Ladder Rack and Tonneau Cover for 2005 Nissan Titan
is there a tonneau cover that is compatible with the above in the subject? | I may have a solution for you, however because of how the Thule TracRac Universal Ladder Rack # TH91000 attaches over the bed rails of your Nissan Titan, there is not...
Spring Seat to Attach On Opposite Side of Trailer Axle # 6340624-EB
Can I order these axles with the spring seat on the top side. I have old dexter axles and the spring seat is on top I’m afraid my fenders will get in the way with if I have to mount the springs to the bottom of the axle | We don't have a version...
Will Road Armor Shock Absorbing Equalizer Kit Help With Up and Down Movement Of Trailer
I have a Grand Design 2600rb and a 1/2 Chevy. Ive been getting a good bit of up/down oscillations after hitting bumps. Ive confirmed my equalizer hitch is set up correctly. I installed a RoadMaster Active Suspension kit and set it at 1mm....
Correct Positioning of Shackle Strap
At what angle should the shackle strap be mounted? I have to weld on the leaf spring brackets. It wasn’t don’t properly the first time. I attached a photo of my current situation. I have to move the rear bracket back a little. | There is no...
Replacing Dexter 2K Trailer Axle with 70" Hub Length and 58-1/2" Spring Seat Length
I have a 5 X 8 utility trailer from Carry on. The axle is a Dexter 2K7058 which means the length is 70 and mounts 58. Mine is bent after purchasing 2 AKlHUB-545-2-LFEZ-1K trailer idler hub assemblies. The bearings were L44643. these were too...
Where Does Replacement Buckle Ends # PARTS-356A0001 Install on BAKFlip Tonneau Cover
Is this the strip that attaches on the back end of the cover next to the rear window? if not do you have that strip that attaches to the back end of the cover close to the rear window? Also I need the weather stripping for between the bed rails...
What is Best Way to Have Trailer Spindles Installed on Axle
Im building my own off road trailer being pulled by a utv. I think these spindles will be good. What is the best way to mount these spindles? Can they be drilled through to put a bolt through? | Spindles like # TRU94FR need to be installed...
How To Upgrade a Dexter D60 Axle To Use 8 on 6-1/2 Inch Hubs
We have a 2019 Forest River wolf pack with dexter D60s on it. The axles were manufactured in 2018. We have 6 lugs and need to upgrade our tires. We would like to go to 8 lug and load range G tires. Are these the hubs we want and can we just...
Recommended Removable Ladder Rack and Tonneau Cover for 2016 GMC Sierra 2500HD
Looking for a removable ladder rack and tonneau cover combo recommendations? | The ladder rack system that is easiest to remove from your truck is the TracRac SR which uses bed rail mount tracks that let you not only quickly remove the uprights...
How to Select 8-on-6-1/2 Hub Drums for Triple Axle Trailer
Looking at a trailer that has 3 dexter axles with the Dayton rims. What would it cost to do the conversion on all three axles? I was looking at the kits you have but couldn’t tell if it was a per axle kit or per wheel kit. 8 lug hub drum conversion....
Tonneau Cover Recommendation for 2018 Ford F-250 that TracRac SR Ladder Rack to Install
I have a 2018 F250 with a 6- 9inch bed. Can I install this rack with a Bakflip MX4? | There's really only one tonneau cover we can recommend with a TracRac sliding ladder rack like the part # TH43002XT-501 which is a fit for your 2018 Ford F-250...
Fixed Ladder Rack to Install in 2016 GMC Sierra Stake Pockets with and Fit with a BAK Revolver X2
Any ladder racks that keep the low profile of a BAK Revolver x2 tonneau cover by just using the stake pocket holes and not add the sliding rail system on top of the bed side rails. I know about the trac rac system but wanted something that...
