Curt Hitch and Rola Bike Rack Recommendation for a Infiniti EX35
I have a 2011 Infiniti EX35 and Im looking at either getting a back rack like this or getting a hitch mounted bike rack. I dont have a hitch on the vehicle, so I would have to get that in addition to a hitch mounted bike rack. In the notes on...
Will Circuit Protected Modulite Kit # C59496 Work On 2008 Infiniti EX35
Will this kit work on my 2008 Infiniti EX35? | The Circuit Protected Modulite Kit # C59496 will fit your 2008 Infiniti EX35. It will protect your vehicle and trailer against electrical shorts and mis-wire situations and will power your trailers...
How Does the Curt Class I Trailer Hitch # 11510 Install on a 2012 Infiniti EX35
Hi, Could you email me the installation instructions? Id like to see whats involved and the difficulty level before ordering the unit. Many thanks! | I have attached a link to the installation instructions for the Curt Class I Trailer Hitch,...
Required Bike Rack Stabilizing Strap For CURT Hitch # 11510 on a 2011 Infiniti EX-35
where do I get the stabilizing straps necessary to support a bike rack? | The strap you will need is the CURT bike rack strap with cambuckle, part # 18050. CURT requires using a stabilizing strap with any hitch mounted bike rack or hitch accessories....
Trailer Hitch Receiver Recommendation for 2011 Infinity EX35
Hi, looking for a hitch for my 2011 Infinity EX35. Infinity says towing not recommended. Looking to tow a 2500lbs boat? What hitch would you recommend? thanks | You are correct, Infinity does not recommend trailer towing due to the added stress...
Will Thule Passage 2-Bike Rack # TH910XT Fit on 2008 Infiniti EX35 Hatchback
Will this bike rack on my 2008 Infiniti EX 35 AWD Journey? Its a hatch back. Looks like it should work but not sure. Any information would be great. Thank you. | The Thule Archway XT 2-Bike Trunk-mount rack # TH910XT is a great choice for...
Is There a 2 Hitch Reciever Available for the 2010 Infiniti EX35
Id like a 2 receiver for my 2010 ex35. Is that possible? Its only for my bike carrier. | I have a solution for you, but there are no 2" hitches available for your 2010 Infiniti EX35 and even if you used a hitch adapter like the Brophy # HTAD...
Can The 7-Way Trailer Connection Be Used To Power Winch If Vehicle Is Running
Can the 7 pin plug be used to power the winch if I have my truck running? | The wiring that feeds the 12-volt accessory circuit on the 7-way trailer connector is of too small a gauge to allow enough power to pass through to run a winch. The...
Hitch and Trailer Wiring Recommendation for a 2011 Infiniti EX35 Journey
Please help me with part numbers for a hitch and wiring harness for a 2011 infinite EX35 | For a hitch for your 2011 Infiniti EX35 you would want the Curt hitch part # C11510 as long as you have a Journey model. The recommended trailer wiring...
Bike Rack Recommendations for a 2008 Infiniti EX35
What would you suggest fr my EX35 that can accomodate 2 bikes | We have several 2-bike trunk mount bike racks that will fit your 2008 Infiniti EX35. However, if the vehicle has a rear spoiler there are no trunk mount options that will fit. Without...
Recommendation for Transporting Wheelchair with 2008 Infiniti EX35
Can a bike rack be used to carry a wheelchair? If so what do you recommend for a 2008 Infinity EX35? Could the same rack be used on a Hyundai Santa Fe? | I may have a solution for you, however a trunk bike rack cannot be used to safely transport...
Will Kuat NV Bike Rack Work On 2008 Infiniti EX35 With 1-1/4 Inch Trailer Hitch Receiver
I ordered a Kuat NV 1 1/4 inch for my 2008 Infiniti EX. Will it work properly? | There is a quick way to measure to see if your bike rack will fit. You will need a tape measure and a straight edge like a yardstick or a dowel. Place the straight...
