Search: Reflectors > RV Light Fixtures >
Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hi Sergio! I don't know why they do this, but Lionshead is pretty notorious for discontinuing their wheel designs. The Bobcat happens to be one of those, unfortunately. It is one that we used to carry, so I have a good idea of what it looks like…
view full answer...There is a flange on the Tandem Axle Trailer Fenders w/ Backing Plates #HP82VR that overlaps the backing plate that you'll use for the welding surface. When it comes to welding, we always recommend having this done by an experienced welder.
view full answer...Hello Lance, thanks for reaching out. When replacing shackle straps and equalizers, the replacement parts must be identical in size to the original. Since your current shackles are 3.5" long, you will NOT be able to use the 2-1/4" shackles…
view full answer...I do have a solution for you, but the 24x60 etrailer Cargo Carrier #e98874 is not designed to be used on the back of an RV. Generally speaking, folding carriers are not ideal because they do not stand up too well to the extra stress exerted by the…
view full answer...The most effective way to wire your trailer would be to use a 7-way pigtail running into a junction box. For the pigtail, I'd recommend the etrailer #HS381-9000. Keep in mind, there's a couple of accepted wire color coding conventions, and…
view full answer...If you click on the link I've provided, you can see our Trailer Wiring FAQ article, which will show you exactly how the connector on your gooseneck trailer should be wired. I took the liberty of looking in on your order, and saw that you're…
view full answer...Although there isn't a specific kit available that addresses all your needs, you can use a light kit designed for an over 80 inch trailer like #TL16RK and modify it so it will work. You'd need some extra wire, #16-3B-1, an ID light bar for…
view full answer...If you will be running a ground jumper wire for each light on the trailer up to the junction box then you would need to also ground this bundle of wires from the junction box to the main trailer ground which is usually on or near the coupler. The…
view full answer...The LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - 14 Diodes - Oval - Pigtail #STL68RB will help give you backup lights, with 4 bright white LED's. Since you stated that your main goal is to gain backup lights, the Sealed…
view full answer...Hello Kaye, thanks for reaching out. We do not have any schematics or anything we can reference to tell us where exactly the factory wiring harness comes out of the frame. I did see a few pictures online that showed the wiring harness coming down…
view full answer...Hey Michael, so the LED Trailer Taillight part #STL73RB does not come with the reflector ring you asked about but you can pretty easily add it with the part #A211RXB.
view full answer...I went out in to our warehouse and pulled a Optronics Trailer Light #STL78RB and a Snap-on Reflector Ring for STL78RB Series LED Lights #A78RXB to show you what they look like together. I attached a picture and a video I shot also.
view full answer...Filters
- 20 results
Vehicle Fit
Filters
