Hey Robert! If your trailer has 10" brake drums with a 5 on 4-1/2 bolt pattern, there's a good chance you have 3,500 lb axles. I can't say for sure based on the trailer year and model alone, so you will need to confirm this. If they are…
Hello John, thanks for reaching out. Yes, the mounting holes on the TecNiq Contoured Seven Function Box Style Tail Light #TN42XR (driver side) and #TN62XR (passenger side) are exactly the same as the Wesbar 271595 tail light. They are 2" apart…
Hey Steve, yes we do have backing plates for the e-track wheel chocks part #EM09160 like the part #e66RR for a set of 4. The holes will definitely line up.
Hey Tim, From the center of the pin hole back to the mounting plate on the etrailer Bolt-On Swivel Mounting Plate #e52JR is approximately 1-3/4". The plate is 1/4" thick and portion that would sit under the frame extends out 1-3/4". If…
Hello Don, Great question, and thank you for the picture. I would cut the trim. Adding a plate or shim can introduce a weak spot and may also lead to increased vibration while traveling. Plus, you want the etrailer Bolt-On Swivel Mounting Plate for…
The correct way to wire your breakaway battery, like the Hopkins Engager #20400, is to have the black wire from the battery connected to the 12V power on your trailer, and then the blue wire to your breakaway switch which, in turn, connects to the…
I pulled up the owners manual of your 2014 Ford F-150 and it looks like fuse number 67 is the trailer running light circuit so that would be the one you would need to check. It takes a 20 amp fuse.
Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you can…
etrailer is from the US. We are right in the middle near St Louis MO in a town called Wentzville. But we sell products that are made all over. Some from US and some from other countries as well.
The Bulldog Replacement Sidewind Gear Kit #BD500212 that you referenced is the correct repair kit for your Bulldog square tube jack according to my contact at Bulldog. The top cap you can use is part #BD017802. After you repair the jack you will want…
We do have the replacement screw and gear kit for your 12K Bulldog 180 Series Jack. You will need Gear Kit #BD500212 and Screw and Nut Kit #BD500217. You will also need grease for the new gears, so if you don't have any use #L11316. I included a…
Filters
