Result:

See thread below from a previous question. I have the Moryde 3000 equalizer and I see that the reccomended unit wont work. What are other options to correct this condition? | I do still have a few options for lifting the trailer but the Correct...

How many hanger extensions come with this? The picture and description says 8 but it seems to me that 12 are needed for a tandem axle trailer. | The Correct Track Trailer Alignment and Lift Kit - Tandem Axle # RR23QX does come with all of the...

Are the moryde style wet bolts long enough to use with the correct track lift kit? | If you install the Correct Track Trailer Alignment and Lift Kit # RR23QX it will require longer bolts but MORryde makes a kit specifically for this. To find...

It mentions buying an additional part to get the 2-1/4 lift in the highlights. What part is that? | Hey Richard, great question. To get the full 2-1/4" lift on a tandem axle setup, you actually need the triple axle kit part # RR55QX instead...

Why are some Spring Hangers for Correct Track longer than others? | The hangers will vary depending on the exact suspension set up from the manufacturer. With different spring combinations and number of axles used this will cause different parts...

I have a Jayco 2018 5th wheel with MORryde CRE3000 suspension. I am towing with a 2021 F250 4X4 Crewcab 6.9 Box with autoslide hitch I got from you. I need to raise my trailer by about 2 inches. I am confused with all the options, need help....

I have a 2022 GMC Sierra 2500 4WD and a brand new Grand Design Reflection 150 Model 270BN fifth wheel with a BandW Companion hitch. I’ve only towed the fifth wheel one time from the dealer to the storage facility but the trailer sits high in...

Hi, I am looking to get more height space between the tire and the wheel well out of my travel trailer, can i flip the shackles so they are opposite of the way they are now, to gain more room? All the videos and pictures show the shackles installed...

Lifting a 2020 Grand Design 260RD Fifth Wheel Trailer Hello, I am confused as to what product to purchase in order to get another 2 inch of lift on my trailer so that I can level it out with my new GMC 2500. | Thanks for reaching out! To lift...

Whats the best option to raise rear of trailer? already has flipped axle or spring on top of springs was stock. My 5th wheel hitch is 17inch from floor of bed its a Curt 20K slider and is already at lowest setting. Buy a lower hitch ? Which...

HI there, I have a 2024 Keystone Montana High Country 295rl, I can not find the pin box number. It appears to be the Lippert Trail-air Road Armor which may now be Curt Roto-Flex with the 1116 bolt pattern, two rows of three bolts on each side...

Jameson, What clearance issue arises for this with the CRE3000 kit? I am only interested in lifting my trailer and not shifting the alignment. | Hey Brian, I believe you are asking about the Correct Track lift kit part # RR23QX and why it can't...

My new 2025 Hyundai Tucson SEL does not come with the factory harness like the 2022-2024 models did. I dont want to splice into wires, so was looking at the Tekonsha ZCI but I see a previous Q indicated that it wont work properly with LED tail...

Hello, I have lippert 8K axles in tandem and need to raise the height of the trailer. On certain roads/driveways with a buckle on the ascent/decent, I am dragging the rear end of our 30foot trailer when having to back down an inclined dirt driveway....

I have a ford f450 4x4 with 8ft bed, I am having a slight issue with vertical bed rails clearance I currently have the following set up- MORryde Cushioned 5th Wheel Pin Box for Trailers Over 18K w/ Lippert 1621SHD Trailair Coupled to the...

hello, I have a 6x12 enclosed trailer. I would like to hook up some interior lights with a switch that I could use weather its hooked up to my truck or not. I would also like to be able to recharge the battery. | The best way to get interior...

I have a 2025 keystone Coleman 17b. I’d like to lift it a couple inches as it scrapes going into and out of my driveway. What Kit would you recommend? | Hi Justin; do the leaf springs run under your axle (underslung) or are they sitting on top...

has Lippert discontinued the Correct Track kits? | Yes, they have Dan. The alternative to the Lippert Correct Track is the Correct Track Trailer Alignment and Lift Kit item # RR23QX and item # RR55QX. These kits include brackets that attach...

My pops wants to hook up a seven pin directly from jack to truck. Is that possible ? The grounding, and color code. | For a 3500 lb Electric Jack, I recommend the Bulldog Powered-Drive Trailer Jack - Drop Leg - A-Frame - 14" Lift - 3,500 lbs...

I have a 2012 Honda Ridgeline with a factory 7 way plug. I have a trailer that Id like to add a single LED stop warning light. Many years ago I worked in the RV field and understand vehicle and trailer wiring very well. If the tow vehicle had...

I have a 2023 KZ travel trailer...seems that the manufacturer made a mistake with parts or design end result is trailer bottoms out as there is only About 2 of travel before it..Its a BAE frame as is well made as far as hangers so I not wanting...

Hi, I have a 2021 Ford F250 4x4 stock truck, no lift and tow a 2021 Grand Design Reflection 278bh. I tow with an Anderson hitch on the lowest sitting and the 5th wheel camper still sits nose high. The axels are already flipped, so I need a...

on the brake pedal wiring which wire should the red wire for my controller be connected. My truck did not come with the pre wired plug? | Since your vehicle does not have a brake controller port, you will want to use a universal wiring pigtail....

I have 7k axles on my 5th wheel. I would like to install 8k 7 leaf springs to give me more height when coupled to my lifted Ram. I really dont want to replace the hangers. Would this give me an inch or so of lift? Greg | Hi Greg; leaf springs...