... are removed. Includes 4 pads, covers, and mounting hardware. inserts cover bases when the legs are removed Specs: Application: Rhino-Rack RCH, RCL, RVH, and RVL roof rack legs Quantity: 4 pads, 4 covers, and mounting hardware 5-Year limited warranty
Built for off-road use, this platform rack's large, flat surface accommodates loads of all shapes and sizes. Roof rack legs install to the flush factory side rails on your vehicle's roof. Compatible with many Rhino-Rack accessories. includes 1 platform and 4 legs Specs: Dimensions: 59" long x 54" wide x 1-3/4" tall 5-Year limited warranty
Built for off-road use, this aerodynamic platform's large, flat surface accommodates loads of all shapes and sizes. Compatible with many Rhino-Rack accessories, including light brackets, holders, and awnings. Requires fit kit (sold separately). 1-3/4" tall Weight: 104 lbs 5-Year limited warranty
Replace a damaged crossbar or add another bar to your TimberLine FX roof rack with this half kit. Durable, aluminum crossbar has a built-in top channel. Installs directly on your vehicle's raised side rails. cores (sold separately) deter theft Specs: Quantity: 1 crossbar Crossbar dimensions: 53-1/2" long x 5-1/4" wide x 4" tall Weight capacity: 165 lbs Always observe your vehicle's maximum
These custom-fit clamps and pads let you mount 4 Inno XS200, XS250, or INSU-K5 feet to your vehicle's naked roof to help create an aftermarket roof rack system. Clamps mount to feet with bolts ... Features: Custom-fit clamps and pads let you install Inno roof rack feet on your vehicle with a naked roof Works with XS200, XS250, or INSU-K5 feet Pairs with 4 feet and 2 crossbars (sold separately
Replace a damaged crossbar or add another bar to your TimberLine FX roof rack with this half kit. Durable, aluminum crossbar has a built-in top channel. Installs directly on your vehicle's raised side rails. cores (sold separately) deter theft Specs: Quantity: 1 crossbar Crossbar dimensions: 41-1/2" long x 5-1/4" wide x 4" tall Weight capacity: 165 lbs Always observe your vehicle's maximum
The only option we have for your cab/chassis is the Reese Low Profile 5th Wheel Trailer Hitch, part #RP30054. This hitch has a 30,000-lb gross towing capacity. Installation of this hitch requires it to be installed directly through a 1/2 inch steel…
The LM67000LA is a Timken part number for a bearing cone with a 1.250" I.D. and a 2.328" O.D. This is the same as our bearing part #LM67048. The LM67010 is a Timken part number for a race with a…
The spring with the black cable drum should always be mounted to your LEFT, standing on the inside of the trailer looking out. This is very important for proper operation. Dual spring systems, like #ERS160D96, have a red-coned and a black-coned…
The #42 E-Z Lube Spindle part #TRU37FR has a brake mounting flange which matches the industry standard of 5 on 3-7/8". I have attached a photo below.
Yes, based on the measurements you took of your hub bore diameter the correct Bearing Buddy Bearing Protectors is the part #BB2441 or #BB2441T-SS for the stainless steel model that will resist any corrosion. These are designed to fit hub bore…
The Dexter 8-201 hub and drums use 12 x 2 inch brake assemblies. You can verify this by measuring your drums as shown in the attached picture. I recommend #AKEBRK-7-SA electric brake assemblies. Both the left and right hand brakes are included and…
The Tandem Axle Trailer Fenders - Double Radius - Steel - 14" to 15" Wheels - Qty 2 #HP94VR are 65" long x 9" wide x 15" tall and they are designed to work with 33…
In the USA a tandem axle utility trailer with a gross vehicle weight rating (GVWR) of 7500-lbs should have brakes installed. Any trailer over 3000-lbs must have brakes on all wheels in most states, but laws do vary. Some states require braked axles…
I do have an option for you but all of our trailer wheels with a 5 on 4-3/4" bolt pattern are 15" diameter like the Provider ST205/75R15 Radial Trailer Tire w/ 15" White Spoke Wheel part #A15R475WS.…
If you are referring to two white wires from the brake magnet that are coming from the rear of each electric brake assembly, then it would not matter which wire is connected to ground and which wire is used for the brake feed. The magnet that…
If your HydraStar Electric Over Hydraulic Actuator #HBA16 isn't pressurizing then I recommend running these 2 tests: 1. Run direct power to the HydraStar by connecting the white wire directly to the negative terminal on a 12V battery…
Built for off-road use, this platform rack's large, flat surface accommodates loads of all shapes and sizes. 4 Roof rack legs install to the fixed mounting points on your vehicle's roof ... installation using the fixed mounting points on your vehicle's roof RCL legs bolt to factory mounting points Complete system includes 1 platform, 4 legs, and fit kit Assembly required Specs: Dimensions
Replace a damaged crossbar or add another bar to your BaseLine FX roof rack with this half kit. Durable, aluminum crossbar has a built-in top channel. Installs on your vehicle's naked roof. 4-3/4" tall Weight capacity: 165 lbs Always observe your vehicle's maximum roof load capacity Weight: 7.5 lbs Top channel dimensions: Overall: 7/8" wide x 7/16" deep Channel opening
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars. vehicle with a naked roof Works with XS200, XS250, or INSU-K5 feet Pairs with 4 feet and 2 crossbars (sold separately) to create a complete roof rack Clamps are designed specifically to fit the curves
