Result: Roadmaster slipper Spring

Hey Dale, you can install Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers #RM-2460 with a SumoSprings kit like the part #SS26MV. The SumoSpring would just engage a little earlier since it installs on top of the u-bolt plate which…

Hey Gary! The note you're referencing applies when the Correct Track system is installed, which your setup does not have. The MORryde X-Factor Crossmember #MR33WR does include longer wet bolts to account for the added bracket thickness at the…

Hey Jeffrey, the Dometic RV toilet part #DMC44JF is designed to fit toilet applications with a 7-5/8 inch rough in measurement which is the measurement you took. Since your current setup has 10-1/4 inches this would work with space to spare. What…

Hey Dale, both DeeMax and Hydrastar make really nice disc brake components. Either kit is going to work really well for your 2022 Grand Design Reflection 337RLS. If you want the best of the best and don't mind paying for the premium brand then go…

Hey Dale, Dexter bearings are rock solid and if I were you that would be what I go with. Timkens are awesome American made bearings but Dexter does not make low quality axle components so the part #DX26ER would be your best option. Did you have a…

Hey Dale, this is a great question but the Roadmaster Comfort Ride System part #RM49NQ that you referenced is the most current version of the system. It does come with the U-bolts and the new shocks. I sent an update to have all of that information…

Hey John, yes the flow through sensors like the part #TST-507-FT-S4 and the cap style like part #TST-507-RV-S2 both work with the 507 style monitor you have now. The flow through is generally the preferred style since it allows you to inflate through…

Hey Dale, I looked up your 2022 Grand Design Reflection 337RLS and since it has two 7k axles the correct Roadmaster Comfort Ride system would be the part #RM-2460-2570. This will a huge improvement in the suspension performance of your camper and…

Hey Nicholas! You're referring to the Roadmaster 2630 for 3" axles from the installation instructions. Although we don't have the Roadmaster part, you can use the Dexter 3" Round Trailer U-Bolts (Qty 2) #SP01-060. We have confirmed…

Hey Richard, thanks for reaching out! In order to remove the old bearing so you can install the 50MM Nev-R-Lube Bearing #31-71-3 you'll need to use a press or bearing removal tool kit. Dexter Axle actually recommends using "an arbor press…

Hello Robert, thanks for reaching out. The Roadmaster Comfort Ride is a great choice for a suspension upgrade. This system is compatible with the MORryde X-Factor Crossmembers, so you can add those to all 3 hangers if you wish. One thing I would do…

It's a good question, but your Grand Design's double-eye springs aren't compatible with the bracket for the slipper springs (which have a different style) of the Roadmaster Comfort Ride Leaf Spring Suspension Kit #RM-2460-2560. You're…