Recommended Tire Chains for a 2023 Rivian RS1 275/50 R22
Hello, I’m looking for low profile 16mm or smaller snow chains/cables for my 2023 Rivian RS1 275/50 R22. Would these work? Thanks! | Hey Julie, thanks for the information and the picture! I checked with Rivian and we've only got one set of tire...
Recommended Hitch and Wiring Harness for a 2002 Mitsubishi Montero
Hello, I am looking for a bolt on tow hitch for my 2002 Mitsubishi Montero with VIN JA4MW51R32J071808. Likewise tow hitch adaptor with ball, T connector wiring and L bracket. | Hey Rene, thanks for the information. To add a hitch to your 2002...
Would Thule Hullavator Work With Rivian R1S OEM Roof Rack?
Im trying to install the Thule Hullavator on a Rivian R1S. I already have the Rivian Cargo Crossbars so Id prefer to use these if possible. The Hullavator requires the crossbars to overhang and the Rivian Crossbars dont. Is there a way to stackinch...
Where Do You Measure From On The Trailers Coupler to Install The Pole-Tongue Adapter # EQ95-01-5950?
For the tongue pole adaptor, you mention in the video that it need to be install between 27 to 32 inches from the reveiver in the tongue. Do we mesure from the tip of the receiver or the middle, because if I mesure from the tip of the receiver...
Do You Have a Baseplate for a 1992 Mitsubishi Delica L300?
I have a 1992 Mitsubishi Delica L300 imported from Japan that I want to flat tow behind a truck camper. I need to see if there is a mount that will fit. The closest thing I can see on your vehicle ion is a Mitsubishi Montero/Pajero, they are...
Will etrailer Spare Carrier # e98ZR Work with Rivian R1S 20
Does this fit a rivian r1s 20 inch all terrain tire? 275 / 65 / R20 | Hey John, yes the etrailer spare tire mount part # e98ZR that you referenced will work with the wheel and tire Rivian R1S 20 inch all terrain tire that you referenced. |
Is Brophy Aluminum Ball Mount Compatible with the Curt RockerBall Shock Absorbing 2" Hitch Ball
Hello, Does the Brophey 14 5/8 aluminum ball mount accept a Curt rockerball 1 shank hitch? Thanks | Thanks for reaching out again, Jason! Yes, the Brophy Ball Mount # EA40 is compatible with the Curt RockerBall Shock Absorbing 2" Hitch Ball...
How to Tell if Power Mountain Tallboy Off-Road Bottle Jack Will Work with a 2023 Rivian R1S
what jack can you recommend for changing tires on my Rivian R1S 2023 and Intech Sol Dusk Rover off road package travel trailer? Will the Tallboy pm34fr work with a Rivian puck? | Hey Darin, thanks for reaching out! The Power Mountain Tallboy...
Will the Curt Class III Trailer Hitch # 13091 fit My 1990 Mitsubishi Montero
Class 3 Trailer Hitch 13091 for 1992-2000 Mitsubishi Montero In some sites the Class 3 Trailer Hitch 13091 is listed for the Montero 90 LS but not on the curt site, I cannot find any info on the distance between the bolt holes, I believe this...
Trailer Hitch for 2001 Mitsubishi Montero Limited
Is the tow hitch receiver for a 2001 Mitsubishi Montero Limited no longer available? Thank you. | We do indeed offer Class III receiver hitches for the 2001 Mitsubishi Montero and Montero Sport (two distinctly different vehicles). For the...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
Rhino-Rack Roof Rack Recommendation for a 1989 Mitsubishi Montero with a Naked Roof
I need a roof rack system for my 1989 Mitsubishi /montero I have the tall roof I believe the legs I need are RL280S4 and the bars RB1375S the legs are 11inch the gutter on the Montero is 6inch below roof thanks | You are correct, the...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
Is The Curt C13800 Hitch For A 2001 Mitsubishi Montero A No-Drill Install?
I have a Mitsubishi Montero 2001 that your website said will no drilling needed. According to my unit I need Part number 13800, but when I check my unit just found 2 holes in each side with only 1 nut in es side. How can I install the part without...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
Bow Stop with 7 Inch Long Span and 4 Inch Wide Base
I have a Y-bow stop on boat trailer that is 4inch x 4inch at the base that I would like to replace The Y portion is probably 6 to 7inch wide guessing. Most of the ones I noticed on your website are smaller. Do you have one that is 4inch wide...
Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load
What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...
Recommended Trailer Hitch for a 2003 Mitsubishi Montero
Hello, I have a truck equivalent to the 2003 Mitsubishi Montero, just made for another market, I was going to get a hitch from Uhaul but they are out of stock. To make sure that I am ordering the right item: do you ship to Canada? do you have...
How Do I Install The C13800 Coupler If The Tongue Only Has One Hole
How do I install a 13800 on my Montero 2001 if I see only one hole with nut at both sides? Please advise | Hello Anibal. The Trailer Coupler # C13800 does require 2 bolts for mounting to the tongue. If your trailer only has 1 bolt hole, a second...
Availability Of 2" Hitch Receiver For A 1991 Mitsubishi Montero
Do you have a 2” receiver hitch for a 91 montero? I see you have the 1 1/4. I need a 2” | Hello Rickey. The Curt Class 2 Hitch # C12181 is currently the only custom fit aftermarket hitch available for the 1991 Mitsubishi Montero and it uses...
Hello, Wondering about a trailer light harness for a 2003 Montero Limited. See 2 options 1. the Hopkins Part HM11142365 2. Curtis C55380. The Hopkins is almost 3 times as much. is it really that much better? Live in Vermont lots of road salt...
Will Surco Safari 5.0 Roof Basket Fit Raised Side Rails of 1994 Mitsubishi Montero
Hi, I have a 1994 Mitsubishi Montero Sr with factory roof rails. Im interested in this roof basket but Im not sure if it will be able to get installed with the the factory rails. Because I want the basket to cover my whole roof. Any help? Im...
Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible
have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...
Filter Your Search
Contact and Help