Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Brandon, Yes, we do offer the 010-11088 under the Grease Seal Kit- Triple Lip #DX49CR. This comes in a quantity of two seals per kit.
view full answer...Hey Craig, It sounds like you are asking if you can use the Progressive Dynamics converter #PD69RR to charge a battery that has a 3 panel solar panel setup also charging it. The answer to that is yes you can.
view full answer...Hey Albert, the correct replacement lithium compatible converter for the part #PD9245C is the part #PD69RR which has same amperage output of 45 amps at the correct voltage for lithium batteries.
view full answer...Hey Jimmy, thanks for reaching out! The Progressive Dynamics 9200 Inteli-Power Converter #PD9245C is only able to charge standard batteries, so if you have Lithium batteries, you're going to need the 9300 Series #PD69RR instead. Are you upgrading…
view full answer...Each block of the Ultra-Fab Leveling Blocks #UF48-979050 is 1-3/8 inches thick.
view full answer...The Hellwig Contact Helper Spring #HE89SR sit on top of the overload springs on your 2024 GMC Sierra 3500 while the Hellwig Load Pro 35 Progressive Helper Springs #HE32XR basically reinvent the overload springs and do allow you to adjust how much…
view full answer...I reached out to my contact at Reese and confirmed that the Reese Revolution vhd-10K-22sw is a factory fit that is not offered in a replaceable option. Basically because of the smaller width and mounting style there is not a replacement with an…
view full answer...I reached out to my contact at Reese and confirmed that the Reese Revolution vhd-10K-22sw is a factory fit that is not offered in a replaceable option. Basically because of the smaller width and mounting style there is not a replacement with an…
view full answer...Typically it's the fifth wheel hitch that is responsible for chucking and bouncing. A looser fitting jaw to the king pin of the pin box is the number one reason for chucking. You didn't mention what hitch you have, but for a hitch with an…
view full answer...When the suspension hangers, equalizers, and shackles are installed from a kit like the part #APT3 the goal is to have the leaf spring as level as possible. The different height hangers is offset by the height of the equalizer and shackles so that…
view full answer...I recommend any trailer with a tandem axle setup use an equalizer regardless of the amount of leaves in the spring or if it is a double eye or slipper spring design. On a system like your trailer where each axle is mounted individually and not…
view full answer...Hey Roger, The oxidation of the plastic causes this and unfortunately isn't something that you can really get a rating on from the manufacturer. It's the same as the plastic seats at an outdoor stadium. Keeping the trailer clean and out of…
view full answer...