Don't Miss These Holiday Savings!
This clamp-type, red epoxy-coated battery terminal can be used to convert standard posts to marine or other special uses. Coating aids in polarity identification and corrosion resistance. Fits positive 3/8" stud terminals.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our trailer, we're going to be showing you how to install the Deka red epoxy-coated battery terminal. This offers a brass-plated wing nut and a 3/8" stud. The part number is DW05310. Now we're here in our battery box, and the problem we're running into is that our terminal just keeps loosening up and it's not holding a good connection. What we're going to do, go ahead and take that off. Let's remove our wire. This one we could also loosen both of our bolts up here, put a wire in there and clamp down on it.
If you do have those clamp style wires or if you've got one or two in there that are clamped on there, what we're going to do is just add a ring terminal here to the end. There we're just going to bring our terminal down, get it placed on there where we want it, and then we'll start to tighten down the nut. As you can see we've got a nice, solid connection there, and that ring terminal is going to go right down over and be underneath our wing nut there. Then we can, as you can see, there's plenty of room to get several connections made in there if you're operating more than one style of equipment. Let's get our wires back in place and all we'll have to do is pop our cover on and that's really all there is to it. That's going to complete today's look at the Deka red epoxy-coated battery terminal, part number DW05310. .
Average Customer Rating: 4.9 out of 5 stars (7 Customer Reviews)
This clamp-type, red epoxy-coated battery terminal can be used to convert standard posts to marine or other special uses. Coating aids in polarity identification and corrosion resistance. Fits positive 3/8" stud terminals.Great product. Just what I needed.
Easiest way to add any electrical system, to a vehicle that has today's standard side post battery connection to a battery that is compatible with both top and side post connections. Just simply attach to the top positive post and your good to go.
Great product. It is exactly as described and pictured. It has held up well under heavy usage in our tractor.
Works great! No issues.
works
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.