Result: knobs

Or do I just convert it to a knob? | I have a boat trailer with a dico 60 hitch on it. Stamped on it states it fits 1 7/8” and 2” balls. I need a replacement latch, the part that grips the underside of the ball. Does the...

I have adjusted the adjustment knob out and the wheel spins freely but is still locking up. | Hello, the left front brake on a tandem axle is locking up when they brakes are applied. I have adjusted the adjustment knob out...

I currently have to manually turn a knob on the trailer when I back up to turn off the braking, Id like to convert that over to have this automatic if possible. | Good morning, I have a 1998 ranger 620 that is on a 1999 Wood/Ranger...

To loosen, we depress this lever and we can rotate the hand knob counterclockwise to loosen from the trailer ball. | To loosen, we depress this lever and we can rotate the hand knob counterclockwise to loosen from the trailer...

The Valley Coupler #5122 on my trailer had a knob adjuster. I cannot find a replacement kit with the knob adjustment. | The Valley Coupler #5122 on my trailer had a knob adjuster. I cannot find a replacement...

It’s a 2016 OpenRange 3X fifth wheel. The knob is fine. | I’m looking for the window crank out assembly to open it. The threaded pin broke off inside. It’s a 2016 OpenRange 3X fifth wheel. The knob is fine. | Thanks for...

While we do not have the replacement locking knob you're needing for your ARKSEN bike rack we do have a wide variety of replacement bolts that we can help you with. | I have an ARKSEN hitch-mount bike rack, and a draw-tite...

How much do you tighten the adjuster knob once the ball is inside? | How much do you tighten the adjuster knob once the ball is inside? | The tightness needed for latching the Titan Zinc-Plated Brake Actuator # T43397007K to...

but I dont like the adjustable ball size turn knob... wondering if this product has the same bolt hole mounting so that I do not have to drill new holes in my trailer? | Im looking at this recommended via prior chat product Item...

This also installs really easily with the included brake controller harness but it only puts a small knob on your dash as well. | 2008 Nissan Frontier.. I installed an Etrailer hitch and 4 wire wiring harness several years ago....

But personally, I am not a huge fan of the tightening knob on the Titan actuator. If I was replacing an older Atwood, I would go with the Dexter DX7.5 Drop-N-Go. | I need a replacement actuator. Present one is Atwood MPD 85778...

This proportional brake controller can mount anywhere out of the way in your vehicle so it won't take up space. The control knob mounts in the dash for easy adjustment. Pressing on the knob activates the manual override and it uses a colored LED for diagnostics. |

I need a replacement bolt that lifts the claw inside a hitch coupler, screw tight with a knob style | I need a replacement bolt that lifts the claw inside a hitch coupler, screw tight with a knob style | Hey, Mike. Based off...

The other option we have for you is the Titan Coupler part # T2343400 which has the same multi-fit knob as the Fulton but the manufacturer does state will work with a 50mm hitch ball as well as a 1-7/8" or 2" hitch ball. |...

Hey Gary, since you wouldn't have a ton of room to mount a brake controller on your Harley I would go with the Redarc Tow Pro Liberty part # RED52VR which only requires putting a small knob on the "dash" of your bike. Now for brake assemblies I would need to verify what spindles you have on the trailer. |

It may be a lever or a knob that has to be turned. Some require a dual action move where you would push back or forward on the lever while lifting up on it. | How do u uncouple an ez trailer we just bought a used one can not...

The Redarc Tow-Pro Elite Brake Controller # RED44FR is compatible with EOH brakes and can actuate brakes on up to 3 axles. The control knob takes up minimal space and provides a factory look and with the plug-and-play wire harness # 331-TPH-010 install will be fast and easy. |

This brake controller has the smallest footprint on the market to give you more mounting flexibility. With just the knob showing it will also give you a factory look just like your OE brake controller. | I am considering the...

It is clear to me that something inside the brake controller after instalation that usually face you up must be leveled I guess to a horizontal position to make the controller work the right way. Using the knob level, When do you know the brake controller is in the correct level position? |

If you see Dexter or UFP on the coupler and it's a multi fit style coupler with the knob like what this repair kit has it's probably correct though. | I am looking for a replacement latch on a trailer that has an A frame...

The main unit installs out of sight with only the control knob visible in the cab. The wiring harness will plug directly into the tow port under the dash. | I have a 2021 diamond c 32’ trailer with drum brakes, I need to convert...

You could also try sliding the manual override a few times and adjusting the gain knob up and down to help clear the contact points. | I have 3.33 volts at the brake when applying brake pedal have controler set to 6 volts...

I have a draw bar mounted controller very basic single knob type. After a couple of hours driving the brakes begin to lock up with the slightest touch of the brake. | I have a camper trailer with electric drum brakes single...

If the controller has a manual leveling knob on the side make sure it is facing straight up and down. | I have a gooseneck horse trailer and every time I brake, the trailer wheels on the left side lock or stick. It sends the...