3-15/16" x 1-1/4". Waterproof LED markerlight can be installed on your trailer fender. Amber light faces front, and red light faces rear. Surface mount with bracket (not included). Accepts ... can be used as either a side markerlight or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front
3-15/16" x 1-1/4" Rectangle. Waterproof LED trailer light functions as a clearance light or side markerlight when properly mounted. Surface mount - hardware not included. Accepts standard ... . If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side markerlight.
3-7/8" x 1-1/4" Rectangle. Waterproof, 2-LED trailer markerlight mounts on your trailer fender. Amber light faces front, and red light faces rear. Surface mount with bracket (sold ... from the side. So this type of light can be used as either a side markerlight or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights
3-15/16" x 1-1/4". Waterproof LED markerlight can be installed on your trailer fender. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket (not ... light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side markerlight.
4-1/16" x 1-1/4". Waterproof, LED trailer light serves as either a side markerlight or clearance light. Miro-flex reflector increases light output. Surface mount with bracket - hardware ... . If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side markerlight.
3-15/16" x 1-1/4". Waterproof LED markerlight can be installed on your trailer fender. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. Hardwired ... , then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side markerlight.
The part number 072-097-00 is for a Dexter leaf spring. Our closest equivalent would be the 5-Leaf Double-Eye Spring item #e34SR. This is a 3,000 lbs spring that works with 6,000 lbs axles. It measures 25-1/4" long from eye hole to eye…
I checked with Dexter and they indicate that for hub 008-386-80: "Available for service parts only." Meaning the actual hub assembly is not available but parts for it are such as the 35mm cartridge bearing #31-72-3. There…
We only carry the springs for those heavy duty style ramps. For the springs we have the Ramp Spring - 2K Torque for 1-1/2" Shaft - left hand #RS16933LH and corresponding right hand #RS16933RH. The other parts will need to be either…
Based on my research the Shelby 5107 coupler looks to be an A-frame coupler that accepts a 2" ball, though I was unable to find the weight capacity as this seems to be an older coupler. For a replacement coupler there are a couple…
I'm not sure why they said those were your only options, but we do have the correct replacement oil seal for your Dexter 10k hub from 2006, and is the exact replacement for a National 370150BG: - Unitized Oil Seal #10-51 The #10-51 has an inner…
The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…
I understand how it would be unclear which measurement to use since the center of the axle is not the same as the center of the wheel on a torsion axle. For a single axle trailer, measure from the center of the spindle (center of wheel) to the…
I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…
The closest Jeep style fender we are going to have is trailer fender part #HP76VR. This fender is for single-axle trailers with 13" - 15" diameter wheels and measures 10" wide x 36" long x 19-1/4" tall. For an aluminum tread…
Yes, the DeeMaxx Disc Brake Assembly #DE89YR will fit on a 3,500lb UFP axle. You may need a different Grease Seal #168255TB depending on the age of your axle. If you have a grease seal with a 1.68" inner diameter this is the seal you will need.
Filter Results