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars. vehicle with a naked roof Works with XS200, XS250, or INSU-K5 feet Pairs with 4 feet and 2 crossbars (sold separately) to create a complete roof rack Clamps are designed specifically to fit the curves
Low-profile, aerodynamic crossbar lets you build an aftermarket roof rack for your vehicle. Aluminum bar has a T-slot that lets you mount channel-mounted carriers and accessories. Rubber strip in T-slot keeps out dirt and won't need trimming., or INSU-K5 feet Pairs with 4 feet and 2 crossbars (sold separately) to create a complete roof rack Clamps are designed specifically to fit the curves of your doorjambs Mount to roof rack feet with bolts Molded
Low-profile, aerodynamic crossbar lets you build an aftermarket roof rack for your vehicle. Aluminum bar has a T-slot that lets you mount channel-mounted carriers and accessories. Rubber strip in T-slot keeps out dirt and won't need trimming., or INSU-K5 feet Pairs with 4 feet and 2 crossbars (sold separately) to create a complete roof rack Clamps are designed specifically to fit the curves of your doorjambs Mount to roof rack feet with bolts Molded
Low-profile, aerodynamic crossbar lets you build an aftermarket roof rack for your vehicle. Aluminum bar has a T-slot that lets you mount channel-mounted carriers and accessories. Rubber strip in T-slot keeps out dirt and won't need trimming., or INSU-K5 feet Pairs with 4 feet and 2 crossbars (sold separately) to create a complete roof rack Clamps are designed specifically to fit the curves of your doorjambs Mount to roof rack feet with bolts Molded
Low-profile, aerodynamic crossbar lets you build an aftermarket roof rack for your vehicle. Aluminum bar has a T-slot that lets you mount channel-mounted carriers and accessories. Rubber strip in T-slot keeps out dirt and won't need trimming., or INSU-K5 feet Pairs with 4 feet and 2 crossbars (sold separately) to create a complete roof rack Clamps are designed specifically to fit the curves of your doorjambs Mount to roof rack feet with bolts Molded
Low-profile, aerodynamic crossbar lets you build an aftermarket roof rack for your vehicle. Aluminum bar has a T-slot that lets you mount channel-mounted carriers and accessories. Rubber strip in T-slot keeps out dirt and won't need trimming. your vehicle's maximum roof load capacity Limited lifetime warranty Inno Custom Fit for XS200, XS250, and INSU-K5 Roof Rack Feet: Quantity: 4 clamps and pads Limited lifetime warranty
Built for off-road use, this platform rack's large, flat surface accommodates loads of all shapes and sizes. Roof rack legs install to the fixed mounting points on your vehicle's roof. Compatible with many Rhino-Rack accessories. to level the platform Complete system includes 1 platform, 6 legs, 6 spacer blocks, and fit kit Specs: Dimensions: 75" long x 49" wide x 1-3/4" tall 5-Year limited warranty
Built for off-road use, this platform rack's large, flat surface accommodates loads of all shapes and sizes. Roof rack legs install to the raised factory side rails on your vehicle's roof. Compatible with many Rhino-Rack accessories. includes 1 platform and 4 legs Specs: Dimensions: 75" long x 49" wide x 1-3/4" tall 5-Year limited warranty
Built for off-road use, this aerodynamic platform rack's large, flat surface accommodates loads of all shapes and sizes. Backbone mounting system provides a stable mounting surface for the platform. Compatible with many Rhino-Rack accessories. system includes 1 platform and 1 Backbone mounting system Specs: Dimensions: 75" long x 49" wide x 1-3/4" tall 5-Year limited warranty
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars include built-in C-channels for mounting Rhino-Rack heavy-duty, contractor-grade accessories. Lightweight, extruded, structural-grade aluminum construction for strength and durability Silver color Rhino-Rack Quick Mount Spacers - Heavy Duty - 5 mm - Qty 4: Quick Mount spacers allow you to fit Rhino-Rack
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included. on the roof of your vehicle Rhino-Rack Quick Mount Spacers - Vortex Aero - 5 mm - Qty 2: Quick Mount spacers allow you to fit Rhino-Rack crossbars to Quick Mount legs 5-mm Thick Rhino-Rack Backbone Mounting
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars. vehicle with a naked roof Works with XS200, XS250, or INSUT feet Pairs with 4 feet and 2 crossbars (sold separately) to create a complete roof rack Clamps are designed specifically to fit the curves of your
Built for off-road use, this platform rack's large, flat surface accommodates loads of all shapes and sizes. Roof rack legs install to the fixed mounting points on your vehicle's roof. Compatible with many Rhino-Rack accessories. platform, 6 legs, and fit kit Specs: Dimensions: 75" long x 49" wide x 1-3/4" tall 5-Year limited warranty
Built for off-road use, this aerodynamic platform rack's large, flat surface accommodates loads of all shapes and sizes. Backbone mounting system provides a stable mounting surface for the platform. Compatible with many Rhino-Rack accessories.: Dimensions: 75" long x 49" wide x 1-3/4" tall 5-Year limited warranty
Built for off-road use, this platform rack's large, flat surface accommodates loads of all shapes and sizes. Roof rack legs install to the fixed mounting points on your vehicle's roof. Compatible with many Rhino-Rack accessories. platform, 4 legs, and fit kit Specs: Dimensions: 59" long x 54" wide x 1-3/4" tall 5-Year limited warranty
Filter Results
