Result:

Do you sell a Bearing/Seal kit for a UFP Hub H-1062-2? I have seal savers installed on the spindles. I also need dust covers for the same hubs - 1.9700 in. Thanks | Hey Greg, There unfortunately there isn't a guide to tell us the bearing and...

I have a 2012 keystone hornet with Al-Co t44 axles and need to replace my brakes. 4400lb axles. Which brakes will fit? Also need p/n for the axle seal | For your AL-KO T44 axles, the brake assemblies you need are the Dexter Nev-R-Adjust Electric...

I need a hub for my 1995 Ranger-Trail trailer. The bearings used are Timken, L68149-20024. The entire assembly part number is 9606020 but I just need the hub with races and studs, part number 33662. I dont know if that helps or if that includes...

I have a 1990 Ranger Trail Trailer That Has Disc Brakes. Will This Part Fit My Ranger Trailer Spindles ? | The Dexter 10" Hub-and-Rotor Assembly # K08-435-05 is designed to fit a 3,500LB trailer axle with the Inner Bearing # L68149, Outer Bearing...

I have a 6x10 enclosed cargo trailer single axle can I put brakes on the axle or not it’s a 3500 lb axle on 5x4.5bolt pattern it’s does not have brakes on it now it’s just a axle | Hey Jared, If your axle has a brake flange like I have pictured...

I have a shot lander boat trailer with an existing DICO 45263 hub. I’ve read on here that the best replacement would be a hub with part AKIHUB-545-2-EZ. I would like to get those but on review of those hubs it states they are for 10”-12” wheels....

Hello, etrailer. I recently purchased a 70s model camper frame with old school suspension that I am looking for some help on I am thinking of building a tiny house on it. First question and the primary one this visit, is shock LC283280 what...

I installed the Tekonsha P3 controller with the ETBC7 kit on my 2000 Tundra to pull a 2005 Fleetwood RV camper. After I installed everything as explained in any and all instructions I hooked up the RV to test the lights and brakes. All lights...

How to adjust self adjusting brakes | I have included a link to a video on adjusting self-adjusting brakes. Basically there is a device on the adjustment wheel on these brakes that prevents the shoes from adjusting back inward. You have to sort...

Need a bearing kit for a 1995 ez loader trailer. Only number I could find was on one of the race, L68111. Seal was stuck so tight I destroyed the inner bearing and race driving it out. Thanks | Hey Kevin welcome back! The Hub Bearing Kit...

Hi, I have a new '24 GMC Sierra 3500 Denali Ultimate DRW that is giving me problems towing my '24 DRV Mobil Suites 41RKDB fifth wheel trailer. The integrated brake controller in my truck is sensing back-charging from my trailer (probably from...

Hello, I am going to change the bearings on my boat trailer. What do I need to do or to provide to insure that I purchase the correct parts? Thank you. | Replacing your boat trailer's wheel bearings and seals is easiest if you pull one of the...

Hub went out on my 1994 Jayco Eagle SD with dexter axle but cant find a hub to fit, searching for the hub sizing | I'm happy to help find a hub replacement for your Jayco Eagle, but in order to find the correct one, I'll need to know the inner...

Brake controller initially worked upon installing. About an hour into the trip, got a danger message on the phone that it wasn’t connected. Got out and checked and there’s no light on the unit. Truck is a 2017 Ram 1500. No corrosion or dirt...

It seems the 2022 Jeep Wrangler Limited Sport does not have a traditional brake light switch, how is this being installed? | To install the Roadmaster Brake-Lite Relay Kit for Towed Vehicles # RM-88400 on your 2022 Jeep Wrangler Limited Sport,...

Need a hub for K-H 71744 | We will need some more information in order to track down a new hub to fit your assembly K-H 71744. Pull off your old hub and look for numbers stamped into the bearings. If you do not see the numbers then you will...

Hello, I can not get my new Tekonsha P3 brake controller to recognize the trailer connection. I purchased the controller and the 2005 F150 specific wiring harness. It always says trailer not connected. I have visually inspected almost all of...

Need a hub for my 2006 boat trailer. Hub had model number and name on back H-1062-1 UNIQUE UNCTIONAL PRODUCTS | That number doesn't give me a cross-reference. To get a replacement you will need to pull the bearings out of the hub and on the...

Need a grass catcher for this toro timecutter model number 75742 42 inch deck can you help?? | If your Toro Timecutter has the Z cut deck that extends out further than the rear wheel, you'd use the Rack 'Em # RCMMS4-EXS1-TORO catcher. If you...

I need help identifing the axle on my old dual axle trailer. I was thinking of maybe adding electric brakes however it looks as if some sort of hydraulic brakes are on there. Also one axle has screw on grease caps on the hubs. Can you help?...

DO YOU HAVE TO BACKUP AND PUT ON THE BRAKES TO AJUST | To initially adjust the brakes, you will need to raise the trailer and secure it on adequate capacity jack stands. Check that the wheel and drum rotate freely. Do not lift or support trailer...

Just looking for a bag for a scag liberty z 48in model number, SMZL-48 | Hey Kyle, the correct Grass Catcher for your Scag Liberty Z48 is the part # RCMMS4-OBS1 that you referenced. |

What should voltage output from plug on vehicle be going to trailer brakes. Mine is .2 V. | There are many things that can affect the voltage on the brake output wire from your brake controller to your trailer brakes such as the power setting...

The video is for 2021 f150. Is it the same for 2023 f150 also. Are the wires in stock harness the same colors | Hey Brian. The Curt Trailer Connector Adapter item # C57672 is going to install in the same way on your 2023 F-150 as it did on the...