Result: trailer reverse lights

Hey Dejay, while a Timbren kit and an air bag kit can fit together at same time if you find that you need both to prevent sagging it's very likely the case that you are exceeding the capacity of the vehicle and that's the real problem. What…

The hinge you referenced part #PLR2212-AS would replace what you have now on your horse trailer and the holes would line up. It looks like for your window you'd need a piano hinge that's about 2 feet long, but at this time we do not have any…

Thanks for the picture! It looks like space on your trailer's tongue is going to be a little tight for a weight distribution system. Plus it has an aluminum frame. The only way to address the sagging issue is going to be by upgrading your…

Yes, dielectric grease like the Dielectric Grease for Electrical Connectors #11755 can and should absolutely be used on electrical connectors like your 4-pin trailer connector. Dielectric grease does a great job of protecting your equipment from…

Hello Darin, thanks for reaching out. I do have a solution for you. What I recommend is the Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00. This is made for trailers with drum brakes, and it attaches to a 2" ball. It does not come with an…

Hey Scott! The Dexter DX6.6 Drop-N-Go Brake Actuator #DX79UR is not available with a solenoid since it was designed to be used with free-backing brakes. If you want an electric lockout you will have to add a solenoid #T4748800 to the brake actuator.…

If a trailer clearance light like part #MCL44AB1 is used, the one wire is the power wire for the light and the light will be grounded through the mounting hardware. If you want to use the ground wire that you have on your trailer you can install part…

Hey Patrick! Do you have drum brakes or disc brakes? Is the actuator 3-5/8" wide or is the channel tongue on your trailer that wide? I'm guessing you have a 3" wide channel tongue which is pretty standard. Do you need a coupler for a…

Hey Keith, thanks for reaching out! The wiring for the Optronics Smoke Lens ID Light Bar #OPT55KB is the following: RED - Stop WHITE - Ground BLACK - Tail YELLOW - Back-Up

There typically aren't any part numbers stamped onto the trailer spindle that can be used for identification. There are however numbers stamped onto the hub most times which can be used for identification. The TDE46210 tells me you have a 3,500…

I have added a photo detailing the wiring connections for the Pollack Heavy-Duty, 7-Pole, Round Pin conncetor, #PK11700, see link. This is a SAE J560 compliant connector. The wiring diagram for the vehicle side connector, #PK11720, is pictured also.…

There are brighter lights available for your current Bargman 92 Series lights, but none that have a reverse light function. So to replace your current lights with brighter LEDs you will need the LED Trailer Tail Light - Driver's Side…