What is Weight Capacity of BAKFlip G2 Hard Tonneau and Can it Be Taken Through Car Wash
Do you have to remove this cover if you go through a carwash? Is there a specified weight limit to the cover? looking at this for a 2017 RAM 1500 short bed thanks | The BAKFlip G2 Hard Tonneau Cover # BAK26207 referenced in your question is...
Recommended Folding Tonneau Cover for 2017 Honda Ridgeline
what is better? Hondas OEM or a BakFlip g2 or MK4, or another manufacture? thanks | I am not too familiar with the OEM tonneau cover for your 2017 Honda Ridgeline, but I did do some research on the cover so I could compare it to the aftermarket...
Trailer Hub and Drum Recommendation for Replacing Hub with Bearings 25580, LM67048
Wanting to put a standard hub with electric brakes on axle, these are old trailer house axles. Would like to use a 5 on 4.5 bolt pattern. Info I have is the inner bearing #25580, outer bearing LM62048 or LM67048, the second number is wore off...
Which Tonneau Cover and Sliding Ladder Rack Can Fit 2008 Chevy Silverado 3500 Long Bed
Ive got a 2008 SIlverado 3500 with 8ft bed. The width of the bed at the front is 64inch and the width at the back is 62 3/8. Does this Bak X4 account for this narrowing of the bed? Also can you tell me how much of the bed height I lose with...
Trailer Spindle and Hub That Uses Grease Seal 12407 and Bearings L44643
I recently purchased a small single axle trailer that was missing the hub and the spindle is trashed. The trailer is 48 inches wide with leaf springs and the axle is below the leaf spring. The metal axle is made of channel with a square spindle...
Adding Disc Brakes to 2010 Forest River Cedar Creek Silverback 5th Wheel Trailer
I have 2010 Forest River Cedar Creek Silverback fifth wheel and I want to convert to disc brakes. I presently have 9/16 lugs. Apparently your discs for 7000-lb Lippert axles only have 1/2 lugs. Will there be any safety issue going from 9/16...
Can the Agricultural Style 4 on 5 Inch Hubs Be Replaced with a More Common Bolt Pattern
I have the dexstar 4 bolt style rims on my trailer but they are the circle middle kind I was wondering if maybe I can switch the hub instead of the whole axle | It is possible to replace just the trailer hub instead of the whole axle but I would...
2003 Coleman Fleetwood Utah Replacement Brake Assemblies and Bearings
I am looking for auto adjusting brakes and bearings for my 2003 Coleman Fleetwood Utah pop up tent trailer. | From previous customers with your 2003 Coleman Fleetwood we've been able to determine that your trailer has 2,200 lb Dexter axles....
Can Dexter 10 Hub and Rotor # K08-435-05 be Used on EZ Lube Spindles
are these for a ez lube system. i have a 1987 ranger trail trailer and i need the hubs replaced. it has a zerk fitting on the end of the spindle. thanks | The Titan 10" Hub and Rotor # K08-435-05 that you referenced can be used with EZ lube...
Number 42 Spindle Recommendation for Mounting Trailer Hub for Spare
looking to mount a spare hub on my trailer frame 6 lug. I have the hub need the spindle that mounts on the side of trailer as a spare in case of hub and bearing fails | If you can get me more info on the hub I can see which spindle it would...
Does Rapid Switch System Pro Sport Ladder Rack for 2021 Toyota Tacoma Fit with F1 BakFlip
Is the Pro Sport system compatible with a BakFlip F1 cover? If so, does installation consist of replacing the rails which came with the F1 cover with new rails for the rack system? Installing on a 2021 Toyota Tacoma SR with 5foot bed and F1...
What is Difference Between Trailer Hubs 42866UC3-EZ and 8-219-4UC3-EZ
what is the difference to this part and 8-219-4UC3-EZ other than the price | The big difference is the grease seal inner diameter which basically indicates what spindle it would fit. The part # 8-219-4UC3-EZ has a grease seal with an inner...
Filter Your Search
Contact and Help