Will The Curt Trailer Hitch Receiver Prevent Use of the Hands Free Lift Gate on 2024 Lexus RX 500h?
Follow up question on the C29VV. I would think the position of the hitch support bar and the hitch receptacle itself would trigger the kick sensors to open the tailgate. Please confirm that installation of the C29VV would NOT interfere with...
Will Curt Trailer Hitch Receiver C29VV Fit a 2024 Lexus RX 500h with Kick Sensors
Does the Curt C29VV fit a 2024 Lexus RX500h and will the kick sensors still work? | The Curt Trailer Hitch Receiver # C29VV will definitely fit your 2024 Lexus RX 500h and you'll still have the kick sensor functionality. Just know that you'll...
Hitch Pin Hole Location for 2024 Lexus RX 500h Curt Hitch Receiver
a Does the end of the receiver hitch align flush with the rearmost part of the bumper assembly? b What is the dimension from the end of the receiver hitch to the center of the hole where the hitch pin inserts? | Hey Pep! According to the photos...
Availability Of Wireless Trailer Lights That Use OBD Connection
Hello, Are there wireless Trailer lights that use the OBD connection? I found Sail Timers Speedy Trailer Lights, but I have never heard of them. Google AI says they exist but I cant find them. AI not always right? Thanks for your help. Adam...
Roof Rack to Fit 2024 Lexus RX 500h with Flush Rails and Panoramic Roof
Hi, I am looking for a roof rack for my 2024 Lexus RX500h with panoramic roof. Thank you. | Hey Mark, thanks for reaching out! I recommend picking up the Thule WingBar Evo Roof Rack for Fixed Mounting Points # TH28PG for your 2024 Lexus RX...
What Hitch Ball Size Do They Use in Europe
is hich ball the same size as europe | We currently carry four different size hitch balls which are 1-7/8", 50mm, 2", and 2-5/16". The most common hitch ball size in Europe is 50mm for which you can use part # 63912 if you need a 3/4" diameter...
Replacement Side Marker Lights For A 2015 OEM Can AM RT622 Motorcycle Trailer
I have a 2015 OEM Can Am RT622 motorcycle trailer and need Replacement LED Side Marker lights YELLOW in the front RED in the back they are obsolete and I can not get them anymore and was wondering if you would be able to help find a replacement...
Trailer Turn Signals Not Working with # C55050 Wiring Harness Installed on a 2008 Jeep Commander
I have the 118408 converter connected to my 2008 jeep commander i everything works fine at the plug, when I plug in the only lights that work are the running lights, with running lights off, if I turn on a blinker and step on the brake the brake...
Recommended Wiring Harness For 2010 Jeep Commander Without Factory Tow Package
we purchase hitch and wiring harness for our 2010 jeep commander. everything went perfect with install but the lights wont work. The vehicle was not equiped with a factory tow package. Does the computer need to be activated. Any ideas on...
Trailer Hitch that Fits 2026 Lexus RZ350e Electric
I’m looking for a 2 inch receiver that will fit my Lexus RZ350e 2026. I will be using it for a bike rack not for towing. I found the one that fits the 2026 Lexus RZ350 but it does not specify if it also works with the electric model. Can you...
Does Centering Keel Roller # CE29505 Come with Install Brackets
Mine has 8” bracket does the new one come with replacement bracket? | The self centering roller part # CE29505 does not come with a mounting bracket but for that we have the # CE10305G for a bracket and for a roller # CE10727A which includes...
Does Inno Roof Deck Platform rack part # INA510 Fit 2008 Jeep Commander OEM Crossbars
I have an 08 Jeep Commander with OEM roof bars. The bars are flat aero type bars that are curved…meaning taller in the middle than on the sides. I’m interested in the Inno INA510. Will this mount to my curved bars? Thank you. | Hey Allen, yes...
