Search: e2 weight distribution   >  

No. If you're 2019 Ford F-150 has built in electronic sway control then it does the same thing that the Curt True Course Advanced Bluetooth Trailer Sway Control item #C94VV does. You would have to disable the built in sway control to use it.

I can see how this might be a confusing choice of words. I've seen instances where people have used both a weight distribution hitch with sway control AND the Curt True Course in order to create a "super" sway control system to keep…

The Jayco Jayflight 2005 28FKS has a dry tongue weight of 1135 lbs. That is a lot for a 3/4 ton truck and will have you close to the payload. With the air bags you will be able to get rid of the sag in the suspension but I would certainly want sway…

The Curt True Course Electronic Sway Control System #C94VV is compatible with your triple axle trailer. The system uses a solid-state gyroscope to sense sway and gps to monitor speed. It then will determine the brake force needed to correct the sway…

The Curt True Course Advanced Bluetooth Trailer Sway Control #C94VV wins for ease of install and it does a really good job but if you were wanting the best sway control that applies the left and right brake assemblies independently the Tuson…

I recommend the Fastway e2 Weight Distribution #FA92-00-0800 for your 2022/2023 Coleman 17B travel trailer. This hitch is rated for a tongue weight of 400-800lbs and a maximum trailer weight of 8,000lbs. With a dry tongue weight of 385lbs by the time…

I would be happy to help you find those parts and set your 2018 Lexus GX 460 up for towing your Winniebago Hike Trailer. There are a couple of class III hitches that are available for your Lexus but no class IV hitches available. This won't be a…

When using the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers #3035-P to install a Tekonsha brake controller in your 2021 Ford Explorer, the connector is located under the dash, above and to the right of where the driver's right…

I am not entirely sure what process you took so I'll give you some other things to try, or maybe a different way to test the Prodigy P3 #90195. First, sever the blue wire a couple inches from the back of your controller. Then use a circuit tester…

Yes, you can just swap out the bars you have currently with a higher rated 1,000 lb tongue weight set of spring bars to upgrade your system. For that all you need is the part #FA94-02-1099 that you referenced.

The Replacement Round Spring Bar for Fastway e2 Weight Distribution Systems - 1,000 lbs TW #FA94-02-1099 will be very similar in design to other manufacturers. The diameter of the bars is really consistent between brands at the head, but the size of…

For your Jayco Hummingbird 17FD with a 400 to 450 lb tongue weight, I highly recommend the Fastway e2 Weight Distribution Hitch #FA92-00-0600. The hitch is rated for tongue weights between 250 lbs - 600 lbs so it's rated perfectly for you, and…