Do Factory Bump Stops have to Be Cut to Install Air Lift Air Bags on a 1997 Lexus LX450
Hi! Do I need to hack off part of the bump stop for this installation? Please send install procedure specific for a 1997 Lexus LX450. | Yes you will need to trim away the factory bump stops to install Air Lift helper springs # AL60728 on your...
Required Bike Rack Stabilizing Strap For CURT Hitch # 11510 on a 2011 Infiniti EX-35
where do I get the stabilizing straps necessary to support a bike rack? | The strap you will need is the CURT bike rack strap with cambuckle, part # 18050. CURT requires using a stabilizing strap with any hitch mounted bike rack or hitch accessories....
Is The Yakima Frontloader Bike Carrier Compatible with Factory Crossbars on 2012 Infiniti EX35
Will the Yakima Frontloader work on my 2012 Infiniti EX35 not FX35? I installed OEM crossbars but the spread is only 16inch measured open space between the two bars. The roof is sloped so Im concerned about there being too much pull and twist,...
Hitch-Mounted Bike Rack Recommendation for 2010 Infinity EX35 With Class l Hitch
I recently bought a Softride Dura Assist for the above vehicle. I believe that I have to return to another retailer because I loaded it with 4 bikes and it made an unsettling noise in the wheels when driving to destination. We had 4 people...
Recommended Tire Chains For Off-Road And Snow Use On 1996 Lexus LX450
Please recommend snow tire chains for my 1996 LEXUS LX450. The truck has a 2inch lift for additional ground and tire clearance. Tires are Goodyear Wrangler Duratrac 265/75-16. The chains will be used on four wheels on snow and ice covered paved...
Draw-Tite VS Curt Class III Receiver
I have a 1997 Lexus LX450 with the Draw-Tite Class III receiver installed. It has been there for quite a while and is has rusted so I thought it was time to replace it. I would like some information on Draw-Tite vs Curt for the class III receiver....
Can the Rola Enclosed Cargo Carrier be Painted to Match a Vehicle Color
Can you paint to match a vehicle color? | Paint would not stick well to the Rola enclosed cargo carrier. But if you can find the right kind of paint for the material (plastics) then you can certainly try. It may not last all that long and you...
Will Kuat NV Bike Rack Work On 2008 Infiniti EX35 With 1-1/4 Inch Trailer Hitch Receiver
I ordered a Kuat NV 1 1/4 inch for my 2008 Infiniti EX. Will it work properly? | There is a quick way to measure to see if your bike rack will fit. You will need a tape measure and a straight edge like a yardstick or a dowel. Place the straight...
Trailer Hitch Receiver Recommendation for 2011 Infinity EX35
Hi, looking for a hitch for my 2011 Infinity EX35. Infinity says towing not recommended. Looking to tow a 2500lbs boat? What hitch would you recommend? thanks | You are correct, Infinity does not recommend trailer towing due to the added stress...
Replacement Windshield Wiper Blades for 1997 Lexus LX 450
Why is one 16inches and one 18inches when both should be 18? 1997 lx 450 is the vehicle. is the scrubblade bigger? and has clearance issues? | Actually, Scrubblade recommends the # SC87FR 18 inch blade for the driver side and the # SC67FR 16...
Will Thule OutWay # TH45JV Trunk Mount Bike Rack Fit on 2008 Infiniti EX35
Will Thule OutWay th45jv Trunk Mount Bike Rack Fit on a 2008 infinity ex35? | The Thule OutWay Truck Mount Bike Rack # TH45JV will fit on your 2008 Infiniti EX35. In fact, there are several Thule bike racks that will fit your specific vehicle...
Replacement Bottom Strip for a Thule Aeroblade Crossbar
Do you have the lower rubber strip that goes in the Thule Aeroblade 7052? | For a replacement lower strip for a Thule Aeroblade crossbar you need the # 852-4498-001. |
Trailer Wiring Recommendation for a 2008 Infiniti EX35
Hello guys, I recently bought a trailer hitch from you guys and I cant wait to start towing my camping equipment I have a 2008 Infiniti ex35 and I have some questions about the trailer wiring harness. Not as it comes from factory it does not...
Can Kuat Sherpa be Used in Curt Hitch for 2011 Infiniti EX35
Can I fit a Kuat Sherpa 2.0 rack on my 2011 Infiniti EX35 with a Curt Class I receiver hitch? Also, how would I rig the Curt required support strap? Thanks for your help! | The Kuat Sherpa part # SH12G can fit Class I hitches like the Curt...
Hitch and Trailer Wiring Recommendation for a 2011 Infiniti EX35 Journey
Please help me with part numbers for a hitch and wiring harness for a 2011 infinite EX35 | For a hitch for your 2011 Infiniti EX35 you would want the Curt hitch part # C11510 as long as you have a Journey model. The recommended trailer wiring...
Curt Hitch and Rola Bike Rack Recommendation for a Infiniti EX35
I have a 2011 Infiniti EX35 and Im looking at either getting a back rack like this or getting a hitch mounted bike rack. I dont have a hitch on the vehicle, so I would have to get that in addition to a hitch mounted bike rack. In the notes on...
How Does the Curt Class I Trailer Hitch # 11510 Install on a 2012 Infiniti EX35
Hi, Could you email me the installation instructions? Id like to see whats involved and the difficulty level before ordering the unit. Many thanks! | I have attached a link to the installation instructions for the Curt Class I Trailer Hitch,...
Left Signal on Trailer Flashes when I Indicate Right Turn
I have a 96foot LX450. When I signal a left turn all works as it should. When I signal right, the lights on the right side passenger side of the trailer go out and the left turn signal blinks on the trailer. All the lights work properly on...
Trailer Hitch and Wiring for a 2008 Infiniti EX35
Where can I find installation instructions for this hitch is there a video that goes over how to install? | We have not had the chance to install Curt trailer hitch # C11510 on a vehicle which is why there isn't a video. But I have included...
Can The 7-Way Trailer Connection Be Used To Power Winch If Vehicle Is Running
Can the 7 pin plug be used to power the winch if I have my truck running? | The wiring that feeds the 12-volt accessory circuit on the 7-way trailer connector is of too small a gauge to allow enough power to pass through to run a winch. The...
Installing the Hopkins Smart Hitch Backup Camera on a 2013 Ram
I have this camera but it doesnt work on my 2013 Ram. Why not? | We have learned that the 2013 and newer Ram trucks do not provide enough voltage to power the Hopkins Smart Hitch, part # HM50002, simply by plugging it in to your truck. In...
Trailer Hitch and Bike Rack Recommendations for a 2009 Infinity EX35 2009
I want to put a 2 inch hitch on the back of my 2009 EX35 Infiniti to hopefully hold a bike rack for 3 bikes. However, another trailer rental company indicates that they do not have a hitch for this year car only 2008, 2010, 2011. Can you tell...
What Size Dowel Nuts Do I Need for My Vehicle?
Where can I find the dowel nut replacement bolt for gutter mount. Its for an 1996 landcruiser | We do have plenty of replacement dowel nuts like the Replacement M6 x 16 mm Dowel Nut for Rhino-Rack Accessories # RR56TB which are M6 x 16 mm threaded...
Bike Rack Recommendations for a 2008 Infiniti EX35
What would you suggest fr my EX35 that can accomodate 2 bikes | We have several 2-bike trunk mount bike racks that will fit your 2008 Infiniti EX35. However, if the vehicle has a rear spoiler there are no trunk mount options that will fit. Without...
Filter Your Search
Contact and Help