Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The PD9140A is a converter that has the smart charger setup built into it so the correct pendent would be the part #PD92201.
view full answer...Yes, for a white base version of the #RVPL7CB you'd want the part #RVPL7C.
view full answer...We do carry the lens for the Gustafson 12V RV Porch Light #277-000485 you were looking at with part #291-000002. I was able to find a dimensional drawing of the lens for your current light but I do have the measurements for the lens (pictured…
view full answer...The 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 27" Long #SP-210275 will work with your vintage trailer. It looks from the photo like you would also need the Replacement U-Bolt with Nuts for 2"…
view full answer...With how long your current springs are, you will have replace the hangers for the springs to attach to. That being said, this does happen sometimes and it is not the end of the world. The 6-Leaf Double Eye Spring #e27SR will have a length of 26…
view full answer...The controller would need to be hardwired to your C5500 motorhome as it would not have a harness under the dash using our Brake Controller Installation Kit, part #ETBC7. Due to the fact that your motorhome is longer than the usual passenger…
view full answer...Blue Ox has an easy system for determining the weight capacity of your spring bars, whereas other companies may use measurements or printed capacity to assist. With Blue Ox, there is a 5 dimple system: No dimples means it is rated for up to 350 lbs…
view full answer...If you have a Coleman Mach 1, Mach 3 or Mach 15 air conditioning unit then you can use the MaxxAir TuffMaxx Replacement Shroud part #MA00-325001. This is currently the only replacement shroud we offer for Coleman air conditioning units. Since the…
view full answer...The #HSE7K-T1 brake kit you referenced is designed to work with 7K axles, regardless of the suspension used. It'll work perfectly with your axles/suspension. The rotors included are compatible with a 25580 inner/14125A outer wheel…
view full answer...Though it would be impossible to tell you what model of Coleman AC you have based on measurements it is possible that the MaxxAir TuffMaxx Replacement Shroud #MA00-325001 will work for you as this is a replacement for Coleman-Mach Mach 1, Mach 3…
view full answer...I have a similar solution that you can use with your Dometic AC unit but the kit you mentioned will only work on the Advent Air AC units. Instead you'd want the SoftStartRV part #SSR54FR which will work great on a Dometic unit and…
view full answer...We do have the correct mounting brackets for the Westin HDX Grille Guard #57-3900 or #57-3905 that fit your 2021 Ford F-250. The correct mounting hardware is the following: - Replacement Hardware Kit for Westin HDX Grille Guard #57-3900PK
view full answer...Filter Your Search
Contact and Help