Installing the Hopkins Smart Hitch Backup Camera on a 2013 Ram
I have this camera but it doesnt work on my 2013 Ram. Why not? | We have learned that the 2013 and newer Ram trucks do not provide enough voltage to power the Hopkins Smart Hitch, part # HM50002, simply by plugging it in to your truck. In...
Can Kuat Sherpa be Used in Curt Hitch for 2011 Infiniti EX35
Can I fit a Kuat Sherpa 2.0 rack on my 2011 Infiniti EX35 with a Curt Class I receiver hitch? Also, how would I rig the Curt required support strap? Thanks for your help! | The Kuat Sherpa part # SH12G can fit Class I hitches like the Curt...
Do Factory Bump Stops have to Be Cut to Install Air Lift Air Bags on a 1997 Lexus LX450
Hi! Do I need to hack off part of the bump stop for this installation? Please send install procedure specific for a 1997 Lexus LX450. | Yes you will need to trim away the factory bump stops to install Air Lift helper springs # AL60728 on your...
Trailer Wiring Recommendation for a 2008 Infiniti EX35
Hello guys, I recently bought a trailer hitch from you guys and I cant wait to start towing my camping equipment I have a 2008 Infiniti ex35 and I have some questions about the trailer wiring harness. Not as it comes from factory it does not...
Hitch-Mounted Bike Rack Recommendation for 2010 Infinity EX35 With Class l Hitch
I recently bought a Softride Dura Assist for the above vehicle. I believe that I have to return to another retailer because I loaded it with 4 bikes and it made an unsettling noise in the wheels when driving to destination. We had 4 people...
Trunk Mounted Bike Rack Recommendation for a 2008 Infiniti EX35
Will this bike rack work with my car? Im attaching a photo of my car. Thank you! | Yes, I checked with Thule and the Passage part # TH910XT that you referenced has been confirmed as a fit for your 2008 Infiniti EX35 so it would fit and work...
Trailer Hitch and Wiring for a 2008 Infiniti EX35
Where can I find installation instructions for this hitch is there a video that goes over how to install? | We have not had the chance to install Curt trailer hitch # C11510 on a vehicle which is why there isn't a video. But I have included...
Draw-Tite VS Curt Class III Receiver
I have a 1997 Lexus LX450 with the Draw-Tite Class III receiver installed. It has been there for quite a while and is has rusted so I thought it was time to replace it. I would like some information on Draw-Tite vs Curt for the class III receiver....
Will the Yakima Ridgeback 2 fit a Curt Class I Trailer Hitch on a 2008 Infiniti EX35
I plan on purchasing the Curt C11510 Hitch for my 2008 Infiniti EX35. I believe the Thule Vertex 2 is compatible with this hitch and my vehicle. However, I would rather purchase the new Yakima Ridgeback 2. According to the Fit Check on the official...
Trailer Hitch and Bike Rack Recommendations for a 2009 Infinity EX35 2009
I want to put a 2 inch hitch on the back of my 2009 EX35 Infiniti to hopefully hold a bike rack for 3 bikes. However, another trailer rental company indicates that they do not have a hitch for this year car only 2008, 2010, 2011. Can you tell...
Brake Controller Installation on 1997 Lexus LX 450
looking for a Prodigy direct plug in wiring harness for a 1997 Lexus LX450. Do they make one or do I have to use a universal and wire it myself? | The 1997 Lexus LX450 was not factory equipped with the connector under the dash for a plug and...
What Size Dowel Nuts Do I Need for My Vehicle?
Where can I find the dowel nut replacement bolt for gutter mount. Its for an 1996 landcruiser | We do have plenty of replacement dowel nuts like the Replacement M6 x 16 mm Dowel Nut for Rhino-Rack Accessories # RR56TB which are M6 x 16 mm threaded...
Filter Your Search
Contact and Help