Front Hitch for 2006 Jeep Commander to Mount SnowBear Personal Snowplow
Mounting bracket for snow bear personal plow to fit 2006 Jeep commander | Since the SnowBear Personal Snowplow part # SB324-081 is designed to attach to a front hitch what you'll need is a front hitch designed to fit your 2006 Jeep Commander...
Replacement 4-Way and 7-Way Connector for a 2007 Jeep Commander w/ a Factory 7-Way
I would like to remove factory 7 pin harness and install A new 4 pin harness 2007 Jeep Commander Trailor brakes not needed old harness has been butchered | Hey Anthony since you had the factory 7-way you'll need the Curt T-Connector Vehicle...
Will Redarc Tow Pro Brake Controller Fit 2010 Jeep Commander with 7-Way
I have a 2010 Jeep Commander 5.7L and a 21foot expandable trailer. Will the Redarc Tow Pro elite work and if so, what additional pieces are needed for the install? I already have a Mopar Electric Trailer Brake Controller Harness 82210512ACinch...
Where Is The Factory Wiring Harness Plug On A 2008 Jeep Commander?
I have a 2008 jeep commander and can not find the factory plug to fit the 20135 combo adapter to, any ideas wear to look? | Hello Mitch, thanks for reaching out. The # 20135 Multi-Plug T-One Connector Assembly you mentioned is made for a 2008...
Can the Curt Echo Brake Controller Be Used W/ Air Brakes
I have a 2006 Newmar Dutch star with air brakes .I want to pull a enclosed trailer will Part C51180 work the Brakes ? | Donald, the Curt Echo Trailer Brake Controller # C51180 is not going to work with air brakes. This brake controller works...
Parts Needed To Add 4-Flat And 7-Way To 2008 Jeep Commander
Tim Anderson 320-226-5570 Looking to add wiring harness for a 2008 jeep commander without factory tow package I know I need 118408 but would also like to add 7 way round plug-in and mount but I don’t need the trailer brake option | Hey Tim,...
What is the Best Hitch for a 2006 Jeep Commander
I need a hitch for a 2006 Jeep Commander SUV. Which is the best product? | Hey Bruce, welcome back! The best hitch for your 2006 Jeep Commander, is the Curt item # 13414. This custom fit class III hitch has a 2" receiver and includes all hardware...
Recommended Axle-Less Suspension System for M1101 Military Trailer
Do you carry Curt trailing arm suspension components/kits? Im contemplating converting a M1101 trailer into an off road camping trailer and want to utilize axleless trailing arm suspension. Thank you. | The only axle-less suspension solutions...
Brakes Jerk and Grab when Braking Using Curt Echo Brake Controller # C51180
I have a 2007 Jeep Commander. I pull a Sunlite 16bh trailer. Less than 3000 lbs. The controller worked smoothly the first few times I took it out, but now the brakes jerk and grab when applied. The response it set at 10, and the sensitivity...
Which Breaker from the Wiring Kit # 5506 is Needed to Install the Tekonsha Prodigy P2 # 90885
which relay too use from 5506 on tekonsha p2 | If you are using the Wiring Kit # 5506 to install the Tekonsha Prodigy P2 # 90885 then you will want to use the 30A breaker on the power wire for the brake controller. I have attached a helpful...
Availability of CAD Diagram for Timbren Axle-Less Trailer Suspension System # A35RD545E
Can I get a CAD model of part # A35RD545E to help in the design of my trailer? | We do have engineering diagrams for the Timbren Axle-Less Trailer Suspension System # A35RD545E that you referenced, and we do show these on our product page. If...
Is the Curt or Draw-Tite Hitch Better for a 2025 Lexus RX 500h
Do you recommend the Curt or Draw-Tite for my 2025 Lexus RX 500h? The Draw-Tite has a higher tongue weight capacity but I wanted to check and see if that matters or not? | Hey Dave, thanks for reaching out! I actually recommend picking up the...
Filter Your Search
Contact and Help