander XLE has the factory tow wiring is to either check behind the paneling next to the 3rd row seating on the driver's side to see if a connector is there that the Curt #C56RV module plugs…

The Traffic Cone Holder, #RA-26, that you mentioned is designed to store cones that are 12" - 36" tall, and the arm of the holder is 22-3/8" long. The arm does not fold down a full 90 degrees, so this would not be the best option for…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Due to where the Curt Trailer Hitch Receiver item #C99FR installs on the 2021 Toyota Highlander it does block the view of the lift gate sensor. It does still work but in a much limited capacity towards the outside of the bumper away from the hitch…