Can I Bolt the Curt Gooseneck Flat Plate Directly to the Frame on a 2006 GMC Topkick 4500 Chassis?
Looking to install this on a 2006 GMC Topkick 4500 chassis truck. Would I need to install an installation kit with this plate C65500 or bolt it directly to the frame? | Hey Jon. The Curt Gooseneck Flat Plate item # C65500 can be bolted directly...
Why Choose a Powered Taillight Converter Over a Non-Powered Model
What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...
Which Kat's Block Heater Fits 2025 Mitsubishi Outlander SE 2.5 Liter
Will this heater work, without modification, on my 2025 Mitsubishi Outlander SE? Please confirm the location for this vehicle as well. | Hey James, yes the Kat's Heater part # KH11812 that you referenced is a confirmed fit for your 2025 Mitsubishi...
Measurements On Draw-Tite Trailer Hitch # 41952
I see the center to center of the holes measure 31 and 1/8. Can I get the measurement from the outside bracket flange to the outside of the other bracket flange? My hope is their gonna measure at 32.5, . | The Draw-Tite Ultra Frame Trailer Hitch...
Recommended Tankless Water Heater Replacement For A Suburban 12 Gallon RV Water Heater
Ok I have a Suburban 12 Gallon Water Heater DSI and 110V, model SW12DEL. Want to pull it ans put a tankless heater in. Question is quick brand? Furrio or Fogatti. And which particular model? | The best tankless replacement for your Suburban...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
Does Demco 50-Degree A-Frame Trailer Coupler Bolt On
what size bolts are used with the weld nuts for this coupler. The bolt diameter | The Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Primed - 2-5/16" Ball - 21K # 12660-97SP does not have any bolt information, with the reason...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load
What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...
Torque For Installation of Dexter Electric Trailer Brake Kit 23-180-181
What are the torque specs for the brake backing plate? | According to Dexter, the torque should be between 25-50 ft. lbs. when installing the # 23-180-181. If you don't already have mounting hardware you'll need the Mounting Bolts and Hardware...
What Ramps Are Good For Loading A Car Onto A Flat Bed Truck
Will need these ramps to load small car on the back of the flatbed truck. It seems like they will be the option for the truck, but you all are the experts. Not sure if it will but it is by far the first one we have seen that has capture our...
Parts Needed to Wire in Brake Controller and 7-Way to 2000 C6500
I recently purchased a 2000 C 6500 from U Haul. I used one of their car hauler trailers for my move, the trailer is a electric over hydraulic system. What do You recommend to so I can tow a car hauler trailer with just one brake axle and a 7...
How to Connect a Tekonsha Prodigy P3 Brake Controller to a 2005 GMC C4500 Topkick
I have a Tekonsha P3 brake controller I removed from my other truck. I now have a 2005 GMC C4500 Topkick I would like to install it in. Do they make a wiring harness for this truck? | You can install your Tekonsha Prodigy P3 # 90195 in your...
Dimensions of the SumoSpring Helper Spring for a 2009 GMC Topkick
the summo spring for a 2009 topkick, 2 wheel drive front axle. what is the length of this bump stop. | The bump stop is 5" long on the SumoSprings Solo Custom Helper Springs - Front Axle item # SSF-281-47. The bracket is 7/8". This is a confirmed...
Trailer Hitch and 4-Way Wiring Recommendation for 2018 Mitsubishi Eclipse Cross
I need a hitch and 4 wire harness for a 2018 mitsubishi eclipse cross | For your 2018 Mitsubishi Eclipse Cross we have the Curt hitch # C13273 which is a confirmed fit and then for 4-way wiring you'd want the part # C56296 and you'd be set. |
Hitch for 2005 GMC C5500 Topkick with Tommy Lift
I have a 05 GMC C5500 Topkick snap on truck Would this hitch work on here with a Tommy lift Thank you | The # TLF1003-30 hitch you're asking about is designed for a 1999-2016 Ford F350, F450 or F550 chassis/cab and wouldn't fit your Topkick. For...
What Brake Controller and Module for 1997 GMC Topkick 6500 Towing 10 Ton Trailer
I have a 97 gmc 6500 and I need to know what you recommend to install brake controls for a dual wheel tandem trailer with a 6 pin factory plug.what controller,cable,circuit breakers, wiring info the trailer is rated for 10 tons. | Depending...
Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible
have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...
Troubleshooting Rhino-Rack Roof Rack Installation on 2018 Mitsubishi RVR Flush Rails
Ive tried to install the kit of the SX031 legs on my 2018 RVR, but if you look at the pics those legs are not straight on the flush rails so when I have the bars on them then they dont fit anymore... Am I doing something wrong or I got the wrong...
Hard Wire Brake Controller Installation in 2002 GMC Topkick
Need to hard wire a controller in a Topkick with Hydraulic brakes any insight would be help full? Most of Power ,ground and feed to the trailer is not that big of a deal the control wire from the brake controller to the brake switch is where...
Gooseneck Hitch Recommendation for 1996 GMC Topkick Lo-Pro with 12Ft Bed
I have a 1996 GMC topkick lo-pro with a 12foot bed and would like to set it up to tow a goose neck trailer, thank you for any and all assistance | According to my contact at Curt, you could use the Gooseneck Flat Plate, # C65500, and mount it...
Troubleshooting Turn and Brake Lights not Working with Running Lights on, 2009 Volkswagen Rabbit
I have the same problem than the VW GTI guy. After I have wired the kit according to the 2-wire method into my 2009 Rabbit, turn and stop light are working as long as the running light is not on. I have tried also the different 3-wire methods...
Filter Your Search
Contact and Help